Best Load Sense Relay Valve

Inkbird PID Temperature Controller Kit High Voltage 100ACV to 240ACV Comes with SSR 40DA Solid State Relay K Type Thermocouple and White Heat Sink

  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer..
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller.
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included.
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time.
Check Stock

MYPIN® Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy 0.2%

  • √ ● Dual display for Fahrenheit(F) and Celsius(C),Range: -1999 to 9999 (depends on the input signal).
  • √ ● Input: Thermo Resistor: PT100, Cu50,Thermocouple: K,Wre3 ~ Wre25 , Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
  • √ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
  • √ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
  • √ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).
Check Stock

Hamolar 3 Pack 80/60 AMP 12V DC Waterproof Car Relay and Harness - Heavy Duty 12 AWG Copper Wires, 5-PIN SPDT Bosch Style Automotive Relays Kit

  • Function: 12VDC (14V Max) waterproof 5-Pin SPDT (Single Pole Double Throw) Relay with 80A/60A High Switching Capability. Excellent ability..
  • The Bosch style relay adopts sealing technology at the bottom and a fixed back strip on the back, excellent waterproof and dustproof ability, suitable for various complicated installation environments..
  • Waterproof construction & heavy duty 3*12 AWG and 2*16 AWG cables, length: 5.1 in, which have higher load-bearing capacity and more stable performance..
  • Wire Specifications: White – Ground (85), Blue – VDC (30), Black – Trigger (86), Red – Output N/C (87a), and Yellow – Output N/O (87)..
  • Relay kit made by high-grade flame retardant materials to ensure superior quality and long lifespan. 2 Years Warranty..
Check Stock

ATO Phase Voltage Monitoring Sequence Relay 1 Phase Voltage Protection Relay Under Over Voltage with 1 CO + 1 NC Contacts AC/DC 24-48V

  • 【Measuring Circuit】Phase sequence protection relay is compatible with AC and DC supply, the rated voltage is AC/DC 24-48V.
  • 【High-quality Product】LCD display indicating voltage, operation and fault status, adjustable reset mode: automatic/manual/automatic with power-on delay reset, fault recording for the lately 3 faults.
  • 【Mutiple Functions】Adjustable overvoltage and undervoltage threshold, independent adjustable delay time for over-voltage, under-voltage.
  • 【Output Contacts】Monitoring relay with 1 CO + 1 NC contacts, and the capacity is 6A, 250V AC (resistive load).
  • 【Wide Applications】Voltage monitoring sequence relay can be applied in equipment or devices from undervoltage and overvoltage in the applications like air compressors, electric motors, pumps, fans, air-conditioning system, blowers, elevators, cranes, refrigeration equipment, laser equipment, industrial control system, etc..
Check Stock

NOYITO 0-5A AC Current Detection Sensor Module Switch Output (DC 12V, Green)

  • Current detection range: AC 0-5A.003cbr003e.
  • Operating voltage: DC 5V / 12V / 24V ± 0.2V. (Select the corresponding version of the product according to your needs).003cbr003e.
  • Output mode: relay switching output.003cbr003e.
  • Relay load: AC 250V 10A Max , DC 30V 10A Max.003cbr003e.
  • Application: Intelligent trolley motor over-current detection, motor stall protection current detection, short-circuit protection detection, etc. (The second picture on the left is the schematic and the third picture is the wiring diagram)003cbr003e.
Check Stock

VOSAREA 4-Terminal 12V Solenoid Relay Heavy Duty Car Refit Solenoid Valve Auto Control Switch Fit for Ford Starter Car Truck SW3 SNL135

  • Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance, sealing is made of....
  • 12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post..
  • Maximizes performance. Made from high-quality materials. Easy installation.
  • Ensures Solenoid Relay SW3. B6AZ-11450-A. Suitable for AEROSTAR, BRONCO, BOBCAT, BREEZEWAY, CALIENTE, CAPRI, COMET, COMMUTER, COUGAR, CYCLONE,....
Check Stock

Sensor Switch CMR 10 Contractor Select Ceiling Mount Occupancy Sensor, 28 Foot Radius, White

  • PIR occupancy detection, self-contained relay.
  • Interchangeable hot & load wires.Push-button programmable.
  • Note: Item indicates Large Motion 360°, which is alternately described as “Large Motion Extended Range”.
Check Stock

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

  • Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
  • Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
  • Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
  • This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
  • Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

275KXX-240VAC Electromechanical Relay 220/240VAC 500Ohm 15A 3PST-NO-DM (75.8x58.9x85.6)mm Contactor Relay

  • Size (Approx.): 85 x 65 x 65mm/ 3.3" x 2.5" x 2.5"(L*W*H).
  • Package Content: 1 x High Power Relay + 8 x Terminals.
Check Stock

Relay Module,AC100V-250V 30A High Power 4CH Relay DC5V High Low Level Trigger Switch Module

  • This high-low level 4-channel relay is for sending open signal and close signal to 4 relays..
  • Large load capacity, the relay can connect to maximum 30A, 250V loads..
  • High or low level trigger can be selected by jumper..
  • Easy to use, designed with screw terminals for convenient connection..
  • Four mounting holes are great for installation..
Check Stock