20 Packs Stainless Steel Filter Garden Hose Washer, Self Locking Tabs Keep Washer Firmly Set Inside Fittings with 40 Mesh for 3/4 Inches Garden Hose and Water Faucet
Package contents: the package includes 20 packs of 40 meshes stainless steel filter garden hose washers with 4 small outer tabs for 0.75 inches garden hose, adequate quantity for you to use for a long term.
Design and function: these rubber faucet washers are designed with 40 mesh stainless steel filter and 4 small outer tabs.
To filter sand and gravel to reduce the possibility of nozzle clogging and to fix them in place firmly and properly, preventing washers from falling out of the hose fittings.
Size: outside diameter: 25 mm, inside diameter: 16 mm, thickness: 3 mm, stainless steel: 40 mesh.
The hose washers fit most standard 0.75 inches garden hose fittings with hose thread connections.
Excellent material: the washers are made of stainless steel and quality rubber, which is durable and sturdy, and convenient for you to use, giving you a good experience of using reliable rubber washers.
Use: the hose gaskets can repair a leaky water tap, disconnect water controller, and then twist the faucet and replace the broken one so that you can have a good replacement part for garden hoses with water tap.
Utah Pneumatic Plastic Push To Connect Fittings Tube 10 Pack 1/4\ Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4\ Straight)
utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings.
Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape.
All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned.
At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings.
Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with s....
The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
gohantee R134A Refrigerator Freon Recharge Kit- with BPV31 Bullet Piercing Tap Valve, Piercing and Self-Sealing Can Tap for R134a Air Conditioning, Include R134a Low Side Quick Couple
[WIDE APPLICATION] The air conditioning refrigerant auto ac recharge kit with gauge fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning..
[R134A CHARGING HOSE] 58 inch hose with gauge scale readings for R134, R12, and 22. Hose rated 3000 psi burst pressure and 600 psi max working pressure. 1/4 inch female SAE service port connection fits R12, 22, 502 fittings..
[BULLET PIERCING VALVE] BPV-31 bullet piercing tap valve Replace part No: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
[CAN TAP] Two can taps were equipped with piercing and self sealing style bottle which help to compatible with most can valves. Piercing can tap: 1/2″, Self sealing can tap: 7/16 28unf..
[SERVICE GURANTEE] Package include: 1Pc x R134A Air Conditioning Refrigerant Charging Hose with Gauge, 1Pc x piercing can tap, 1Pc x self sealing can tap, 2Pcs x bullet piercing valves with L keys, 1Pc x R134a Low Side Quick Couple. If you have any concern, feel free to contact us..
Robinair 10102 Side Can Tap for R12 and R134A Air Conditioning Refrigerants and Oils
Provides a quick and hassle-free way to connect to a can of R12 or R134A refrigerant, oil, or additive when working on automotive air conditioning systems.
Built-in, hinged can adapters allow use with multiple can sizes - even the small oil charge cans.
Tap includes standard male R12 and R134A fittings for easy hook up.
Schrader valves on fittings prevent leakage and allow for storage of partially used cans.
Crafted from a durable, super rigid plastic with a metal hinge pin that adds additional strength at this critical location.
Stores up to a full sized half shell Sankey standard keg or two sixth kegs.
does NOT support use of Coors, Miller rubberized or other oversized kegs.
Temperatures: Low 30s to mid 40s degrees.
rolling casters included for easy mobility.
For freestanding use only and indoor use only.
5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities.
Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8").
For a black version please see model KC2000TWIN, for a single tap KC2000SSA, single tap in black KC2000.
uxcell Adjustable Tap Wrench Handle, for Metric M1-M10 W1/16-3/8 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated
Tap Wrench: Fit tap size: M1-M10 (Mertic)/ 1/16" - 3/8"(UNC/UNF) / 1.5mm-10mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
uxcell Adjustable Tap Wrench Handle for 1/16\-1/4\ (UNC/UNF) / M1-M8 Taps, Tap Reamer Tapping Wrench Hand Tool with Plastic Dipped Handle
Tap Wrench Size: Fit tap size: 1/16"-1/4" (UNC/UNF) / M1-M8 (Metric). Black oxide coating for good abrasion resistance and rust protection. Hardened carbon steel sliding block for high hardness and strength..
Wide Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially suitable for larger-diameter taps..
Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread. Plastic dipped handle provides firm and comfortable grip in use when exposed to fluid or moisture..
Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other..
uxcell Adjustable Tap Wrench Handle, for Metric M1-M8 W1/16-1/4 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated, 2pcs
Tap Wrench: Fit tap size: M1-M8 (Mertic)/ 1/16" - 1/4"(UNC/UNF) / 2mm-9mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
