Best Intersecting Cutting Machine

DEWALT Laser Level, Multi-Line, Green, 30-Foot Range (DW089CG)

  • DEWALT laser level features green beam laser for clear visibility.
  • Laser level tool has 3-beam line laser to aid in 90-degree layout.
  • Built-in magnetic pivot bracket mounts of DEWALT green laser level easily on metal surfaces.
  • Accurate to approximately 1/8-inch at 30 ft. for level applications.
  • Micro adjust knob for precise alignment of 90-degree intersecting lines over greater distances.
Check Stock

DIYAREA 850W Commercial Meat Saw Bone Cutter 19.1'x14.2' Workbench for Butchering, 110V 1.2HP Butcher Bandsaw Electric Frozen Meat Cutting Machine with 4 Sawing Blade

  • Superior Material: The electric bone cutting machine is made of cast aluminum body and 304 stainless steel workbench, It is much more durable, rustproof, corrosion-resistant, and easy to clean. 850W powerful motor for our frozen meat cutting machine with pure copper material, lower noise, high efficiency.
  • Large Area Workbench: The DIYAREA 304 stainless steel workbench is 19.1"x14.2"), which can provide sufficient cutting space. It comes with 2 different sizes of saw blades for this electric bone saw machine, 4mm and 6mm to meet your needs. Additional blades are sold separately, please contact us if needed.
  • Accurate Cutting: Precision scale on the 304 stainless steel worktable, can adjust the cutting thickness according to your needs. Adjust the Knob to adjust the cutting thickness.
  • Easy and Safe to Operate: Two side blades on the push board make your cutting easier and safer, the safety handle design makes you away from sharp blades.
  • Wide Application: This 850w commercial bone saw machine can cut large-sized meat products like frozen meat, frozen fish, pork ribs.....etc. it is widely used in home kitchens, butchers, guesthouses, hotels, food processing factories, and slaughterhouse.
Check Stock

DEWALT Line Laser, Self-Leveling, Red, 3-Beam (DW089K)

  • DEWALT laser level has 3-beam line laser to aid in 90-degree layout.
  • Laser level tool has 2 times brighter diode to increase visibility in bright job-site conditions.
  • Self leveling laser level features built-in magnetic pivot bracket mounts easily on metal surfaces.
  • Accurate to approximately 1/8-inch at 30 ft. for level applications.
  • 1-button operation and control panel for ease of use.
  • Micro adjust knob for precise alignment of 90-degree intersecting lines over greater distances.
Check Stock

DIYAREA 850W Commercial Meat Saw Bone Cutter 19.1'x14.2' Workbench for Butchering, 110V 1.2HP Butcher Bandsaw Electric Frozen Meat Cutting Machine with 4 Sawing Blades Cutting Height 200mm

  • [Large Area Workbench] - The DIYAREA 304 stainless steel workbench reaches up to 19.1"x14.2", which can provide sufficient cutting space. It comes with 2 different sizes of saw blades for this electric bone saw machine, 4mm and 6mm to meet your needs. Asin of the extra blades: B09VNNPSF3.
  • [Superior Material] - The electric bone cutting machine is made of cast aluminum body and 304 stainless steel workbench, It is much more durable, rustproof, corrosion-resistant, and easy to clean. 850W powerful motor for our frozen meat cutting machine with pure copper material, lower noise, high efficiency.
  • [Accurate Cutting] - Precision scale on the 304 stainless steel worktable, can adjust the cutting thickness according to your needs. Adjust the Knob to adjust the cutting thickness.
  • [Simple and safe operation] - Two side blades on the push board make your cutting easier and safer, the safety handle design makes you away from sharp blades.
  • [Wide Application] - This 850w commercial bone saw machine can cut large-sized meat products like frozen meat, frozen fish, pork ribs.....etc. it is widely used in home kitchens, butchers, guesthouses, hotels, food processing factories, and slaughterhouse.
Check Stock

