MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner
➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.
Aloris Tool AXA-1S Oversized Turning and Facing Holder
OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case
CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Vesici Turning Pizza Peel Perforated 8 Inch Round Aluminum Pizza Peel and 15.6 Inch Oval Shape Detachable Wooden Handle Pizza Paddle for Baking Homemade Pizza Bread 8 Inch
Durable and safe: this round aluminum pizza peel is made entirely from anodized aluminum finished with a wooden handle that is smooth to touch, for a....
Suitable dimension: the lightweight 8 inch metal turning pizza peel and a total length of 15.6 inch, wooden handle keeps hands away from the hot oven....
Perforated head design: turning pizza peel perforated allow you to use less cornmeal or flour when transferring the pizza from the work station to the....
Different uses: shovel is suitable for home and chef use, necessary tools for making cakes, pizza, delicate breads and pastries, no additional....
Helpful kitchen tools: this pizza turning peel is a practical and useful Father's Day, Mother's Day Gifts, Christmas Gift, Thanksgiving kitchen....
Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)
Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
woodturningTools and Accessories - 1pcs handle and 1pcs extensi....
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Multi Layer coating TiN/TiC/TiCN/TiN for turning and milling carbon and alloy steels, tools steel and stainless steel.
Provides longer tool life than uncoated grades.
Used for turning and finishing on a wide range of materials.
Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Steel Riveted Ferrules and 2 ea Round 2 ea 4 inch Radius Square and 2 ea Diamond Shaped Carbide Cutters
High-performance woodworking lathe tools: high-strength tungsten carbide steel cutter, stainless steel rod and aluminum alloy handle, excellent ergonomic design and reliable grip, each tool is exquisitely coated, beautiful and durable. Compared with wood turning tools with wooden handles on the market, it is more able to withstand vibration..
Rotatable blade design: The indexable hard alloy blade provides you with a new blade to maximize the cutting life of the blade..
Easy-to-use woodworking tool set: Using this tool, there is no need to learn and memorize complicated angles, suitable for woodworking or DIY enthusiasts of all skill levels. Whether you are a beginner or an experienced turner, our carbide turning tools can bring you outstanding results..
Stability in use: The four steel cutter bars are made of square high-carbon steel CNC. They are hard and not easy to roll, which improves the stability of the tool during use. It reduces the using difficulty for beginners and is suitable for woodworking enthusiasts of all skill levels..
Our turning kit includes: Roughing tool, Finishing tool, Detailer tool, Gooseneck Hollower tool, 11-inch handles, 10-inch handle extensions, 2 T15 wrenches, all in one In aluminum alloy display box..
