Best Kill A Watt Meter

Cobra HGA 1500 Hga1500 36 Inch Magnetic Mount CB Antenna Heavy Duty Magnet, for use In Cars, SUVs Recreational Vehicles 300 Watt Power Handling Capability

Built to outperform the competition - a non-abrasive heavy duty 4 inch magnet ensures that once the antenna is placed, it will stay there as long as you need it to.
The ultimate recreational magnet mount antenna - ideal for trucks, SUVs, and recreational vehicles this antenna will stay on when you need it, But is completely removable when not in use. Use the coax 15 feet of matched-braided Coaxial cable to attach to any CB or 10 meter radio RF Pl259 connector.
Works with all CB & 10 meter radios - 100 Watt rating with broad-banded frequency of 26-30mhz and weather channel ready.

Measures 0 to 60 Volts. Works on 12, 24, 36, and 48 volt battery bank systems..
Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 7 mA..
This is the All-In-One Meter:It is convenient to calculate the voltage, current, power, discharge amount and discharge time of the aircraft, which is convenient for calculating the force effect of the multi-axis aircraft..
Perfect troubleshooting tool:it's indispensable for analyzing, testing and troubleshooting any DIY DC power project..
Professional RC Watt Meter is an excellent addition to your RC hobby, DC circuits, Solar system, Boat/RV & Battery Backup systems!.

Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 meter depth range).

The most effective working frequency is 10Meter to 15Meter, lower fever and lower VSWR.
About the working general output for AM & FM mode is around 100W and the most effective output is around 200 W with input 5 W and around 200-250 when the input is 10W..
The frequency of the connecting antenna is very significant. It is also should be connect with the amplifier corresponding frequency. If it is lower or higher than the required, it will not work and even will not only burn out the amplifier but also will damage the radio..
If you want to reach the PE MAX output, please check that the input should exactly 10W or 5W, the DC Power should actually be over 14V and 18A and also other conditions should be perfecT. Different mode have the different input requirement..
However, we do not suggest to work the PE Max for a long time,it will decrease the amp' life time and also if the antenna can not endure the output watt, which will damage the amp, thank you very much!.

LONG RANGE COMMUNICATION: One watt of power provides up to 250,000 sq. ft. / 20 floors of long distance signal range with 2,662 channel combinations..
22 PRESET CHANNELS: Channels are preset with privacy codes to minimize unwanted interference from others..
WATERPROOF & DUSTPROOF - IP67 STANDARD: Complete protection from dust and withstand water immersion for 30-minutes in 1-meter deep water..
SHOCK RESISTANT: Can withstand 2-meter drop plus rugged anti-slip design..

The most effective working frequency is 10Meter to 15Meter, lower fever and lower VSWR.
About the working general output for AM & FM mode is around 100W and the most effective output is around 200 W with input 5 W and around 200-250 when the input is 10W..
The frequency of the connecting antenna is very significant. It is also should be connect with the amplifier corresponding frequency. If it is lower or higher than the required, it will not work and even will not only burn out the amplifier but also will damage the radio..
If you want to reach the PE MAX output, please check that the input should exactly 10W or 5W, the DC Power should actually be over 14V and 18A and also other conditions should be perfecT. Different mode have the different input requirement..
However, we do not suggest to work the PE Max for a long time,it will decrease the amp' life time and also if the antenna can not endure the output watt, which will damage the amp, thank you very much!.