Best Lipo Laser Machine

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

5 Pack Lipo Foam Pads for Post Surgery Ab Board Liposuction Surgery Flattening Abdominal Compression Garments Lipo Foam Sheets 8' x 11'

  • LIPOSUCTION FOAM PADS - For best recovery for anyone who has undergone liposuction and abdominal surgeries such as tummy tucks and C-sections.Ideal for arms, chins, abdomen, thighs or any area where uniform healing is necessary. Size 8'' x 11'' x 0.5''.
  • LIPO FOAM & BOARDS - Liposuction Foam Pads, Have a more comfortable healing process, minimizing the pain and distress. Post Surgery Foam Sheets Surgical Compression..
  • SUPER SOFT & EASILY CURVED: Our post surgery lipo foam is made of medical-grade polyurethane post lipo foam, which is super soft and easily curved to fit you perfectly, help to create a soft barrier between compression garments and sensitive skin..
  • GOOD CHOICE: This post surgery foam exerts the pressure necessary to avoid formation of fibrosis or bruising after abdominal plastic surgery, ideal for C-Sections, Liposuction, Post Op and Tummy Tuck. One of the best KUSMOO ab board post surgery liposuction,foam boards for lipo recovery,lipo foams and boards,tabla abdominal board post surgery,post surgery abdominal board, lipo foam,ab board,lipo foams board..
  • THE IDEAL COMPLEMENT FOR YOU: These Surgery Ab Boards are used after a cellulite reduction, tummy tuck, hip surgery, abdominoplasty, knee surgery, panniculectomy, liposuction....
Check Stock

HTRC LiPo Battery Charger Duo Mini RC Balance Charger Dual Port 20Wx2 2Ax2 H4AC for 2-4s LiPo Charging

  • ①Dual Battery Charger--The HTRC H4AC LiPo Charger has two charging channels, it can charge 2 LiPo batteries at the same time. Our charger's shell is....
  • ②Balance Charger--This is a balance charger, please connect the balance port. Easy to operate. Perfect for your 2-4S(7.4V-14.8V) lipo battery..
  • ③Parameter--Our H4AC lipo charger's AC input voltage is 100-240V, it can be used all over the world. It has two independent output port, each port's....
  • ④Features--The lipo charger is compact and light, small and portable, its size is about: 3.54*3.54*1.57inch. And it's easy heat dissipation, built....
  • ⑤What You can Get--One HTRC H4AC LiPo charger, an AC cable, two XT60 cables, a manual and a color box..
Check Stock

SCULPFUN S6 Pro Laser Engraver, 60W Laser Engraving Cutting Machine, 5.5-6W Optical Power Laser Cutter for Metal and Wood, Logo Carving Marking Machine, Gifts for Him (S6 Pro Engraver)

  • ... of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, Li....
Check Stock

Zeee 3S Lipo Battery 6200mAh 11.1V 100C Hard Case RC Battery with Deans T Connector for 1/8 1/10 Scale Vehicles RC Car Tank Trucks Boats 2 Pack

  • 【Zeee Lipo Specification】- Battery Voltage: 11.1V.
  • 【3S Lipo Battery Dimension】- Zeee 6200mAh 3S lipo dimension: 138*46*36mm/5.43*1.81*1.42inch(L*W*H).
  • 【6200mAh Battery Application】 - Zeee 3S 6200mAh Lipo battery compatible with 1/8 and 1/10 rc car, Losi, Slash, HPI Strada XB 1/10 RTR Electric....
  • 【High Performance】- Zeee 6200mAh 3S lipo battery with 100C discharge rate hardcase offers you very high power and very long run time for your RC....
  • 【What You Get】- 2 Pack of Zeee 11.1V 100C 6200mAh lipo battery hard case with Deans T connector. Any product problems, please Contact US: 1. Enter....
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient..
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm....
Check Stock

Traxxas 14.8V 5000mAh 4-Cell LiPo Battery Long

  • Traxxas 2889X - Power Cell 4S 14.8V LiPo Battery, 25C 5000mAh, iD Connector.
  • Features: Engineered Specifically to Fit Traxxas Models High Current Connector with Gold-Plated Copper Terminals and Integrated LiPo Balance Charging....
  • Specs: Type: LiPo Total Capacity: 5000mAh Voltage: 14.8V C Rating: 25 Length: 155 mm Height: 34 mm Width: 45 mm Weight: 16.8 oz.
  • Part number(s) included (in factory packaging): 2889X.
Check Stock

Traxxas 2994 Battery Charger Completer Set: 2849X Battery (1)/ 2970 Charger

  • Traxxas 2994 - Power Cell 3S 11.1V Lipo Battery / iD Charger Completer Pack,.
  • Features: Battery: 4000mA 11.1v 3-Cell ID Charger: Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy sup.
  • Includes: (1) iD Charger #2970 (1) 4000mAh 11.1v 3-Cell 25C Lipo Battery #2849X.
  • Specs: iD Charger Specs: AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (40W Max.) Discharge Current Range: 500mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 365g Dimensions: 146 x 123 x 53mm.
  • Part number(s) included (in factory packaging): 2994.
Check Stock

Turnigy Quad 4x6S Lithium Polymer Charger 400W DC Only

  • T-Power - Made with the Brand-new Input Voltage Range: AC 100V - 240V / OUTPUT : 12V 12AMP ( DC 11.0~18.0V 10A compatible ) item come w/ barrel connector and xt60 connector ).
  • Compatible Model: Turnigy Accucel-6 80W 10A Balancer Charger LiPo LiFe NiMh NiCd JST-XH.
  • Hitec HRC44177 , RCD 44177 X1 Touch 55W AC/DC Multi-Chemistry Touch Screen Battery Charger / Replacement for SKYRC D100 employs LiFe LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger.
  • Ultra Power UP120AC Duo LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger / HOBBYMATE Duo Lipo Charger Dual Charge Port, Fast Lipo Charger, AC/DC Balance Charger 12A 120-240W.
  • T-Power - manufactured with the highest quality materials and include multiple smart features safeguarding against IV - incorrect voltage, SC - short circuit, IO - internal overheating. CE/FCC/RoHS certified.
Check Stock