Best Large Od Seamless Pipe

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

SBDs (Pack of 10): 1/2\- 9/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.5 Inch Pipe Post Tubing Rod OD Protective Cover. (10, 1\ Inside Height)

  • SBDs (Pack of 10): 1/2"- 9/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 0.5 Inch Pipe Post Tubing Rod OD Cover - 1" inside Height..
  • These caps are for a tube/thread with OD 1/2" only. These are strechable by 1/16" without tearing off.Please check the Out Side (OD) Diameter of the pipe / Screw you are using for to match the ID 1/2" of the plug listed. These caps have 1/2" Inside Diameter and are suitable for screws / pipes with 1/2" Out Side Diameter..
  • These caps are manufactured by ISO 9001 certified molding company "CAP0LUGS. USA YOU CAN TURST FOR THE QUALITY AND ACCURACY IN PRODUCTG MEASUREMENTS..
Check Stock

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

(Pack of 4) 1-5/8\ to 1-11/16\ Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.625 Inch Pipe Post Tubing Rod OD Cover - 1\ inside Height.

  • (Pack of 4) 1-5/8" to 1-11/16" Round Black Vinyl Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover | for 1.625 Inch Pipe Post Tubing Rod OD Cover - 1" inside Height..
  • Please check the OD of your tube before placing order as the size mentioned here is for OD of the tube and not ID.
  • Please note that the ID of the cap is 1-5/8" and good for tubes with OD 1-5/8". It works tight fit on 1-5/8" OD.It can stretch by 1/16" without tearing and be used on 1-11/16" OD tube..
Check Stock

1 Inch CTS Yellow Medium-Density Poly Pipe Line for Gas Distribution PE2708 100 Feet

  • Yellow Medium-Density poly pipe for natural gas or liquid propan distribution. Bimodel MDPE (PE2708).
  • Min. Wall Thicknes: 0.090 (100 Foot Length).
  • Outstanding strength and durability providing longer pipeline service and enhanced pipeline integrity..
  • Provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system..
  • IMPORTANT NOTE: There are various pipe sizes described as 1". This for CTS pipe not IPS pipe. These are different pipe sizing standards with different....
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

Rohn 25G 50' Tower with Hinged Base (Fold Over Base)

  • ...you must consult a professional installer. We make no claims that this set up will handle any certain wind/ice/load specifications. This kit is offered as a convenience to our customers*.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

PROCURU 10-Pack PushFit Angle Stop Valve 1/2\ x 3/8\ OD Compression, Quarter-Turn Shutoff for Bathroom Fixtures - Faucet, Toilet, Lead Free Certified

  • PUSHFIT INLET: 1/2" Nominal (5/8" OD) for 1/2" Pipe.
  • OUTLET: 3/8" OD Compression for faucet/ toilet supply connector.
  • FAST & EASY INSTALLATION: No need for installation tools, glue, torch, or soldering! Simply push-to-connect pipe made of Copper, PEX, CPVC..
  • FEATURES: Quarter-Turn ON/OFF, Heavy duty solid grade brass, Chrome plated.
  • CERTIFICATIONS & COMPLIANCE: UPC, NSF, ANSI, Lead Free Act.
  • WHAT'S INCLUDED: PushFit Angle Stop Valve, Quantity of 10.
Check Stock

DEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
  • Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check Stock

DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check Stock