R134A Self Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter and Valve Core Remover for Air Conditioner Manifold Freon Charging Hose
【R134A SELF SEALING CAN TAP 】This R134a self sealing can tap valve only fits for self sealing cans（such as Walmart sells 12oz Self-Sealing Container） with 1/2'' ACME thread and this 134a self sealing can tap cannot be used on puncture style cans. Please be careful when you buy..
【WIDE COMPATIBILITY】This R134a self sealing can tap can directly connect 1/4" SAE (R12 R22) female fitting AC charging hose and through the tank adapter （ 1/4" SAE female x 1/2" ACME）to connect 1/2" female AC charging hose..
【MATERIAL】Both the r134a self sealing can tap and the tank adapter are made of solid premium brass which make them can even work under extreme conditions, features with long-lasting seals to prevent leaking..
【VALVE CORE REMOVER】Our R134A can tap comes with extra automotive high and low pressure side service port valve core removal, dual head with thick and thin heads will fits most models..
【SERVICE】Our QC department do 100% quality inspection on the R134a self sealing can tap before delivery. We will give you a 100% satisfactory solution if the R134a self sealing can tap is defective. Your valuable suggestions and advice will be greatly appreciated by our team..
Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew
????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Refrigerator Freon Recharge Kit, R134a Refrigerant Recharge Kit, Fridge Recharge Kit, with 1 BPV31 Bullet Piercing Tap Valve, 1 R134a Self-Sealing Adapter, for Home AC Refrigerant System
【R134a Refrigerator Recharge Kit】The ac recharge kit for refrigerator includes: 1pcs fridge r134a refrigerant charging hose with gauge, and piercing r134a can tap, 1pcs RH thread r134a self sealing adapter, 1pcs bpv-31 bullet piercing tap valve.
【R134a Fridge Recharge Hose】One side of the refrigerator recharge hose is puncture style r134a can tap, the other side is 1/4 SAE female prot to connect refrigerator male port. The middle multicolour gauge can read for r134a refrigerant, Colorful gauge design is easy to read.
【RH R134a Self-Sealing Adapter】The RH r134a self-sealing adapter can be used with the puncture type can tap of the charging hose, to connect self sealing r134a refrigerant can.
【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
【Premium Material】The R134A A/C service hose kit is made of metal and high quality rubber material, with solid construction and stable performance.
【Wide Compatibility】The Car HVAC refrigerant recharge kit fits for R134A R12 or R22 refrigerant refrigerant to home air-conditioning or fridge.
DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're....
BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port
BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
... Double Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wre....
Mudder 5 Pieces BPV31 Piercing Tap Valve Kits U-Charging Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/ R22 Port AC 1/2 and Universal Retrofit Valve with Dust Cap
Package content: 3 pieces BPV-31 piercing tap valve kits (each kit contains 1 piercing valve, 1 hex key and 2 adapters), including R134a u-charge hose....
Easy to install: our BPV-31 piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and use, and....
R134a Charging hose with gauge : 24 inch hose with R-134a can, it is a good air conditioning conversion adapter kit, it's completely applied to....
Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Compatible with 1/4 inch, 5/16 inch, 3/8 inch....
Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
R134A Refrigerator Freon Recharge Hose Kit-R134a AC Refrigerant Charging Guage Hose Set with BPV31 Bullet Piercing Tap Valve and R134a Self-Sealing Adapter, for Home A/C Refrigerant System (Red)
...efrigerator Freon Refilling Hose with Guage】The one side of piercing r134a can tap can directly connect puncture refrigerant cans, other side of 1/4 SAE female prot to connect refrigerator male port. And the gauge with colored dials with fahrenheit has scale readings for R134/R12/R22.
【BPV-31 Bullet Piercing Tap Valve】This bpv31 piercing valve can be used for 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Besides, this bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
【Wide Compitable】 This refrigerator freon recharge kit can be comepitable with R-134a R-12 R-22 types freon for home air condition refrigerant systems. 【R134a Refrigerant Recharge Kit】The r134a refrigerant charging hose kit comes with 1pcs r134a freon recharge hose with guage, 1pcs bpv-31 bullet piercing tap valve, 1pcs RH r134a self-sealing adapter.
Refrigerator Freon Recharge Hose with Gauge Kit-A/C R134a R12 R22,Universal Retrofit Valve,with BPV31 Bullet Piercing Tap Valve,R134a Self-Sealing Adapter for Home/Car A/C Refrigerant System (5)
...GE:The ac freon charging hose equiped with the scale guage reading for r134/r12/r22 types freon, piercing r134a can tap to connect puncture r134a refrigerant cans male mouth, r134a service quick coupler port to connect car ac r134a service male port. Directly used for car r134a ac refrigerant system.
BULLET PIERCING VALVE KITS：BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31，A practical kit and convenient for you to use，Each kit including 1 piercing valve, 1 hex key, 2 adapters.
【AC Retrofit Valve】The r134a refrigerant charge hose also can be used for home refrigerator ac refrigerant system through equiped with this ac retrofit valve.【RH R134a Self-Sealing Adapter】Through the r134a self-sealing adapter, the r134a can tap off the refrigerator charging hose can compatible with r134a self-sealing cans. Male to connect the r134a can tap, the female to connect self-sealing cans..
PREMIUM MATERIAL:Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant metal that won’t wear out or rust over t....
