Best Lead Wire

Bulldog Winch 10039 Trailer Winch (12000lb Trailer with 90 Ft. Wire Rope, Roller Fairlead, Mounting Plate, Low Profile), 1 Pack

  • All in one design, Includes mounting plate with counter sunk Bolts for easy flat deck mounting..
  • Fairlead mounts to plate above deck level..
  • Includes spring Steel tension plate for wire rope for easy rope management and spooling..
  • 2-in-1 controller: wired controller with 20 ft. Lead also can be Switched to wireless mode with lead unplugged.
Check Stock

IRWIN VISE-GRIP Wire Stripping Tool/Wire Cutter, 8-Inch (2078309) (Pack 2)

  • Irwin 2078309 Wire Stripper, 10 to 22 AWG Cutting, ProTouch Grip Blue/Yellow Handle.
  • Multi-tool strips and cuts wire from 10 to 22 AWG..
  • Pliers style nose allows pulling and looping wire. Bolt cutter leaves ideal lead thread.
  • Induction hardened cutting edge. Wire crimper for insulated and non-insulated terminals. Meets or exceeds all ANSI standards.
Check Stock

AUSTOR Pack of 6 Solder Wire 60-40 Rosin Core Solder 0.6mm Electrical Soldering Wire 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, can be accomplished quickly, and fit for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters: Tin 60% and Lead 40% is perfect for electronic assembly, flux 1.8% is good for soldering, 0.6mm diameter for good joints to prevent component overheating.
  • Easy to carry: you can take the solder wire anywhere with your pocket. And the plastic tube will protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating.
  • Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

5 In1 Lead Free Solder and Solder Flux Kit | 50g Lead-Free Solder Paste | 0.6mm Solder Wire with Rosin Core | 5 Pcs Replacement Soldering Iron Tips | Solder Supplies for Electronics Metalwork Weld

  • [Good quality soldering wire] Lead free solder wire with rosin core: 0.6 mm/ 0.023 inches.Materials: Sn99.3%, Cu0.7%. Weight: 50gram/0.11lbs/1.76ounces.Lower Melting Point, good welding performance..
  • [Rosin Solder Flux] Lead free flux, PH7±0.3, Weight: 50gram/0.11lbs/1.76ounces. Solder flux facilitates the flow of solder, solder paste can increases efficiency of the soldering process,allows solder to form strong..
  • [5 Solder Tips] Copper tips are plated with iron, nickel .5 Pcs replacement soldering iron tips for different shapes and sizes.This speical customized tip set can achieve almost any soldering application you need..
  • [Protect users and the environment] We use lead-free formula to ensure that your welding work will not harm your health due to lead smoke.At the same time, lead-free products will not damage our environment due to product residue..
  • [Surprise price]Buying this set will save you more money than buying any of the products in the kit separately.If you are not 100% satisfied just contact us, we will provide you with a full refund or exchange immediately! No any risk, add to your cart now..
Check Stock

Tens Lead Wire Adapters Convert 3.5mm Snap to 2mm Pin Quan 4 Discount Tens Brand

  • Converts snap lead wires into pin style lead wires..
  • High quality and very durable lead wire..
  • Use the common 2mm pin style electrode pads.
Check Stock

Partsam Pair 3.9" Side Marker & Clearance Light Red Waterproof Black Base Mount 3LED, Sealed Thin Line LED Trailer Marker Clearance or ID Lights w/Miro-Reflectors

  • Package includes 2pcs Red 3LED 12V Truck Trailer Clearance Lamp Side Marker Light.
  • including stainless screws for installation in package.
  • NOTE: The covers are removable. Please snap off the lens and install the base with screws, then snap it on, very secure.
  • Waterproof Lens,sealed Light Led marker trailer.
  • dimensions without base: 98 x 31 x 26(mm).
  • Universal for Pickups,Truck Trailers,SUV van Caravan and Boat Lorry Bus.
  • Replace rear clearance lights on RV or replace boat trailer clearance lights.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • HARDWIRED WITH 2 WIRES(NO SWITCH): red wire is the lead and black the ground.
  • draw exactly 40 milliamps of current at full brightness.
  • Led Marker light,Auto side Lamps,clearance light,identification light,Trailer Light etc. Easy installation: waterproof, well sealed.
Check Stock

Nilight - TL-32 2PCS 3.9Inch 3 LED Truck Trailer Red Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Rock Light Waterproof Sealed Surface Mounted

  • featured functions: used as led marker light at front rear side roof top or led clearance light indicator light on any 12v pickups truck trailers suv rv van caravan camper boat lorry bus etc..
  • upgraded leds: use 3 quality piranha led, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent red light..
  • awesome reflector design: the marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance..
  • highly sealed: lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. be ready for all weather abuse..
  • simple installation: black wire for ground, red wire for positive. just fix the black base with the 2 flat head screws provided, and then snap the light into the base. to run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole..
Check Stock

VeniCare 4pcs Tens Unit Lead Wires for Intensity 10 Tens 2500 3000 EMS 7500 Twin Stim

  • Compatible forTens/EMS Machines electrode lead wires 2mm Plug.
  • Fit for most portable electrotherapy units.
  • The lead wire is used to connect the current from the TENS device to your electrodes.
Check Stock

Oopswow Outdoor Solar Rope Lights, Solar Powered Outdoor Waterproof Tube Light with 200 LED, 37.7 feet 8 Modes Copper Wire Fairy Lights for Garden Fence Patio Yard(Multicolor)

  • Brighter Solar Rope Lights with 200 LED Mini Bulbs -- 2021 Upgraded Rope String Lights, Oopswow has changed 100 LED bulbs into 200 LED Bulbs with 32.8ft long wire+4.9ft lead wire to provide more brighter lights for our customers. Using it to decorate your patio, yard, courtyard, terrace, balcony, BBQ, home will be a great choice to create a wonderful atmosphere for them at night..
  • Better Waterproof than Normal Copper String Lights: 1 pack 200 super bright led bulbs on 39.5feet(6.5ft lead wire) high quality copper wire.The copper wire is wrapped with ultra thin waterproof membrane, which makes it IP65 waterproof. Flexible, soft copper wire makes it easier to wrap around trees, fences, and create any shape you like..
  • 8 Lighting Modes:Which includes combination, waves, sequential, gradual, chasing flash, slow fade,twinkle flash, steady on, which can meet all your requirements for different lights. You can adjust different lighting modes according to different situations and mood..
  • Note:When you charge solar energy, make sure the ON/OFF switch at the botton to ON positionif it is OFF,the charge will not work).Charging environment, direct sunlight, charge 1-2 hours - light up 2-4 hours, charge 4-8 hours - light up 6-12 hours. If there is no sunlight on a clo....
Check Stock