Best Lightweight Tubing

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon t....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock

ATP PE18ANA Value-Tube LDPE Plastic Tubing, Natural, ID x 1/8\ OD, 100 feet Length

  • Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements.
  • Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing.
  • It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure.
  • Linear low density polyethylene tubing, lightweight and flexible.
Check Stock

Quickun Pure Silicone Tubing, 1/4\ ID x 3/8\ OD High Temp Food Grade Tube Pure Silicone Hose Tube for Home Brewing, Beer Line, Kegerator, Wine Making, Aquaponics, Air Hose by Proper Pour ( 3.28 Ft )

  • 1/4" ID x 3/8" OD pre-cut flexible silicone tubing. High quality, flexible silicone compound in compliance with FDA and 3A Sanitary Standards..
  • Flexible tubing for air, water, food, and beverage - durometer: 50A.
  • 【Good Performance】Lightweight, flexible, and crystal-clear, tubing provides excellent resistance to chemicals, solvents, alkalis, and acids. Smooth inner surface for easy flow and easy cleaning. BPA Free and non-toxic..
  • 【Industrial Application】This extremely flexible, food grade silicone is suited for general low pressure industrial applications for the conveyance of chemicals, liquids, gases, and solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines..
  • 【More Application】Its many suitable uses include pumps, shiphons, filters, AC and HVAC tubing, drain valve connections, filters, plumbing, drip irrigation, ponds and gardens, beer brewing, wine making, and more. Great for fluid handling, peristaltic pumps, siphoning, draining, aquaponics and water/oil change, etc. Because of its versatility and the ability to be used in a wide range of applications, it is a great value for your money..
Check Stock

Quickun Pure Silicone Tubing, 3/16' ID x 5/16' OD High Temp Food Grade Tube Pure Silicone Hose Tube for Home Brewing, Beer Line, Kegerator, Wine Making, Aquaponics, Air Hose by Proper Pour ( 3.28 Ft )

  • 3/16" ID x 5/16" OD pre-cut flexible silicone tubing. High quality, flexible silicone compound in compliance with FDA and 3A Sanitary Standards..
  • Flexible tubing for air, water, food, and beverage - durometer: 50A.
  • 【Good Performance】Lightweight, flexible, and crystal-clear, tubing provides excellent resistance to chemicals, solvents, alkalis, and acids. Smooth inner surface for easy flow and easy cleaning. BPA Free and non-toxic..
  • 【Industrial Application】This extremely flexible, food grade silicone is suited for general low pressure industrial applications for the conveyance of chemicals, liquids, gases, and solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines..
  • 【More Application】Its many suitable uses include pumps, shiphons, filters, AC and HVAC tubing, drain valve connections, filters, plumbing, drip irrigation, ponds and gardens, beer brewing, wine making, and more. Great for fluid handling, peristaltic pumps, siphoning, draining, aquaponics and water/oil change, etc. Because of its versatility and the ability to be used in a wide range of applications, it is a great value for your money..
Check Stock

(Stethoscope Binaural) Replacement Tube by Reliance Medical Compatible with Littmann® Classic II SE, 2 SE, Stethoscope - Regular Black TUBING

  • Tubing: latex free, single lumen. Please note: Your original tubing shape should resemble the item image. Otherwise, it will not fit your bell..
  • Ear tubes: Stainless Steel / Interchangeable with original Littmann soft sealing eartips.
  • Y position to diaphragm - about 21 inch..
  • fits All Littmann Classic models, Select, Lightweight, Pediatric, and Infant.
Check Stock

Quickun Pure Silicone Tubing, 3mm ID x 5mm OD High Temp Food Grade Tube Pure Silicone Hose Tube for Home Brewing, Beer Line, Kegerator, Wine Making, Aquaponics, Air Hose by Proper Pour (16.4 Ft)

  • 3mm ID x 5mm OD pre-cut flexible silicone tubing. High quality, flexible silicone compound in compliance with FDA and 3A Sanitary Standards..
  • Flexible tubing for air, water, food, and beverage - durometer: 50A.
  • 【Good Performance】Lightweight, flexible, and crystal-clear, tubing provides excellent resistance to chemicals, solvents, alkalis, and acids. Smooth inner surface for easy flow and easy cleaning. BPA Free and non-toxic..
  • 【Industrial Application】This extremely flexible, food grade silicone is suited for general low pressure industrial applications for the conveyance of chemicals, liquids, gases, and solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines..
  • 【More Application】Its many suitable uses include pumps, shiphons, filters, AC and HVAC tubing, drain valve connections, filters, plumbing, drip irrigation, ponds and gardens, beer brewing, wine making, and more. Great for fluid handling, peristaltic pumps, siphoning, draining, aquaponics and water/oil change, etc. Because of its versatility and the ability to be used in a wide range of applications, it is a great value for your money..
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock