Best Lm259dc Dc Voltage Regulator

DC Voltage Regulator Buck Converter DC 12V 24V Step-Down to 5V 20A 100W Reducer stabilized Power Supply Converter Waterproof Module Transformer

  • Convert unstable 9V-36V DC power supply into stable 5V 20A DC power output.
  • Input voltage: 12/24V (9V-36V), output: 5V/20A.
  • Over-voltage, over current, over temperature, short circuit auto protection, and can return to normal conditions in the work.
  • Essential for car audio system or other 5V car products (particularly useful in vehicles with 24V power supply).
  • This Voltage regulator widely used in automotive, surveillance systems, railway signals, medical equipment, instruments and meters, LED products, LED strips, cable TV and other low power test systems.
Check Stock

HQRP High Power Upgrade Bulb 3W LED 180LM Compatible with 12 14.4 18 Volt Hitachi Ryobi Skil Makita Craftsman Bosch Porter Cable Dewalt Milwaukee Ridgid Flashlight

  • 200 days warranty! Compatible with Milwaukee 49-24-0155 49-24-0165 Flashlight.
  • DeWALT DC509 36V Cordless Li-Ion Floodlight, DC519 28V Heavy Duty Flashlight.
  • Craftsman 973638-001 fits 315271400 3/8" Cordless Drill Driver, 27153 Flashlight, 315217530 Work Light.
Check Stock

Hantek DSO5102P USB Storage Oscilloscope Oszilloskope 2 Channels 100MHz 1GSa/s

  • ...h sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency. You will receive ET828 or LM2020, they are same product, have same function, LM2020 is our updated name..
  • ▼MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50Ω. Transistor amplification test to meet all test requirements..
  • ▼MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the "F4" button and then rotate the rotary knob to turn on the instrument..
  • ▼LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240x320 color screen with LED backlighting. More clear and suitable for working at night..
  • ▼OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of ....
Check Stock

Pro Chaser DC-DC 72V 60V 48V Volt Voltage to 12V Step Down Voltage Reducer Regulator 180W 15A for Scooters & Bicycles Golf cart 25A 300W

  • DC-DC 72V 60V 48V volt voltage to 12V Step Down Voltage Reducer regulator 300W 25A for Scooters & Bicycles Golf cart.
  • Max working current 25 amp. Made of Aluminum Alloy, laser print on the surface.
  • Important wiring instruction: the lock wire (thin red wire) is to be connected to the lock switch. If you don't have a lock switch, merge the two red....
  • Internal shot circuit protection, over-voltage protection, thermal-load protection.
  • Converts voltage for scooters, bicycles, vacuum lamp, electric snail horn, golf carts, forklifts, buses.
Check Stock

AUTOGINE H3 LED Fog Light Bulbs, 2000 Lumens Extremely Bright 3030-SMD H3 LED Bulbs with Projector for Auto Motorcycle Cars Trucks SUV Fog DRL Lights(6000K Xenon White)

  • Specification: 360 ° H3 automobile fog lamp 20 per fog lamp × 5W LED 360-degree beam angle, no shadow area, high brightness 1000LM, low power consumption DC 9V-30V wide voltage range.
  • Product advantages: lens design, which can emit more concentrated and distant light, 10 lamp beads emitting light from multiple angles, making the car omnidirectional lighting, 1:1 design, integrated design, more compact and more durable.
  • Easy to install: Plug and play, long service life, durable and practical, applicable to automobile fog lamp, headlamp and daytime running lamp.
  • Brightness: 1000LM LED quantity: 20PCS Light color: white Power: 100W Input: 720+- 30mA Voltage: DC 12V-28V Luminous angle: 360 degrees Net weight: 30g.
  • Package includes: 2 PCS H3 Headlamp Bulbs.
Check Stock

Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers (1PCS)

  • The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  • It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect..
  • The motor speed controller can easily provide a continuous current to your DC motor or other DC load..
  • Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller..
  • Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram".
  • Turn on the power, and adjust the potentiometer..
Check Stock

Marker (Radio Vrs. With Melody)

  • ... consumption & lasts up to 50k hours. Multi light applications: interior light, dome light, map light, tail box light, side marker light, back up light, parking light, door light, turn signal light, tail light, license plate light, etc..
  • ⭐Common use for car, truck, motorcycle, scooter, trailer, RV, boat.with DC12V voltage. Fitment: Replacement LED bulb for: W5W 194 147 152 158 159 161 168 184 192 193 259 280 285 447 464 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825 921 906 579 and others..
  • ⭐The distance between the RF remote control with bulbs can reaches 12-30 meters.?No need pointing the RF remote control to bulbs and control all bulbs in within control.?Can control bulbs in the vehicle..
  • ⭐LED Chips Type: 3535 SMD, Chips QTY: 4 pcs/Bulb, Color: RGB 13colors, Voltage: DC 12V, Wattage: 6W/Pair, 3W/Bulb, Output: 0.25A/Bulb, Size: 1.5inx 0.43inx 0.45in (38mmx 11mmx 9mm), Lifetime: More than 30000 hours, Package: 4 pcs bulbs & 2 pcs RF remote.
Check Stock

7-80V PWM DC Motor Speed Controller Switch 30A,Motor Speed Control Regulator

  • 1️⃣ 7-80V PWM DC Motor Speed Controller Switch 30A,Motor Speed Control Regulator.
  • 2️⃣ Wide voltage 7-80V high current 30A Design Wide range of applications, on-board switch with operation Stop brake function, adjustable potentiometer soft cable can be separated Line length 30CM..
  • 3️⃣Circuit optimization design Wide range of duty cycle adjustment, smooth motor without vibration, no vibration, with power indication, stable circuit design for long working hours..
  • 4️⃣Adopt imported high-voltage MOS tube, three high-voltage 100V high-frequency resistance capacitors, and fuses for braking. The parameters are not easy to heat and easy to replace. The standard aluminum housing protects the internal circuits and components for long-term durability..
  • 5️⃣Package Contents:1 x 7-80V PWM DC Motor Speed Controller Switch 30A.
  • Amazon satisfied customer service & fast ship..
Check Stock

AOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR

  • ★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
  • ★Equipped with high-current relay, AC250V 10A.
  • ★The control signal voltage range: the trigger signal is low 0-2V.
  • ★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
  • ★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.
Check Stock

Switch up feat 3irty [Explicit]

  • The stepless speed regulator output voltage range smoothly changes between 3V-8V, so the fan wind speed can be adjusted, comfort greatly increased!....
  • Turn the knob clockwise to increase the air volume. Turning it counterclockwise will make the air volume gentler and the knob has a switch....
  • Usage: very simple! Insert the governor into the mobile phone charger or charging treasure, then insert the fan USB plug into the USB port of the....
  • Input Power Supply Range: DC 4V to 12V ( USB port). Output range: DC 3V-8V (Not fit for 12V USB fan)..
  • Rated power: 5W (Do not overload.)【Please check the second image on the left that is the use connection instructions.】.
Check Stock