Best Linear Motor Driver

Makita XPT02Z 18V LXT Hybrid Brushless Impact Driver

  • Hybrid 4-function tool with impact, hammer, driver and drill all in one.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Hammer Driver-Drill mode features variable 2-speed operation (0-700 & 0-2, 700 RPM) (0-8, 400 & 0-32, 400 BPM).
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

Makita XT269T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Panasonic Premium ES-RF31 Wet and Dry Four-Blade Men's Shaver

  • Ultra sharp men's shaver blades: Panasonic arc4 men's electric shaver.
  • 4 precision honed 30° nanotech blades and arc foil follow facial contours for a quick, close and comfortable shave.
  • Wet/dry electric shaver and trimmer pop up trimmer details mustaches, beards and sideburns.
  • Wet dry waterproof shaver can be used for a quick dry shave any time, or over the sink or in the shower.
  • Flexible pivoting head conforms naturally to the face, chin, neck and jaw.
  • Shaving sensor monitors differences in beard densities to instantly adjust cutting power for smooth, even shaving.
  • High performance linear motor drive: Panasonic arc4 shaver is equipped with a linear motor to deliver 13,000 cuts per minute and maintains peak power up to the end of every battery charge.
  • Blue illuminated LCD: Quick read display shows shave timer, battery indicator, cleaning reminder, sonic vibration cleaning mode, blade/foil replacement reminder and battery charge indicator.
  • Adequate ambient temperature for charging is 15 - 35 °c.
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

Mini Electric Linear Actuator 20N(4.5lbs) 1 Inch High Speed 15mm/s (0.6\/sec) Mini Linear Actuator Motor DC12V –Weight 0.1KG

  • The Remote Control(not included) which enables the linear actuator moving forward --stop-- backward，clockwise--stop--counterclockwise..
  • Stroke length = 1 inche(25mm), Travel Speed: 0.6 inches/sec (15 mm/s),Weight:0.1KG,Small and Light..
  • Feel Stop: Stop at Any Position,With Automatic Machine Lock, It will Automatically Stop When It Reaches the Top..
  • Safe and Worry-Free: Overcurrent Protection, Short Circuit Protection, Overload Protection, Overvoltage Protection..
  • Our Linear Actuator with Linear Reciprocating Motor and Durable Stroke Ideal for Intelligent Range Hood, Fan Blades, Cabinets, Window Opener, Robotics, Home Automation.
Check Stock

Panasonic Arc4 Electric Razor, Men's 4-Blade Cordless with Wet/Dry Convenience, ES-RF31-S

  • 5-Blade Shaving System for a Close Shave: The Panasonic five blade foil shaver uses micro-thin outer foils and ultra-sharp inner blades to capture and lift whiskers, cutting cleanly at the base.
  • Efficient, Hyper-Performance Linear Motor: Ultra-fast linear motor powers 70,000 cross-cutting actions per minute to drive mens shaver blades through thick, dense hair with ease.
  • Shave Sensor and Multi-Flex Shaver Head: Intelligent sensor detects beard density and adjusts motor speed while a shaver head pivots in various directions to follow contours of the neck, chin and jaw for maximum comfort.
  • Compatible with Panasonic ARC5 shavers: ES-LV97-K, ES-LV67-K, ES-LV95-S, ES-LV65-S.
  • Replace Outer Foil for an Optimal Shaving Performance: Over time, the foil on your Panasonic shaver can wear too thin and cutting parts will become dulled. Replacing the outer foil once every year will ensure a smooth, comfortable shave every time..
  • Unique Outer Foil System for an Efficient Shave: Micro-thin ARC5 foils feature unique shaving elements that work in tandem to cut through millions of hairs with ease.
  • foil system is designed with micro-thin, arched hypoallergenic stainless steel to prevent skin irritation and maximize comfort.
Check Stock

Makita XT269M 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 4.0Ah Blue

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 and 0-2,000 RPM) with BL Brushless Motor delivers 530 in.lbs. of Max Torque.
  • Variable speed Impact Driver (0-3,400 RPM and 0-3,600 IPM) with BL Brushless Motor delivers 1,500 in.lbs. of Max Torque.
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock