Best Is A Vortec Engine A Ls Engines

LSX Header Bolts for LS1 LQ4 LQ9 LS9 4.8 5.3 6.0 6.2L Grade 10.9 Silverado Tahoe (Iron)

  • These bolts are made with hardened Grade 10.9 steel, and can withstand a minimum tensile strength of 150,000PSI..
  • Flange Bolts are identified by the built-in washer under the head that acts to distribute the clamping load over a greater area..
  • They are designed to provide the same holding power as if you were to use a washer..
  • These bolts are superior to original or OEM product, and are made to withstand high strength and extreme conditions, generally found in Motorsports!.
  • Fits: LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8 5.3 6.0 6.2L with OEM Exhaust Manifolds & Aftermarket Headers..
Check Stock

JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug | 1.94” Intake / 1.5” Exhaust Valve | 170cc Intake Ports | .475” Max Lift

  • FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines.
  • UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports.
  • PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch.
  • REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation.
  • SPECIFICATIONS: 1.94” intake / 1.5” exhaust valve, 170cc intake ports, .475” max lift, straight spark plug design, 3/8 “ rocker arm studs, 64cc combustion chambers, 1.25” valve springs.
Check Stock

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

ICT Billet 4pc LS Cylinder Head Install Alignment Dowel Pin Steel LT Gen 3 Gen 4 Gen 5 LSX LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 L82 L83 L84 L86 L87 LT1 L8B 551275

  • Replace Your Rusty or Missing Dowels Before you Assemble Your Engine.
  • These are Required when Installing Cylinder Heads on Your LS Engine.
  • Compatible with all Gen 3 4 and 5 LS/LT Series Engine.
  • Includes 4 Dowel Pins Enough to install 2 cylinder heads.
  • Stock replacement cylinder head bolts also available for LS engines.
Check Stock

Michigan Motorsports LS1 Rocker Arm Housings with No Bearings - LS2 LS6 4.8 5.3 5.7 6.0 Trunion Upgrade

  • Fits LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 Fits 4.8, 5.3, 5.7, 6.0.
  • New LS Rocker Arms Perfect for Upgraded Trunions.
Check Stock

3mirrors Hydraulic Roller Lifters, Upgrade Hydraulic tappet Compatible with Chevy Buick GMC Pontiac GM LS1 LS2 LS3 LS6 LS7 LS9 LSX LQ4 LQ9 LY5 LY6 LM7 HL124

  • 【Premium Quality】: Ensun's Engine Valve Lifters automatically help maintain a 'zero' valve lash condition to help prevent valve train noise and unnecessary valve train component wear. Ensun's valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors..
  • 【Direct Fit】: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping；.
  • 【Fitment/Compatibility】: Fit for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L).
  • 【Replacement OEM ( Original Equipment Part) Number】: 12499225, 17122490, 12576400, 12648846, 17109057, 17120090, 17120735, 17121905, 25341990, HL124.
  • 【Buy with Confidence】: Order from Ensun, we offer a 12-Month Warranty, true worry-free shopping experience；.
Check Stock

ICT Billet Engine Safe Stand Adapter Plate Chevy LS1 Duramax BBC SBC LS Heavy Duty Support 551897

  • Don't Let Your Expensive Engine To Fall Off The Stand And Get Damaged.
  • Compatible With All Chevy Small and Big Block, LS LT Engines.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Allows The Use Of A Flywheel Or Flexplate.
Check Stock

Harmonic Balancer Puller Kit, Car Replacement Engine Crank Pulley, Portable Harmonic Balancer Puller Without Threaded Hol，Compatible with GM/Jeep/Chrysler, etc

  • ...ancer. Make the damper easy to disassemble..
  • 【Wide Compatibility Crankshaft Puller】Compatible with GM engine models: 5.3 L, 5.7 ls1 6.0 LS2 6.2 LS3 7. Engine models compatible with Chrysler/Dodge: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT (5.7L LT1003c4) series engines (threaded holes), not applicable to 2018 and newer Coyote balancers..
  • 【Crank Pulley Removal Tool with Clamp-in Design】 The tool adopts a "clamp-in" design, which can be disassembled without fastening the puller to the balancer, and is compatible with Jeep/GM/Chrysler/Dodge, etc..
  • 【Balancer Puller Made of Carbon Steel 】Using special carbon steel material, the surface is sprayed with anti-corrosion paint, which is corrosion-resistant and durable.The tool has enough weight and strength to ensure that it will not break during use. Save unnecessary cost, time and energy, remove dampers or harmonic balancers. remove dampers or harmonic balancers..
  • 【Easy-to-use 25264 Harmonic Balancer】Remove the harmonic balancer in just a few minutes. Lubricate and tighten the pressure screw, insert the jaws into the spokes, turn clockwise to engage the harmonic balancer, and hand tighten the pressure screw until it contacts the crankshaft. Fina....
Check Stock

67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • Bolts and nuts Kit built from 3/8" Steel and Precision CNC Machined for a great fit and Durability. Performance levels are 10.9, 10.9 and 12.9, much better than the other 8.8..
  • Upgrade manufacturing, T - shaped parts are marked with "TOP" for ease of use. This Valve Spring Compressor Kit is a great helper to remove old stock valve springs and install new valve springs..
  • This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!.
  • OE 67605, will be compatible with any LS engine for Firebird, Silverado, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more. Also compatible with Dodge Ram 318 360 5.2 5.9 Engine (but need to use your original bolts)..
  • *Springs are not included in the product. Read the instructions included in the package first. Tips: Adding lubricant will work more perfectly. It is not recommended to buy cheaper alternatives, which will not last long. Thanks!.
Check Stock

Michigan Motorsports LS1 Rocker Arms with Trunion Kit Installed - FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0 Bolts Not Included

  • Fits LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 Fits 4.8, 5.3, 5.7, 6.0.
  • New LS Rocker Arms with Upgraded Trunions.
  • Premium 8620 steel alloy trunnion and caged roller bearings.
Check Stock