Best Lmk Linear Bearing Series

GUWANJI 2Pcs SBR16-2000mm Linear Rail Guide + 4Pcs SBR16UU Square Type Slide Bearing Block, 16mm Linear Rail Overall Length 78.7 inch/2000mm for Fully Supported Linear Rail

  • 2 pieces of linear rail SBR16-2000mm/78.7 inch long and 4 SBR16UU blocks, sliding blocks to be used cooperatively with rails, high precision and easy to mount dismount..
  • Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized processing, ideal for positioning the guide rail..
  • Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with high precision linear bearing inside..
  • SBR16 linear rails apply for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock

Iverntech MGN12 400mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail Guide Material: bearing steel. Rail Guide Length: 400mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Sinoblu 10pcs LM3UU 3mm Bore Linear Motion Ball Bearing 7mm Outer Diameter 10mm Length for CNC Machine 3D Printer

  • [SIZE] - Model: LM8UU, 8x15x24mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

Usongshine MGN9C Linear Rail Bearing Sliding Block Match use with MGN9 Linear Guide for CNC xyz DIY Engraving Machine (200mm, C-Type)

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail guide material: bearing steel. Rail guide length: 300mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

uxcell LM8UU Linear Ball Bearings 8mmx15mmx24mm Carbon Steel for CNC Machine 3D Printer 10pcs

  • Quantity & Size - These linear motion bearings have a total of 10 bearings for different projects, size about 12 x 20 x 30mm: 12mm inner diameter, 20mm outer diameter, 30mm height.
  • LM12UU Bearings - Linear motion ball bearing is made of high quality bearing steel for low noise and long service life.
  • Excellent Rotating Accuracy - Prevent tilt friction between the roller of roller.
  • Double sealed to avoid contaminants entering and save lubricant.
  • Smooth Running - Moment of inertia is low, low starting torque, easy to control the angle degree, runs smooth on rods.
  • These ball bearings are great for small hobby 12mm shaft or rod projects.
  • Widely Used - LM12uu linear bearing is widely used in automation equipment / Electronics / Instrument / Robot / Food machinery / Packaging machinery / CNC machinery.
Check Stock

12 Pcs LM8UU Linear Ball Bearings, 8mm Bore Dia, 15mm OD, 24mm Length with Double Side Rubber Seal Great for CNC,3D Printer

  • [SIZE] - Model: LM10UU, 10x19x29mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 373N, Dynamic Load Capacity (Cr): 549N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

LM12UU Bearing, 10 Pcs 12mm Linear Motion Ball Bearings Bushing Slide Bearing Rods for 3D Printer Cylinder CNC Parts, Pack of 10, 12 x 20 x 30mm

  • [SIZE] - Model: SCV16UU, 50 x 24 x 38.5mm Metric Double Seal Linear Bearing, 16mm Nominal Shaft Diameter.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • Aluminium alloy housing to provide high strength and stiffness..
  • [CAPABILITY] - Static Load Capacity (Cor): 1180N, Dynamic Load Capacity (Cr): 774N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

Framed Impact 20 BMX Bike Mens Sz 20in Army Green 2022

  • Capable of high-end performance – a bike designed for riders with intermediate skills all the way up to Pro – the Mongoose Title Elite 24 BMX race bike is a level above our popular Title series. Suggested rider height is 5’7" and over.
  • Professional-grade 6061 Tectonic T1 biaxial hydroformed and butted aluminum frame with 86mm BB shell, 3D forged 10mm dropouts and internal cable routing. 21.77” top tube length and frame weight of 3.44 lbs.
  • The Title Elite’s drivetrain features 175mm 2-piece 24mm hollow spindle alloy cranks with a 42T aluminum chainring and BB86 press-fit sealed bottom bracket.
  • The wheelset features Arisun XLR8 24” tires mounted on Xposure Infinity XD aluminum double wall rims with 10mm hollow axle sealed front hub and 18T cog sealed bearing cassette rear hub.
  • Aluminum linear pull brake and Radius aluminum brake levers offer precision speed control, while the 6.5" 4130 chromoly handlebar and fork are joined by a 50mm stem and sealed bearing headset to combine for maximum steering performance.
Check Stock

GUWANJI SBR20-200mm to SBR20-2200mm Linear Rail with SBR20UU Slide Blocks CNC Parts Linear Rails for Automated Machines, DIY Projects(SBR20-2200)

  • 2 pieces of linear rail SBR20-2200mm/86.6 inch long and 4 SBR20UU blocks, sliding blocks to be used cooperatively with rails, high precision and easy to mount dismount..
  • SBR20 linear rails are made of good bearing steel and aluminum alloy, surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
  • Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized processing, ideal for positioning the guide rail..
  • SBR20 linear rails apply for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock

Aopin LM25UU Cylinder Linear Motion Ball Bearing, ID 25mm, OD 40mm Linear Ball Bearings Sae52100 Carbon Steel, 6 Rows of Steel Balls, Great for CNC, 3D Printer, Linear Rail Guide 2 PCS

  • [SIZE] - Model: LM6UU, 6x12x19mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 206N, Dynamic Load Capacity (Cr): 265N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock