Best Leg Mounting Kit

Pegboard Mounting Kit, Includes Screws, Spacers and Washers for 1/8-Inch and 1/4-Inch Pegboard (72 Pieces)

  • Easy to install: these pegboard mounting accessories are easy to install and use, minimal tools needed, just a screwdriver and level (power screwdriver recommended, not included).
  • Suitable for most pegboards: the pegboard mounting and spacer kit can be widely applied to most standard sizes of pegboards, including 1/4 inch and 1/8 inch pegboard (thickness not exceeding 1/4 inch).
  • Reliable to use: the screw and washers are made of steel, sturdy and sustained, not easy to break or deform, the spacer is made of rubber, flexible and serviceable to serve you for long time.
  • Applicable occasions: the pegboard mounting kit required to mount a pegboard to the wall is included in our package, the designed spacers stay on the screws while mounting, which can be applied for mount pegboard on wood stud, hollow and concrete walls.
  • Pegboard mounting kit: package comes with 72 pieces pegboard mounting kits, including 24 pieces screws, 24 pieces washers and 24 pieces spacers, enough quantity to meet your needs and replacements.
Check Stock

ASOPARTS 42437 Headlight Mounting Kit for model GMC, Chevrolet, Oldsmobile, Buick, pontiac, Cadillac-2pcs

  • 【Compatibility】42437 Headlight mounting kit Compatible for 1978-2016 GMC, 1977-2017 Chevrolet , 1978-1994 Oldsmobile, 1978-1985 Buick, 1977-1990 Pontiac, 1999-2000 Cadillac, For specific models, please see the details page below.
  • 【Replacement Part Number】42437, 5966249, 5968095, 5969466, This headlight mounting kit is a direct replacement for the headlight housing and can replace damaged or missing original light covers and hardware.
  • 【Easy to install】This headlight bucket kit is easy to install and ready to install.
  • 【Excellent Material】 - Our headlight bucket Kit is made of High-Quality material, This headlight mounting kit is durable, reliable with high performance and a long service life..
  • 【 Perfect Service】Please check your vehicle's Year, Make and Model before purchase, if you have any questions or dissatisfaction you can contact us at any time..
Check Stock

Kohler 1236365 Toilet Seat Hardware Kit - Bumpers, Mounting Nuts and Bolts

  • Made by Kohler. Part #1236365 Bumper Hardware Kit..
  • Kit includes: 2 toilet seat bumpers, 2 toilet seat mounting bolts, and 2 toilet seat plastic mounting nuts..
  • This hardware kit is compatible with Kohler two piece toilets..
  • The installation of the toilet seat mounting bolts must be followed carefully to ensure it is properly tightened. Please see below for installation instructions..
Check Stock

Neewer Extendable Camera Monopod with Removable Foldable Tripod Support Base:Aluminum Alloy,20-66 inches/52-168 Centimeters for Canon Nikon Sony DSLR Cameras,Payload up to 11 pounds/5 kilograms

  • SOLID CONSTRUCTION: Kit includes a carbon fiber camera monopod and a 3-leg tripod base, durable and solid.
  • Note: Camera is NOT Included.Note: When the camera is mounted on a monopod, you need to hold the monopod with one hand, otherwise it will fall and may cause damage to your camera..
  • EXTENDABLE MONOPOD: The monopod can be extended to 66 inches/168 centimeters, folded to 19.68 inches/50cm.
  • Max load weight is 11 pounds/5 kilograms for optimal performance.
  • SHOOTING AT DIFFERENT ANGLE AND HEIGHT: 15 degree tilt of the tripod support base can help monopod achieve 360 degree panoramic rotation.
  • 5-section leg adjustment system provides flexible shooting at different height.
  • PORTABLE AND EASY-USE: With its light weight, it is easy to carry when travel outdoor.
  • 1/4-inch screw on the mounting plate to install your camera.
  • 3/8-inch screw hole at the bottom allows you to install a mini tripod.
  • COMFORTABLE and ULTR-STABLE: Foam hand grip for comfort holding and stability.
Check Stock

WX4-A019 JXA019k Microwave Mounting Kit Replacement Compatible with GE Optional Undercabinet Metal Microwave Hanging Kit

