Best Lift Plate

Readylift 69-3490 2019 Silverado/Sierra 1500 4 Inch SST Lift Kit

  • Max Lift: 3.0"F/1.0"R - Max Tire Dia: 35".
  • E-coated finish on the strut extensions, rear blocks and U-bolts will last as long as your Toyota.
  • Skid Plate Spacers provided to adjust the skid plate down when using differential drop brackets.
  • Precision crafted upper strut extensions designed to position the strut in the same mounting angle position.
Check Stock

Cat 3 Ton Big Wheel Off Road Hybrid Jack Vehicle Lift for Trucks SUVs ATVs Offroad Vehicles - 240330

  • Capacity - 3 Ton (6000lbs), and Lift Range - 6 in. - 21.5 in..
  • Adapter included increases the overall max lift height by 7.75 in..
  • Bottom skid plate to keep the jack stable.
  • 7 pumps to max height with dual piston pump.
Check Stock

DANCO Trip Lever Tub and Bath Drain Trim Kit with Overflow Plate, Oil Rubbed Bronze, 1-Pack (10580)

  • BATHTUB DRAIN TRIM KIT: This tub drain kit with included bushing adapter is designed to fit 1-1/2 in. and 1-7/8 in. tub drain shoe sizes.
  • OVERFLOW PLATE REPLACES 2-HOLE OVERVFLOW PLATES: The 2-hole face plate includes pin to attach to the tub drain linkage.
  • simply lift up on the trip lever to close the drain to fill the tub with water and push down on the trip lever to open the drain.
  • DRAIN TUB SHOE DIMENSIONS: Tub Shoe Diameter 1-1/2 in & 16 TPI (Threads per inch).
  • Tub Shoe Bushing Adapter Diameter 1-7/8 in. & 11.5 TPI (Threads per inch).
  • OVERFLOW PLATE DIMENSIONS: Trip lever overflow plate holes are 2-inches in on center and 3 inches across in diameter.
  • drain trim cover exterior is slightly under 3 inches.
  • TUB DRAIN STOPPER: The bathtub strainer catches hair and debris while allows for water to flow freely down the drain.
  • HASSLE-FREE DIY INSTALLATION: Complete tub drain trim kit includes a 2-hole face plate, strainer, overflow plate, bath shoe, threaded adapter and screws.
  • BUILT TO LAST: Brass construction provides strength and durability to withstand the rigors of everyday use.
  • OIL RUBBED BRONZE FINISH: This modern Oil Rubbed Bronze finish will update your existing bathtub trim and complement your bathroom décor.
  • TOOLS NEEDED: Screwdriver, Pliers and Plu....
Check Stock

Entsong Grill Grate Lifter Tool, Hot Plate Bowl Pan & Dish Retriever Gripper Tong Clamp Holder，Grate Grabber Grill Grate Elevator Tool

  • Listing is for 1-pack Big Green Egg accessories plate setter lifter/ pizza stone plate setter tool.
  • Fit for medium large big green egg heat deflector, most Kamado smoker grills, pizza stone and other ceramic/ cast iron heat deflector smokin' stone.
  • Made of high quality powder coated heavy gauge steel, heavy duty and durable.
  • Comfortable Ergonomic anti-scalding handle, lift hot plate setter easily and securely.
Check Stock

ZahyoX Router Lift System Full Installation Set with 9-1/4' x 11-4/5' Aluminum Plate, Insert Ring, Hex Keys

  • A Truly Excellent Router Lift Built with premium quality materials, compatible with most routers with reduce collars(sold separately)..
  • Hard Anodized Flat Top Plate provides you with a dad flat surface for routing and extra durability to wear..
  • Ultra Smooth Rise and Fall Movement, with No Side Play Steel guide posts are housed within double-sealed linear bearings to resist dust infiltration..
  • Bundle Includes: Router lift, 3 insert ring, 1 start pin, crank handle, 2 center positioning pins,4 mounting plates, multiple set screws, 3 allen wrenches..
  • Lifetime Warranty: If the router lift fails due to a material or manufacturing defect the component will be replaced free of charge..
Check Stock

BESTOOL Jack Plates for Outboard Motor 4'' Set Back Adjustable for Boat Steering System, Boat Jack Plat for Outboard Motors

  • BESTOOL jack plate gives you a maximum height of 5.5 inches to lift your long axle engine and make it work on short axle beam boats!.
  • Jack plate Weighs 24 lbs.225 Maximum Horsepower, 4 inches of adjustable vertical movement.Jack plates are the perfect solution for long shaft engines with a short shaft transom..
  • Adjusts easily by turning one steel bolt, offers 4 inches of adjustable vertical movement. Quick installation,easy slip-on. Replace your original damaged or rusted one..
  • Jack plate for outboard is made of high strength polished Aircraft Quality Aluminum.With a convenient one piece design made of aluminum alloy and stainless steel fasteners for maximum corrosion resistance and durable..
  • Outboard Jack Plate adjusts easily by turning one steel bolt, Professional installation is highly recommended..
Check Stock

Sistema Microwave Collection Plate with Removable Steaming Rack Large 44.6 oz./1.3 L Red

  • Microwavable plate designed for heating pre-prepared meals and leftovers.
  • Removable steaming rack ideal for preparing vegetables, fish, and poultry.
  • Steam release vent on lid allows for splatter-free heating.
  • Cool-to-the-touch, easy-lift tabs for easy opening of the plate.
Check Stock

Vestil HPC-40 Horizontal Plate Lifting Clamp, Steel, 1-1/4\ Plate Thickness, 4000 lbs Working Load Limit, 1.2\ Bale Opening

  • Designed for lifting plate material in horizontal position.
  • Heavy-duty steel construction for years of reliable use.
  • Lift only one (1) clean and oil free plate at a time..
Check Stock

INCRA Mast-R-Lift-II Router Lift

  • Exclusive INCRA MagnaLOCK reducing ring system (3/8-Inch, 1-Inch, 1-5/8-Inch, 2-5/8-Inch, 3-5/8-Inch) for instant ring changes and perfect ring fit.
  • Change router bits from the top of the table. Quickly make super precise, 0. 001-Inch height adjustments from above.
  • 9-1/4-Inch x 11-3/4-Inch x 3/8-Inch plate size is compatible with all INCRA Router Tables and fits some other brands.
  • Exclusive ball bearing mechanism for super smooth action and low friction.
  • Patented thread tensioning system eliminates vertical lash in the lift mechanism. Ultra-responsive, direct drive 16TPI lift screw mechanism.
Check Stock

TACO Marine V11-9990BBK60-2 SuproFlex Rub Rail Kit - 60' x 2\ x 29/32\

  • Industry Standard Base Rail Adapter Rail Adapter for 3" Lift Kit.
  • Some newer trucks that have deeper beds need additional height on the hitch plate to clear the fender side walls.
  • PullRite's 3 Lift Kit simply attaches to the SuperRails or Universal Rails in the bed of the truck, and raises the hitch 3 providing more clearance for the truck fender sidewalls.
  • Refer to manufacturer recommendations to ensure proper fit and installation procedure.
Check Stock