Genround Electric Bottle Cutter, Glass Bottle Cutter DIY Bottle Neck Square Bottle Wine Bottle Cutter Machine for Beer Liquor Whiskey Alcohol Champagne Bottle(Design by Genround in USA)

  • § PREMIUM MATERIAL: The electric bottle cutting machine is made of high-quality stainless steel, not easy to rust, smooth, wear-resistant, corrosion-resistant, tough, and durable..
  • § HIGH WORK EFFICIENT: The electric bottle cutting machine adopts 150W pure copper motor, which is full of power, and the speed can reach 6000r/min, which can help you cut quickly. Also, it's quiet, sturdy, and durable..
  • § ADJUSTABLE SPEED: The speed of the electric cutting machine can be adjusted in seven speeds. You can adjust it according to your needs, which is very convenient..
  • § EASY TO CARRY: The electric cutting machine has a small body and is easy to carry. And the operation is very simple, you don't need to worry about operation problems..
  • § WIDELY APPLICATION: Our bottle cutting machine can be used to DIY flower pots, pen holders, ornaments, and so on. You can create your own decorations for your home, contributing to environmental protection due to effective utilization..
Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

  • Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
  • Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
  • Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
  • 12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
  • What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..
Check Stock

CraftFIRST 9x12.5 Clear Cutting Plate 2PK for Gemini Die Cutting and Embossing Machine Logia A4 Die Cutting Machine

  • COMPATIBILITY- Compatible with Gemini Die Cutting & Embossing Machine Logia A4 Die Cutting Machine.
  • DIE CUTTING - Protects your dies and materials when passing through the die cutting machine.
  • DURABLE- Made of high quality Polycarbonate plastic, more durable than acrylic plates.
  • TRANSPARENT – The see-through PC plastic allows easy placement of materials for a precise die cut.
  • PRODUCT DIMENSIONS 9" x 12.5", contains two plates.
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • [DEEP CUTTING CAPACITY & FAST SPEED CUT] Our Re-Engineered High-Performance Plasma Cutter is So Robust, It Can Cut Up To 1/2" Inch Of Thick Steel ! Optimal Cut: 8mm Thick Steel, Max Rated Clean Cut Thickness Cut: 12mm Thick Steel (at 35A 110V 60 PSI), Maximum Severance Cut: 14mm Thick Steel (at 50A 220V 70 PSI) With Cutting Speeds Exceeding 100 Inches Per Minute Our Plasma Cutting Machine Is Extremely Fast.
  • Making It The Most Efficient Way To Cut Metal At Home Or For DIY Hobby Projects..
  • [CUTS LARGE VARIETY OF METALS] Our Plasma Cutter Uses High-Velocity Ionized Gas To Create a Flame Making it Capable of Cutting Any Electrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect....
Check Stock

Folding Machine Folding Papers in Factory

  • MACHINE COMES WITH - 1 Platform, 1 Thin Die Adapter and 1 Pair of Cutting Pads..
  • PORTABLE – The Sizzix Big Shot Foldaway die-cutting machine, features a cutting surface and handle that neatly folds away, meaning it’s perfect for creating on the go and freeing up space..
  • BUILT IN STORAGE – The compartments are built into the Foldaway, making easy to store your wafer-thin dies and keep your favorites close to hand..
  • RELEASE LEVER HANDLE – This release lever handle allows the handle to fold in front of the machine for neat storage..
  • CUTS AND EMBOSSES UP TO 6” WIDE – Making this machine perfect for paper craft, scrapbooking, home sewn projects, upcycling, card making and more..
Check Stock

Boston Gear HS610L Helical Gear, 45 Degree Helix, 14.5 Degree Pressure Angle, 10 Teeth, 1.340\ Hub Diameter

  • Gear with 45-degree helix angle for transmitting power between non-intersecting shafts.
  • Steel-hardened, polished teeth for resistance to wear.
  • Keyway and set screw for secure attachment to shaft.
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears.
Check Stock