Best Jetson Impact

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
  • WiKi for reference: wiki.geekworm.com/T300.
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)

  • Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
Check Stock

7inch HDMI LCD (H) (with case) 1024x600 Capacitive Touch Screen IPS Display HDMI Monitor with Toughened Glass Cover Case for Raspberry Pi 4/3/2/1 B B+ A+/Jetson Nano/Windows 10

  • Compatible with Raspberry Pi 7 inch touch display screen LCD, 1024x600 hardware resolution, configurable by software (up to 1920x1080),Toughened glass capacitive touch panel, 6H hardness.
  • Supports popular mini PCs such as Raspberry Pi 4/3/2/1 B+ B A+ zero zero w,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.
  • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.When works with Jetson Nano,supports Ubuntu, single point touch, driver free.
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
  • 3.5mm audio jack, supports HDMI audio output, Also supports VGA input (specific cable is required and should be purchased separately),High quality PC case, optional tilt angle: 30°/50°.
Check Stock

Makeronics Developer Kit for Jetson Nano -7inch Touch| IMX 219-77 Camera with Case| 64GB Class 10 TF Card with Card Reader | Jetson Nano Acrylic Case For Both A02 and B01| 8265 Wireless Card + Antenna

  • ✔️Include Nano Acrylic Case(black),7inch HDMI LCD 1024x600 IPS Capacitive Touch Screen , 8265 wireless card with 6DB antenna,IMX219-77 camera board with camera holder, 64GB class 10 TF card along with a card reader. HDMI cable. Notice: Jetson Nano Board is not included. The newly updated case (start from 2020/07/15) is compatible for Jetson Nano board B01 and A02 Version..
  • ✔️[Power on and Reset Function] Equippped with power switch and reset switch.
  • ✔️[Dedicated PWM Cooling Fan] DC 5V,4Pin reverse-proof connector(with PWM function), Dimentsions 40mmx40mmx10mm,Make Sure Nano Work Stable..
  • ✔️[Wireless-AC8265] Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. Equipped with dual 6DBi antennas.
  • ✔️[PROFESSIONAL SUPPORT] Detialed instruction manual. Quick-responding technical support..
Check Stock

Metal Case with DC Brushless 5V PWM Fan for NVIDIA Jetson Nano Developer Kit,Cooling Fan and Metal Enclosure with Camera Holder Reset and Power Buttons Compatible with IMX219 Camera,Wireless-AC8265

  • The package includes Metal Case and 5V Dedicated PWM Adjustment Cooling Fan, for Jetson Nano Developer Kit. (NOTE: Jetson Nano Developer Kit is NOT included)..
  • The Metal Case with Clever design:easy access to the peripheral connectors.
  • with camera holder,dedicated place to mount your camera.
  • RESET and POWER buttons,It is easy to operate..
  • The Metal Case is Compatible with peripherals,eg:Camera: IMX219- 77 / 77IR / 120 / 160 / 160IR / 200 Camera, RPi Camera V2 / RPi NoIR Camera V2.
  • The metal case Structure Introduction:Camera holder, dedicated place to mount your camera.
  • Easy access to the extension header, with clear label.
  • Opening for onboard connectors and cooling fan.
  • The Fan supports 5V voltage.PWM Speed Adjustment, Strong Cooling Air.The Cooling Fan with 4PIN reverse-proof connector.Dimensions: 40mm×40mm×20mm.
Check Stock

Ingcool 4G/3G/GNSS HAT Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano, Based on SIM7600A-H, 4G/GNSS Module Support LTE CAT4 up to 150Mbps for Data Transfer, etc.

  • SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
  • Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

NVIDIA Jetson AGX Orin Developer Kit

  • 【Fully Compatiblility】 This Aluminium Heatsink fully compatible with Jetson Xavier NX Module..
  • 【Essential for High-performance Computing】 Keeps module temperatures low to avoid overheating and throttling..
  • 【Effective Thermal Management】 Full Aluminum heatsink with fan..
  • 【Easy to Install】 Mounting bracket & screws included..
  • 【Easy to Carry】 This Aluminium Heatsink has a small size with dimensions: 58mm x 38mm x 18mm..
Check Stock

Jetson Bolt 14in

Check Stock

The Jetsons Ship T-Shirt

  • Big Wheel: The Jumbo comes with eight-inch wheels for a sturdier ride.
  • Travel Light: Lightweight design and easy folding mechanism make picking up and carrying the Jupiter easy.
  • Bright Idea: 7 light patterns come preprogrammed.
  • Built for fun: Sturdy wide deck and durable frame are built to last.
  • Brake Style: The Jetson Jupiter comes with rear braking..
Check Stock

Yahboom Jetson Nano Robotic Developer Kit AI Smart Robot for Adults Camera Programmable Electronics Project for 4GB Autopilot Object Tracking Face Color Recognition (Without Jetson Nano 4GB)

  • 【Smart Robot for Adults】Jetbot robot is a DIY multi-function tank AI education robot based on NVIDIA Jetson Nano A02 or B01. Robotic combine with NVIDIA Jetson Nano to truly lower the threshold of artificial intelligence, which make AI interesting more suitable for learning and competition..
  • 【Omnidirectional HD Camera】Jetbot has 3-dimensional camera head, which realizes up and down, left and right, front and rear control of the 800w HD camera, real-time video transmission, and obtains the first perspective of the lens.It is a pair of eyes that can be moved manually..
  • 【Rich Functions and Playing Methods】If the Jetbot robot's autopilot, object tracking, face recognition, color tracking, edge detection, automatic obstacle avoidance, refuse classification and other functions can be fully utilized, your competition is very exciting and your partner will cheer for Jetbot..
  • 【Offers 31 Full Open Source Code】You can implement all the functions of the robot based on the step-by-step course materials provided by Yahboom. However, this is a programmable robotic car customized for teenagers over 18+ or adults. We re....
Check Stock