  • ღ【 Save Space】- WX4-A019 Microwave Under The Cabinet Mounting Kit allows you to mount your microwave under cabinetry, Frees up valuable kitchen....
  • ღ【High Quality】- Optional undercabinet mounting kit is made from durable high-quality Hot-dip galvanized steel material, offer long-lasting use.....
  • ღ【 Easy to Install】- This mounting kit include 3 sets of bolts, 2 in-cabinet mounting straps, 7 templates and 3 sets of 2 rear brackets , and....
  • ღ【Compatible With Models】- JXA019K Metal Microwave Hanging Kit Compatible with GE models JE740BK, JE740WK, JEM25BF, JEM25WF, JEM31BF, JEM31CF,....
  • ღ【Part Replaces】- Part Number WX4-A019 replaces 04A019, 774279, AH311867, EA311867, JXA019K, PS311867, WX04-F0B6-01, WX04-F0N6-01, WX04-F0P6-01,....
Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

  • Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
  • Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
  • Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.
Check Stock

Whitetail Woodcrafters Turkey Beard Display Plaque with Fan Mount- Engraved Camo

  • MOUNT YOUR OWN TROPHY - By mounting your own trophy, you save money and get it up on the wall faster.
  • Hunters Specialties Turkey Tail & Beard Mounting Kit is perfect for any turkey species and will be the best choice for any hunter.
  • EASY TO ASSEMBLE - Turkey Tail & Beard trophy mount kit from Hunters Specialties is very easy to assemble.
  • The kit comes with a mounting plaque, a brass nameplate, and includes all mounting hardware and easy-to-follow instructions.
  • TAIL MOUNTING INSTRUCTIONS - Place the dried turkey tail on the back of the top plaque.
  • Make sure the fan is centered and straight.
  • Next, lay the retaining plate across the base of the tail and secure it in place with the two screws provided.
  • BEARD MOUNTING INSTRUCTIONS - The beard of the turkey mounts in the slot located at the bottom of the plaque.
  • It is held in position with either hot melt glue or a silicone adhesive (not included into package).
  • HUNTERS SPECIALTIES - They say craftsman is only as good as his tools.
  • We believe the same holds true for hunters.
  • That's why we make purpose-driven hunting tools tha....
Check Stock

Bazooka ST10 10 Inch Black Colored Heavy Duty Mounting Strap Kit For Bass Tubes

  • SECURE: Our mounting straps offer a secure mounting solution for our Bazooka Bass Tubes enclosures while making removal easy, too.
  • MOUNTING STRAPS: 10 inch mounting kit for bass tubes.
  • 360 DEGREE SOUND: This mounting kit allows for 360 degrees rotation so your speaker sounds the best at any angle.
  • BEST IN THE BUSINESS: Combined with a fused connection to your battery, the Bazooka ATV-Tubes are the ultimate all-in-one off road audio solutions available.
Check Stock

Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More

  • ✔Heavy Duty Leveling Feet- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • ✔Versatile Threaded Legs- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot..
  • ✔ L-Shaped Mounting Bracket- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • ✔1320LBs Weight Support- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality..
  • ✔Hex Wrench for Easy Adjustment- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench..
Check Stock

Neewer Extendable Camera Carbon Fiber Monopod with Removable Foldable Tripod Support Base: 5-Section Leg, Max. 66 inches for Canon Nikon Sony DSLR Cameras, Payload up to 11 pounds/5 kilograms

  • SOLID CONSTRUCTION: Kit includes a carbon fiber camera monopod and a 3-leg tripod base, durable and solid.
  • Note: Camera is NOT Included.Note: When the camera is mounted on a monopod, you need to hold the monopod with one hand, otherwise it will fall and may cause damage to your camera..
  • EXTENDABLE MONOPOD: The monopod can be extended to 66 inches/168 centimeters, folded to 19.68 inches/50cm.
  • Max load weight is 11 pounds/5 kilograms for optimal performance.
  • SHOOTING AT DIFFERENT ANGLE AND HEIGHT: 15 degree tilt of the tripod support base can help monopod achieve 360 degree panoramic rotation.
  • 5-section leg adjustment system provides flexible shooting at different height.
  • PORTABLE AND EASY-USE: With its light weight, it is easy to carry when travel outdoor.
  • 1/4-inch screw on the mounting plate to install your camera.
  • 3/8-inch screw hole at the bottom allows you to install a mini tripod.
  • COMFORTABLE and ULTR-STABLE: Foam hand grip for comfort holding and stability.
Check Stock