Best Keyed Shaft

TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

TB Woods Type JA JAM14MM Sure-Grip Bushing, Metric, 14 mm Bore, 34.9 mm OD, 25.4 mm Length, 198 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 198 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type SH SH118 Sure-Grip Bushing, Cast Iron, Inch, 1.125\ Bore, 1.871\ OD, 1.25\ Length, 3500 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Rareelectrical NEW TILT TRIM MOTOR COMPATIBLE WITH YAMAHA 4-STROKE F90TLR 6D8438800100 6D8-43880-01-00 6D8438800100

  • Compatible with CAT, YAMAHA and many more... Please verify your OEM part number from your original unit to help ensure fitment..
  • Replaces: YAMAHA: 6D8-43880-01-00 6D8438800100 6D8-43880-00-00 6D8438800000 6D8-43880-09-00 6D8438800900, ITEM DESCRIPTION: TILT TRIM MOTOR, UNIT TYPE: YAMAHA, VOLTS: 12, ROTATION: REVERSIBLE, OD: 2.563IN / 65.1MM, SHAFT: 0.311IN / 7.9MM, LENGTH: 5.496IN / 139.6MM, SHAFT: 3.4MM KEYED, CURRENT TYPE: DC, WEIGHT: 3.43 LBS / 1.56 KG, NOTES: OE SHAFT LENGTH MAY VARY - USE SUPPLIED COUPLER IF LONGER SHAFT LENGTH IS NEEDED, NOTES: 4 BOLT MOUNT, NOTES: O-RING ....
  • Computer tested for consistent Quality and unsurpassed reliability.
  • Trim Motor - Voltage: 12V Source: Aftermarket.
Check Stock

2 HP SPL 3450 RPM, 56 Frame, 120/240V, 15/7.5Amp 5/8\ Shaft, Single Phase NEMA Air Compressor Motor - EM-02

  • Single phase Full Load amps: 15/7.5Amp, 120/240V.
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16".
  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY.
Check Stock

Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

5 HP SPL 3450 RPM P56 Frame Air Compressor 60 Hz Electric Motor 208-230 Volts Century Motor Single Phase# B385

  • ★⚙️5 SPL HP 3450 RPM, 208-230V, 60Hz.
  • ★⚙️Full Load amps: 15.0, 56 Frame, Rigid Base.
  • ★⚙️Open Drip-proof, Ball Bearings, SF: 1 Protection.
  • ★⚙️Rotation: CCW Facing End Opposite Shaft.
  • ★⚙️Notice: This is your electric motors TRUE power rating. HP ratings have been made suspect over the years by large retailers who like to use "peak HP" or " SPL " in their terminology. The Motor's amp rating does not lie. Please make sure your FL amp (FULL LOAD) rating on the motor you're replacing is within 10% of the FL Amp rating of the motor you intend to buy..
Check Stock

Gordon Glass Co. Bauer T-323T Matching T-Handles Lock Set | Keyed with Key J327 | Primarily Used by Leer and Century Fiberglass Truck Caps.

  • Most popular T-handle that is used by many truck cap manufacturers. Primarily used by Leer Fiberglass Truck Caps and Century Fiberglass Truck Caps. .
  • Keyed alike, Clockwise and Counter Clockwise T-Handles.
  • Zinc die cast with a black powder coat finish.
  • Mounting: Blind 1-1/2cc with 3/8" Lugs, Tapped 10-24 x 3/8 Inch | Shaft Length: 2" (1/2" threaded).
Check Stock

Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock