DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
EdgeStar BR7001SSOD Full Size Built-In Outdoor Kegerator Conversion Refrigerator Only - Stainless Steel
Drip tray, guard rail, & stainless steel top cover included.
Interior fan directed to air cool your tower.
Possible keg configurations: 1 full size keg, 1 oversized beveled edge keg, 1 quarter keg, 1 slim quarter keg, up to 3 sixth barrel kegs, up to 3 Cornelius kegs, 1 slim quarter w/ 1 sixth barrel keg, 1 slim quarter w/ 1 Cornelius.
PLEASE NOTE: Delivery will be curbside, inside delivery is not available. A valid phone number is required for delivery purposes, please ensure the correct phone number is provided in your shipping information when placing this order..
Kegco Kegerator Full Size Keg Refrigerator - Single Faucet - D System, Stainless Steel
INCLUDES COMPLETE KEG TAPPING KIT: This high-quality keg beer cooler comes complete with everything you'll need to dispense fresh draft beer straight from the keg - you just add the keg! The single faucet keg beer dispense system includes a brand new 5 lb. aluminum CO2 tank, a single gauge CO2 regulator, a D system lever handle keg coupler that can tap all domestic kegs, and a 3" diameter chrome plated metal draft tower. The CO2 tank ships empty and will need to be filled locally..
LARGE INTERIOR: This keg cooler has a large enough interior to fit one full size, pony, or quarter slim keg, two 5 gallon commercial kegs along with one 5 gallon home brew keg, or up to three 5 gallon home brew kegs. When you aren't using it to dispense tasty glasses of cold draft beer, the keg refrigerator can be easily converted into a regulator refrigerator using the two included adjustable storage shelves, providing additional refrigerated storage for food and beverages..
SLEEK AND STYLISH DESIGN: This kegerator's sleek black cabinet features a reversible stainless steel door for a modern look that will complement any decor. Easy roll casters make it easy to move your beer dispenser from your bar to your patio, and they lock to prevent it from moving once it's in positio....
INCLUDES COMPLETE KEG TAPPING KIT: With this Kegco beer keg dispenser, you get everything you need to begin dispensing delicious draft beer straight from a keg. The two tap dispense system includes a brand new 5 lb. aluminum CO2 tank, a single gauge CO2 regulator with air distributor, two D system lever handle keg couplers that can tap all domestic kegs, a 3″ diameter dual faucet chrome plated metal draft tower, and two chrome beer faucets with brass levers. The CO2 tank ships empty..
LARGE INTERIOR: This keg cooler has a spacious interior that can accommodate one full size, straight pony, or quarter slim keg, and up to two sixth slim, strap handle, or rubber home-brew kegs (it will not hold bevel or rubber kegs, commonly used by Miller and Coors). If you need additional cold storage when not dispensing kegs, two removable wire shelves are included to allow you to easily convert this keg refrigerator into an all-refrigerator or beverage center..
SLEEK AND STYLISH DESIGN: Your kegs are housed in a sleek black cabinet with a decorative black door, which is sure to look great in any room of your home. This unit also features a textured serving countertop with an attractive metal safety rail that keeps your glasses and beer mugs from sliding off, a....
COMMERCIAL OR FREESTANDING USE: The Kegco Z163B-2 features a durable construction, high powered performance, and quiet and energy efficient operation that make it suitable for both commercial and residential applications. It has been CSA certified to conform to NSF/ANSI 7..
INCLUDES COMPLETE KEG TAPPING KIT: The Z163B-2 comes complete with a double tap draft dispense system and everything you need to tap two domestic D system kegs, including a dual faucet stainless draft tower, two chrome faucets, an empty 5 lb. CO2 tank, a double gauge CO2 regulator, and two D system keg couplers..
POWERFUL COOLING TECHNOLOGY: Intuitive push button controls and a clear LED display make it easy to precisely set the internal temperature between 32 and 75 degrees Fahrenheit, one of the widest available temperature ranges of any keg dispenser on the market today. Fan-forced cooling helps maintain the optimal refrigerated storage environment, and an air-cooled draft tower ensures that every drop of beer remains refreshingly chilled from the keg to your glass..
CONVENIENT DESIGN FEATURES: This beer dispenser has all of the same great features that you've come to appreciate in other Kegco models, like an easy-to-clean removable built-in drip tray, a chrome guardrail that....
Stainless Steel keg Coupler Ball Lock Posts Adapter,Sankey keg to Ball Lock Quick Disconnect post,Fits to D Type Keg Coupler FPT 5/8 Thread Stainless Steel Gas & Liquid Post for Homebew
【Food Grade Material】Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. 2pcs Silicone gaskets are for free..
【Two Way to Identify Gas &Liquid Post】 The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side.
【Quick & Easy To Convert】This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers).
【Hand Or Plier To Install】Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don’t over tighten to avoid deforming the washer.
【Easy To Clean 】To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don’t suggest you take apart this conversion kit,cuz it is very difficult to reinstallation.
