Best Leaf Spring Valve

JEGS Valve Spring Shim Kit | 1.25” OD / 0.812” ID | Made In USA | Includes 3 Sets Of 16 Shims

  • KIT INCLUDES THE FOLLOWING: (16) 0.015" (blue tempered spring steel), (16) 0.030" (case hardened steel), (16) 0.060" (case hardened steel).
  • CASE HARDENED 0.030 and 0.060 thick valve spring shims and blue tempered spring steel 0.015 valve spring shims.
  • MADE IN USA with high quality materials and assembly.
  • EASILY WITHSTANDS THE ABUSE of a high-performance engine or daily driver.
Check Stock

8 Drop Leaf Supports in Antique Copper - 1 Pair

  • Hinged supports that use spring tension to hold a table leaf in the up position.
  • Includes two drop leaf supports with finger pull.
  • Perfect for accent tables and end tables.
  • Two supports per table leaf are recommended unless the leaf is very small.
  • Maximum weight capacity per pair is 20 pounds.
  • Material: all steel with antique copper finish.
  • Mounting screws and installation instructions included.
Check Stock

COMP Cams 5308 Pro Valve Lock Removal and Installation Tool for 7mm, 8mm and 5/16\ Lock

  • For 7 millimeter, 8 millimeter and 5/16 inches locks.
  • To install locks compress valve spring, place locks on magnetic stem, push body of the tool over the locks, position them on the valve stem and then release.
  • To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed.
Check Stock

Texas Speed TSP .660 Dual Valve Spring Kit Titanium 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3

  • Texas Speed TSP .660" Dual Valve Spring Kit Titanium 4.8 5.3 6.0 6.2 LS1 LS2 LS3.
  • Polished dual spring kit with light weight titanium retainers.
  • Includes valve seats with integrated valve seals.
  • Perfect for all aftermarket cam that have less than a .660 lift.
Check Stock

Supreme Suspensions - Rear Lift Kit for 2000-2010 Chevrolet Silverado 1500HD 2500HD 3500HD 1½ - 2 Rear Lift Kit Add-A-Leafs 37.5 Long + Isolator Pads + Square Bend U-Bolts 2WD 4WD 8-Lug

  • COMPATIBLE WITH 2000 - 2010 Chevrolet Silverado 1500HD, 2500HD and 3500HD (2WD 4WD). Only fits 8-Lug Models with single-pin leaf packs Only..
  • CONTENTS: 2x High-Strength Steel Add-A-Leafs, 4x Vibration Isolator Pads, 4x Square Bend U-Bolts, Installation Hardware, Installation Instructions and....
  • TECHNICAL NOTES: 1.5-2 inch rear suspension lift, depending on the condition of your leaf packs. Leaf Specifications: 2.5" Wide, 36.5" Top Length,....
  • INSTALLATION: Easy 'bolt-on' installation takes 1 to 2 hours. A Leaf Spring unloading/compressing tool is required for a safe installation. An....
  • BENEFITS: Supreme Suspensions Add-A-Leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to....
Check Stock

Douper 100N/22lb Gas Spring Hinge Slow Down Drop Leaf of Cabinets Desks Slowly Open Drop Leaf Pack of 2

  • SPECIALLY DESIGNED FOR DROP LEAF--The hinge will work perfectly if your drop leaf weighs less than 22lbs. It is not used for supporting lid or keeping it stay..
  • STURDY GAS SPRING—Pressure: 100N/22lb. Suitable for: 16-22lb drop leaf. Made of solid brass and iron, sturdy gas spring helps to lower the lid softly and close it easily. With Chrome plated, it is durable and corrosion-resistant..
  • SOFT DROP-DOWN—It is designed to damper the drop-down rate of a drop leaf, such as that of cupboard, cabinet and shoebox, and prevent quick and dangerous closure..
  • EXTEND AUTOMATICALLY-- Overall length: 7.9in (compressed) to 11.4in (stretched). Travel-3.5in. The space-saving hinge will extend automatically as you pull the lid open, and will not get in the way..
  • EASY TO INSTALL by following the instructions.
Check Stock

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock

HJGarden 1Set Green Leaf Shaped Cookie Cutter Stamper Mold DIY Tool

  • The perfect combination-including 4PCS leaf spring cake molds, maple, oak, double leaf and basic leaf to meet your basic needs..
  • Safe material-This fondant leaf cutter is made of food-grade plastic and the packaging is intact..
  • Easy to use-The plunger cookie cutter has an elastic plunger, which is very simple and quick to use..
  • Mini size-The size of each biscuit stamper is about 2 inch with excellent leaf design details. Hand wash and dry thoroughly..
  • Multi-purpose-Pie leaf cutter is suitable for pie gum paste, fudge, chocolate, etc., to help you make the perfect autumn, harvest or Thanksgiving pie..
Check Stock

Ossur AFO Leaf Spring for Mild to Moderate Drop Foot Ankle-Foot Orthosis | Lightweight Low-Profile Heel-less Design for Optimum Comfort | Flexible Customizable Sole | Large - Left

  • SUPPORTIVE BRACE FOR MILD DROp FOOT - Ossur's AFO Leaf Spring is a lightweight but strong ankle-foot orthosis designed to support mild drop foot. The....
  • SUITABLE TO BE WORN WITH MOST SHOE TYPES - The well-designed semi-rigid section for toe clearance provides effective dorsiflexion and support during....
  • FLEXIBLE SOLE FOR CUSTOM FIT - The flexible footplate goes inside the shoe replacing the insoles – it can be trimmed with a pair of scissions and....
  • STRONG DESIGN - Made from flexible prefabricated, injection molded polypropylene, this well-constructed and durable AFO leaf spring is designed with....
  • IMPORTANT SPECIFICATIONS - AFO Leaf Spring is only meant for mild drop foot secondary to neurological conditions. It is not to be used in case of....
Check Stock

Ossur AFO Leaf Spring for Mild to Moderate Drop Foot Ankle-Foot Orthosis | Lightweight Low-Profile Heel-less Design for Optimum Comfort | Flexible Customizable Sole | Large - Right

  • SUPPORTIVE BRACE FOR MILD DROp FOOT - Ossur's AFO Leaf Spring is a lightweight but strong ankle-foot orthosis designed to support mild drop foot. The....
  • SUITABLE TO BE WORN WITH MOST SHOE TYPES - The well-designed semi-rigid section for toe clearance provides effective dorsiflexion and support during....
  • FLEXIBLE SOLE FOR CUSTOM FIT - The flexible footplate goes inside the shoe replacing the insoles – it can be trimmed with a pair of scissions and....
  • STRONG DESIGN - Made from flexible prefabricated, injection molded polypropylene, this well-constructed and durable AFO leaf spring is designed with....
  • IMPORTANT SPECIFICATIONS - AFO Leaf Spring is only meant for mild drop foot secondary to neurological conditions. It is not to be used in case of....
Check Stock