Best Jegs Low Profile Floor Jack

BIG RED T815016L Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump 1.5 Ton 3,000 lb Capacity Blue

  • Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity.
  • Constructed of durable, high-strength aluminum and steel.
  • Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle.
  • Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock

TCE AT84007U Torin Hydraulic Low Profile Service/Floor Jack with Dual Piston Quick Lift Pump 4 Ton 8,000 lb Capacity Blue

  • Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8, 000 lb) capacity.
  • Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs.
  • Lifting range from 3-7/8" to 20" allows you can gain easy access under low-profile vehicles.
  • Wide stance provides added stability under load.
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Features a built-in safety overload system prevents use beyond load capacity.
  • Meets ASME safety standards and includes a 2 year limited manufacturer.
Check Stock

OEMTOOLS 24836 Hydraulic Floor Jack, 3-1/2 Ton Capacity, Car Jack Hydraulic Lift, Foot Pedal for Quick Vehicle Lift, Rapid Pump Jack, Rear Swivel Casters

  • HIGH-CAPACITY AUTO JACK: This hydraulic car lift is designed to lift 3-1/2 tons with minimal effort.
  • Reliable car floor jack, truck jack, SUV jack, and RV jack.
  • Lift jack not designed to support vehicles.
  • FAST LIFT FUNCTIONALITY: Our quick car jack includes a foot pedal for faster setup.
  • Excellent shop floor jack or garage floor jack for increased productivity.
  • Get to work servicing vehicles much faster with these floor jacks.
  • RAPID PUMP FLOOR JACK: This vehicle jack features a fast action dual pump design for quicker car lifting.
  • Heavy duty car jack makes it easy to lift and service standard vehicles.
  • Get the job done on time with this fast jack.
  • EASY TO MANEUVER: Our automotive floor jack comes with 360 degree rear swivel casters, making it an easy car jack to maneuver from vehicle to vehicle in your shop or garage.
  • PRODUCT SPECIFICATIONS: Weight Capacity: 3-1/2 Tons.
Check Stock

BIG RED AT84007R Torin Hydraulic Low Profile Service/Floor Jack with Dual Piston Quick Lift Pump 4 Ton 8,000 lb Capacity Red

  • Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity.
  • Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs.
  • Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles.
  • Wide stance provides added stability under load.
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Features a built-in safety overload system prevents use beyond load capacity.
  • Meets ASME safety standards and includes a 1 year limited manufacturer.
Check Stock

Pake Handling Tools Multi-Purpose Hydraulic Jack (5T) - Toe Jack - Heavy Duty Compact 360 Degree Rotation 11023lbs Capacity

  • MULTI-USE JACK: Use this quality, compact hydraulic jack for repairs, maintenance, or installation of heavy machines..
  • CONVENIENT HEIGHT: Lifts 1-9” and has a head lifting range of 14.5-22.5” to give ample room for maintenance..
  • POWERFUL: Capable of lifting 5 tons/11,023 pounds with ease..
  • 360° ROTATION: Can be used horizontally and vertically – the most convenient hydraulic jack yet!.
  • COMPACT SIZE: The low profile, compact design makes this jack easy to store and transport..
Check Stock

Simplex RJ84A Steel Mechanical Ratchet Jack, 5 Ton Capacity with 7\ Stroke

  • [LOW PROFILE] - Low Profile with lifting range 3-3/20" to 14".
  • Dual pump quick start: 7 pumps (no load).
  • [HYBRID ALUMINUM] - Hybrid aluminum & steel construction provides stability and endurance. Total 36 LBs weight. Light weight!.
  • [EASY TO USE] - Swivel rear casters and saddle provide smooth maneuvering and positioning.
  • [OVERLOAD PROTECTION] - Built-in valve protects against jack over-loading.
  • [WARRANTY] - Covered by a 1 year warranty on material and workmanship.
Check Stock

Cable Matters 10-Pack Low Profile 4-Port Cat5e, Cat6 Keystone Jack Wall Plate in White

  • 4 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
  • Accepts many types of keystone jacks including RJ45 Cat 6 Ethernet, HDMI, RG6 coax, banana plug, and more.
  • Single gang cover plate fits a standard-sized receptacle with the included mounting screws.
  • Add a new patch cable location using a low voltage mounting bracket.
  • Low profile cable wall plate with a cover that is almost flush with the wall.
  • Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.
  • Cost effective 10 pack of keystone jack wall plates provides enough outlet plates for a few renovation projects at home or in the office.
  • UL listed keystone jack (E486099) wall plate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic construction.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock