3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.
【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).
Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit
Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices.
IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
IWISS Extractor Tool, Removal Tools for Weather Pack and Metri-Pack Connectors-3 Pack
Quality material: 4-claw picker is made of quality metal and plastic,strong and sturdy, Anti-rust and strong grip,U-shaped IC extractor and PLCC IC chip puller,they’re all stainless body and covered with PVC insulting shell,small size,easy to carry,The test pencil is mainly composed of plastic and colloid,can be applied for a long time..
Design and practicality: 4-claw design of 4-claw picker can firmly grasp small objects such as fixing screws, and it is not easy to fall.The non-slip material of the U-shaped IC extractor and the labor-saving U-shaped design can reduce hand fatigue, saving effort.The small hook design of the PLCC IC chip puller can quickly pull out and install the IC conductor without being hurt.The electric tester can test whether there is electricity to avoid electric shock..
Package content: 4-piece professional picking tool set. you will get a 4-claw picker ,a U-shaped IC extractor,a PLCC IC chip puller and a test pencil. It is an indispensable tool for maintenance workers, students and teachers who need experiments..
Universal sized: the total weight of the 4 pieces tools about 100 g. 4-claw picker each size 12 x 1 cm/ 4.8 x 0.4 inch, U-shaped extractor about 11 x 5 cm/ 4.3 x 2 inch, PLCC IC chip puller each size 10 x 5 x 1.5 cm ....
Shoeboy s Waterproofing Spray Large - Highly Effective Protection Against Water Dirt & Environmental Influences - 400 ML 1 Count
For all smooth and coarse leathers, textiles and all TEX materials with functional membranes..
Nano Protect is a highly effective product against wetness and soiling. Active ingredients form nanostructures on the material’s surface, giving the....
Water simply runs off and dirt has no chance of sticking. This gives the material deep protection against outside influence while preserving the....
Powerful water-resistant and dirt-repellent qualities from nanostructures on the surface of the material (no nano-particles). Nano-based active agents....
Active agents include waterproofing agents, secondary and nutritional agents and propellant..
DODOFUN CANBUS T10 Extra Bright Green Color Car Interior Exterior Replacement Bulb 168 175 194 2825 W5W etc. Size Map Dome Door LED Light 12V ~ 24V Error Free (Pack of 4)
Green blue color , built in CANBUS function, no error, 12-24V DC voltage, made with 10-SMD high power 3030-chipset , super bright 360°launch lighting , made with aluminum housing and smart IC driver, better heat dissipation, and long life.
Environmentally friendly, no mercury, UV, IR or other deleterious radiation.
35000 hours Long lifespan, more stable, no flickering, no tiny lighting when turn off, standard size as halogen bulb, easy to install, plug and play, 1 year warranty.
Att Formerly DIRECTV SMLD-00157-000 TiVo Replacement Remote
STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for..
COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!.
SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over t....
IR Emitter Extender cable,2-eye transmitter 20-60Hz) cable length 10FT,support TV,DVD,CD DVR cable box set-top box etc.
COMPATIBLE:with Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD....
IR Emitter Mini Stick-On Infrared Emitters Blink Eye. This mini emitter Emits IR signal from modulator to AV component. It is designed to be installed....
Two Heads allow you to control multiple pieces of equipment with only one IR output.
For use with IR extender extension system, Xbox One, IR....
IR emitter extension cable with single eye that is compatible with devices in 38khz and 3.5mm port.
Installation is quick and easy. Simply connect the IR Emitter to your remote control extender and put the IR eyes inside the cabinet. By placing the....
Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black
Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).