Best Lift Type Check Valve

Tektall 2 Pack 10mm 3/8" Aluminum Alloy Non-Return One Way Check Valve for Fuel Line Oil Petrol Diesel,with 4Pcs Universal Adjustable Hose Clamps.

  • 【What is Fuel Non Return One Way Check Valve?】 The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel from returning back to the tank and keeps it in the line.So this one way valve can perfectly solve your vehicle's hard or slow startup issues..
  • 【Good Quality】 Tektall non return check valve is made of high-quality aluminum alloy, the life is longer than plastic oil valve, and this check valve is more durable and corrosion-resistant strong..
  • 【Easy to Replace】 According to the little arrow on the valve, connect the fuel line.Then using the hose clapms and screwdriver to ensure the pipes don't drop off and keep tightly. This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient..
  • 【Wide Applications】 This one-way check valve is installed in many low pressure fuel systems / diesel / Carburetors and bio fuel systems where fuel to only flow one way, suitable for petrol, diesel, water, oil. It universal can be used on any UTV, quad, dirtbike, jetski, waverunner, boat, truck, car, motorcycle, tractor, camper, lawn mower, blower, pressure washer, etc..
  • 【Working parameters】 The minimum upstre....
Check Stock

ABN 8in Valve Spring Compressor, 3-6.5in Capacity, 6in Clearance – Small Overhead OVH Engine Repair Compressing Tool

  • EASY COMPRESSION: The ABN Valve Spring Compressor Small Overhead OVH Engine Repair Compressing Tool allows you to effortlessly disassemble and reassemble valves.
  • For correctly fitting, installing, and removing automotive valve springs.
  • FITS YOUR VEHICLE: Suitable for small to medium engines with overhead valves.
  • Works with a cylinder head on your workbench or any OVH head removed from the block.
  • 3-inch to 6.5-inch (7.6cm to 16.5cm) capacity with a 6-inch (15.2cm) throat clearance.
  • GRIP COMFORTABLY: Molded and cushioned handle that will give you more leverage.
  • Automatic locking and an easy grip handle help you to keep the tool in place and gain slip-free leverage.
  • EASY TO USE: Close the clamp until the fork-type portion of the tool fits snugly on the spring cap and the screw pivot is on the valve face, then screw in the threaded rod to compress the spring.
  • Automatically locks in place and is simple to release, lift, and compress.
  • BUILT TO LAST: Constructed from high-quality metal that eliminates tool flex.
  • Strong and adjustable cam-action works perfectly in line with the valve and can get into even the narrowest valve chambers.
Check Stock

Happybuy Stainless Steel 150ft 25GPM Submersible Deep Well Pump for Industrial and Home Use, (1/2 HP 220V)

  • High-quality Material: The submersible well pump comprises 304 stainless steel and a built-in check valve, rust-proof and corrosion-proof. You can get our durable and sturdy pump for a long time use..
  • Super Large Head & Flow: Powerful flow of the deep well pump can achieve 25 GPM, and the head can reach 164ft. More convenient and efficient to use water. Heavy-duty thermoplastic impellers are designed to provide large flow and high lift..
  • Premium Filtration Mesh: The filtration mesh of a submersible pump is made of stainless steel to filter impurities. You can add a layer of gauze in front of the filtration inlet for a new drilled well if there is excessive granular sediment..
  • Excellent Performance: The submersible water well pump is designed with a built-in check valve, which can be mounted vertically and is suitable for home usage. The hermetically sealed motor is thermally protected to prevent overheating..
  • Various Application: This submersible pump for a deep well is suitable for extraction from the deep wells for groundwater and uses in rivers, reservoirs, canals, and other water lifting works. They are primarily used in farmland, factories, railways, and mines..
Check Stock

Comp Cams 12-238-2 Xtreme Energy 218/224 Hydraulic Flat Cam for Chevrolet Small Block

  • Excellent response, good mid-range, noticeable idle..
  • 218/224 Duration at .050". 110 Degree Lobe Separation Angle.
  • Excellent performance in street carbureted applications..
  • More vacuum allows an increase in duration for improved performance and assists power brakes..
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
  • Best performance with aftermarket intake manifolds, headers and lower gear ratios..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

2 PCS Intake & Exhaust Camshaft Position Actuator Solenoid Control Valve 12655420 12655421 917-215 917-216 for GM Chevy Cobalt Malibu G5 G6 HHR Buick Pontiac 2.0L 2.2L 2.4L

  • ...e/exhaust camshaft in an advance or delayed position, the valve can be opened and closed in advance. Combustion will be more fully, exhaust will be more thorough.So as to achieve the role of fuel saving, the engine can work better..
  • Replace -when these situations occur, you need to replace the timing solenoid valve: check that the engine indicator light is on, the engine oil is dirty, the engine idling is unstable, and the fuel efficiency is reduced.If the VVT is not working properly, your engine will perform noticeably worse..
Check Stock

Left & Right 917-211 917-214 Oil Control VVT Valve Variable Timing Solenoid Compatible with Avalon Sienna Highlander ES300 ES330 RX300 RX330 RX400H 3.0 3.0L 15330-20010 15340-20010

  • ...e/exhaust camshaft in an advance or delayed position, the valve can be opened and closed in advance. Combustion will be more fully, exhaust will be more thorough.So as to achieve the role of fuel saving, the engine can work better..
  • Replace -when these situations occur, you need to replace the timing solenoid valve: check that the engine indicator light is on, the engine oil is dirty, the engine idling is unstable, and the fuel efficiency is reduced.If the VVT is not working properly, your engine will perform noticeably worse..
Check Stock

APDTY 027046 Variable Valve Timing Intake Solenoid 12627117, 12655434, 12662736

  • Better Than OE - Provides 4% higher seat pressure and 0.030" higher valve lift capacity than GM Blue LS6 springs..
  • High Quality - Manufactured with small batch, premium wire for maximum quality and durability..
  • Cam Swap Ready - Designed for use with popular GM performance camshafts and COMP Cams NSR series camshafts..
Check Stock

SÜA - Propane Regulator Welding Gas Gauges - CGA-510 - Rear Connector - LDB series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses.

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

SÜA - Propane Regulator Welding Gas Gauges - CGA-510 - Rear Connector - LDP series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses.

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

SÜA - Oxygen and Acetylene Regulators Welding Gas Gauges Pair - Rear Entry - LDB series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • **READ THIS**: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock