Best Lightweight Core Drill

TOMMARS Diamond Drill Bits Set 5 Piece Diamond Hole Saw for Tile Ceramic Marble Granite Ceramic Porcelain 1/4, 5/16, 3/8, 1/2 inch

  • Tech information: Diameter 1/4 inch(6mm), 5/16inch (8mm), 3/8inch (10mm) & 1/2 inch (12mm).
  • The tile drill bit set is equipped with a 1/4 inch hexagonal shank and is therefore compatible with all common drills & cordless screwdrivers..
  • Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface. This allows for longer drilling without much wear on larger projects..
  • Diamond core drill bit developed to drill in extremely hard materials such as tile, ceramic, marble, granite, ceramic, porcelain, etc..
  • Attention: Begin drilling approximately at a 45° ( between the hole saw and the working surface ) angle and only moderate pressure is good for the service life of the dry core bit..
Check Stock

100TECH Core Drill Bit Arbor Adapter for Threaded Diamond Hole Saw 3/8 Round Shank with Triple D Cut 5/8 -11 Drill Adapter

  • 1) 5/8"-11 Thread to Connect The Diamond Drill Bit..
  • 2) 3/8" Round Shank with Triple D Cut to Connect the Core Drill Chuck. The Triple D Cut design Assures no Shank Slippage During Use..
  • 3) [Update Version]We received Feedback From Customers Who Said that Old Adapter is Easy to Bend or Twist . We Have Added Heat Treatment....
  • 4) [Note] The Outer Diameter of The Core Drill Bit Should be Less Than 2 1/2". Otherwise It will Bent or Broke..
  • 5)[Surface treatment] Black Oxide Finish.
Check Stock

8" Wet Drill Core Bits for Concrete and Hard Masonry, 10mm Segment Height, 14" Drilling Depth, 1-1/4"-7 Arbor, Wet Only

  • MULTIPURPOSE - designed to drill concrete, concrete with light steel reinforcement or hard masonry.
  • HEAVY DUTY - embedded diamond concentration guarantees longer core life and efficient drilling.
  • WET/ROTARY MODE ONLY - recommended to use with handheld core drills or dedicated core drill rigs (rotary mode only, no wire mesh drilling).
Check Stock

2 1/4\ Diamond Hole Saw for Shower Diverter Valve 2 1/4\ Waste Pipe Hole Saw Guide Holds in Place Large Diamond Particle Professional Diamond Hole Saw for Porcelain Tile Ceramic Tile Glass Tile 57mm

  • 2 1/4" Diamond Hole Saw 57mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

1 Inch Diamond Core Drill Bit for Porcelain Tile Ceramic Marble Granite Drilling,BRSCHNITT 1pc Vacuum Brazed Diamond Hole Saw with 5/8-11 Thread (25mm)

  • ✔Size --1pc 1"(25mm), diamond height 10mm, total length 60mm, 5/8-11 thread of the tile drill bit.
  • ✔Wide Application --Diamond core bits are worked great for dry drilling holes through porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime.
  • ✔Super Quality Raw Material --Using vacuum brazed technology ,which increases resistance to temperature and friction,to make the diamond particles better attach to the core steel,imporve the performance and lifetime.Constructed with high grade diamond grit for effortless cutting and improved durability in tough applications.High-quality core steel body helps to be more efficient and durable, not easy to deform.
  • ✔Fast And Smooth Drilling --Special U-groove tooth shape and chip removal design of the tile hole cutter creates a high sharpness, you could drill smoothly with no broken edges.
  • ✔Machine --angle grinder (direct connection) or electric drill (with adapter ).
Check Stock

1 1/8\ Diamond Hole Saw For Faucet Sink Hole Guide Holds Holesaw In Place When Drilling, High Quality Multi Use Diamond Grit Hole Saw For Porcelain Granite Ceramic Glass Tile Glass Bottles Blocks 29mm

  • 1 1/8" Diamond Hole Saw 29mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

SHDIATOOL Core Drill Bit Adapter 5/8 -11 Thread Male to SDS Plus Shank

  • 1pc Adapter for 5/8-11 to SDS Plus Shank for diamond core bit.
  • 5/8-11 male thread, Total length 72MM, shank length 45MM，pitch : 2.309mm..
  • 5/8-11 UNC thread core bits can be fitted on Hammer drill or electric drill with SDS arbor.
  • We provide 100% refunding or replacement if there are any quality problems.
Check Stock

SKIL 20V 1/2 Inch Hammer Drill, Includes 2.0Ah PWRCore 20 Lithium Battery and Charger - HD527802

  • 2-Tool drill Combo KIT—Drill set includes Brushless 20V 1/2 inch heavy duty hammer drill driver and 20V 1/4 inch hex Impact driver. Plus a PWR core 20 2. 0Ah Lithium battery and PWR jump charger..
  • DIGITAL BRUSHLESS MOTOR—Provides efficient and high-performance power for drilling through tough materials and masonry..
  • Longer run time & battery LIFE—Industry leading PWR core 20 Lithium battery technology wraps Each cell with cooling material to keep the battery powering on for 25% longer run time and 2x battery life..
  • Power on the GO—Plug in To the battery’s USB port wherever, whenever with PWR assist mobile charging..
  • CHARGES IN 5 MINUTES—Automatic PWR Jump charges the battery in just 5 minutes, or 100% battery in 30 minutes..
Check Stock

DeVoNe Dusty Diamond's All-Star Softball 72 Pins 8 Bit Game Cartridge (Gray)

  • 1pc Adapter for 5/8-11 to SDS Plus Shank for diamond core bit.
  • 5/8-11 male thread, Total length 72MM, shank length 45MM.
  • 5/8-11 UNC thread core bits can be fitted on Hammer drill or electric drill with SDS arbor.
  • We provide 100% refunding or replacement if there are any quality problems.
Check Stock

Diamond Core Drill Bit Set - BRSCHNITT Diamond Hole Saw Kit for Drilling Porcelain Tile Ceramic Marble Granite,6pcs Diamond Drill Bits with 5/8-11 Thread 4/5" 1" 1-1/4" 2" 3" 4"（20 25 35 50 75 100mm）

  • ✔Size --Diamond drill bit 4/5" 1" 1-1/4" 2" 3" 4"（20 25 35 50 75 100mm),each size 1pc,diamond height 10mm, total length 60mm, 5/8-11 thread of the tile drill bit..
  • ✔Wide Application of drill bit --Worked great for porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime..
  • ✔Super Quality Raw Material --Using vacuum brazed technology,makes the diamond particles better attach to the core steel, imporve the performance and lifetime.High-quality core steel body helps to be more efficient and durable, not easy to deform.
  • ✔Fast and Smooth Drilling --Special U-groove tooth shape and chip removal design of the tile hole cutter creates a high sharpness, you could drill smoothly with no broken edges.
  • ✔Easy to work:can be fixed on Angle Grinder of 5/8-11 thread firmly and drill various commonly used holes for building/remodeling a bathroom or kitchen,Convenient to organize these diamond tip drill bits into this Box.
Check Stock