Best Lateral Thigh Stepper

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length:9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

Goplus 2 in 1 Under Desk Elliptical Stepper, Resistance Adjustable, More Stable with Heavier Weight, Portable Mini Magnetic Step Machine, Compact Strider

  • Ergonomic Design for Safety and Comfort -- This Stepper is designed with two large, non-slip textured pedals to secure your feet. The elliptical motion protects your knee joints from injuries. This portable machine can be used for a workout either while seated or standing making it very flexible and convenient..
  • Flywheels Combined with Silent Belt Drive -- The balanced flywheel creates more momentum for a longer time allowing you to go for longer distance creating real outdoors jogging experience. Furthermore, silent belt drive mechanism ensures smooth and whisper-quiet operation so you can workout discretely without disturbing anybody around you..
  • Adjustable Tension Levels for the Different Motion -- This elliptical stepper has an excellent tension control system allowing you to adjust the tension level manually for an easier or more difficult workout. With a tension knob step adjustment you can stimulate the exercise effects of real jogging and climbing. Thus this elliptical stepper meets the speed, strength and endurance requirements of a wide variety of users..
  • LCD Display Monitor to Track Exercise Data -- This stepper is equipped with an easy-to-read LCD screen for keeping track of your motion parameters in real time, such as time, speed, distance,....
Check Stock

3Pcs Nema23 Stepper Motor Mount 57 Stepping Motor Mounts Mounting Base Plastic Bracket Clamp Support Holder Fixed Seat for CNC Router Milling Engraving Machine DIY Acessories

  • 【Usage】for Nema23 Stepper Motor Bracket/57 stepper motor.
  • 【size】 57*57*40cm【Material】Plastic.
  • 【Package Includes】3pcs 57 Stepper Motor Mounting Bracket.
  • 【Precise Hold-cutting】This motor mount bracket owns convenient mounting holes. These holes is cut by puncher, perfect matched with the 57 stepper motor..
Check Stock

Cross Training Bundle KIT (5 PC Set)- 20 FT Agility Ladder, XL Resistance Parachute, Power Sled, Lateral Side Stepper, and Dual Resistance Band for Improving Foot Work and Speed

  • ...usiasts! Increase the speed, strength and endurance in your legs, and improve agility and coordination of the body too..
  • This kit includes: (1) XL Resistance Parachute with Harness, (1) 20 Foot Agility Ladder, (1) Dual Resistance Band with Velcro Adjustable Waist Belt, (1) Lateral Stepper Ankle Resistance Band, (1) Power Sled with Push Handles and Padded Harness..
Check Stock

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor

  • Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs..
  • Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor.
  • 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution.
  • Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

  • 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
  • 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
  • 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
  • 【4】The largest 32 divisions of the 6 models are optional.
  • Suitable for 4 wires, 6 wires and 8 wires stepper motor..
  • 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Niceday Steppers for Exercise, Stair Stepper with Resistance Bands, Mini Stepper with 300LBS Loading Capacity, Hydraulic Fitness Stepper with LCD Monitor

  • 【Easiest Fitness Equipment】The Niceday stepper accelerates the fat burning of the buttocks and legs through continuous stepping. Persistent use can quickly reduce the lower limbs' fat and enhance muscle strength, achieving the goal of lifting buttocks and thinning legs..
  • 【100% pre-assembled】 The Niceday stepper is ready to use right out of the box. The compact size fits in any limited space, so you can start stepping anywhere. It is an enjoyable workout no matter stepping while watching TV or doing leg training beside a standing office desk..
  • 【Absolute Stability & 300LBS Loading Capacity】The loading structure of the Niceday stepper is made of 1.5MM thick commercial steel, which ensures absolute stability and 300LBS loading capacity..
  • 【Dramatically Fat Burning】Niceday stepper's resistance comes from the smoother & quieter hydraulic system. The dual hydraulic cylinder design ensures stability while dramatically increasing resistance and fat-burning volume..
  • 【High Aerobic Exercise】Niceday stepper will maintain high resistance for 30 minutes i....
Check Stock

DonJoy Tru-Pull Lite Knee Support Brace: Left Leg, XX-Large

  • Ideal for runners, recreational athletes, or individuals who are looking for extra patella (kneecap) support during daily activities.
  • Comfortable patella support brace for mild to moderate patellar dislocations.
  • Includes removable plastic hinges which provide additional medial/lateral stability. Provides a consistent pull on the kneecap during flexion and extension, which realigns the patella.
  • Fit tip-take the measurement of your thigh and calf 6 inch above and below your kneecap using a flexible type tape measure. Use the diameter you measure here to choose your size.
  • This product is designed to be tight. If you are between sizes, we recommend going to the next larger size.
Check Stock

DonJoy Tru-Pull Lite Knee Support Brace: Left Leg, X-Small

  • Ideal for runners, recreational athletes, or individuals who are looking for extra patella (kneecap) support during daily activities.
  • Comfortable patella support brace for mild to moderate patellar dislocations.
  • Includes removable plastic hinges which provide additional medial/lateral stability. Provides a consistent pull on the kneecap during flexion and extension, which realigns the patella.
  • This product is designed to be tight. If you are between sizes, we recommend going to the next larger size.
  • Fit tip-take the measurement of your thigh and calf 6 inch above and below your kneecap using a flexible type tape measure. Use the diameter you measure here to choose your size.
Check Stock