Best Locking Connector

2 Pin Connector Waterproof Connector, Industrial Solder Power Connector, Aviation Cable Connector for Automotive, Marine, Lights and Other Indoor/Outdoor Electrical Wire Connections(Metal+Plastic)

  • 2 Pin Connector Specifications: The working voltage of the power connector can reach 400VAC, and the rated current is 10A. General wire diameter: Φ3.0mm~Φ9.0mm. Cable specification: 1.0 --1.5mm²/18-16 AWG. Contact resistance .
  • High-Quality Material: Our 2 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Use metal material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Cable Wire Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds..
  • Perfect Waterproof Wire Connectors: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in water-resisting. Even....
Check Stock

WERJIA Hard EVA Travel Case Fits Tascam DR-07X Portable Digital Recorder

  • Tascam DR-60DMKII + EMB Cable + Gravity Magnet Phone Holder Bundle.
  • Fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limits of the camera’s microphone in.
  • Record up to 4 channels at a time to the internal SD Card, at up to 96kHz/24-bit WAV file resolution.
  • Two mic inputs utilize locking XLR connectors with 48V phantom power.
  • the other two use a 1/8” stereo connector for wireless and lav mics.
  • The channel 3/4 input connector supports a high-level maximum input – up to +10dBV.
Check Stock

Monster Prolink Monster Classic Instrument Cable - 12 ft - Right Angle to Straight

  • BUILT FOR PERFORMANCE: Built with Monster's exclusive Time Correct Windings for deeper bass, and Speakon corrosion-resistant connectors.
  • NOISE REJECTION: The multi-gauge wire construction and high-purity copper conductor shields from signal interruptions and reduces noise.
  • LONG-LASTING QUALITY: The Duraflex outer jacket resists cuts and abrasions and provides lightweight flexibility that makes it easy to manage on stage.
  • SELF-LOCK CONNECTOR: Features Monster's custom self-locking twist-lock connector for secure plugging or unplugging even on the road.
  • LIFETIME CABLE WARRANTY: Covered by Monster's 100% replacement guarantee.
Check Stock

Neewer XLR Splitter Female to 2 Male Cable, 3-Pin XLR Female to Dual XLR Male Patch Y Cold Balanced Microphone Splitter Cable Audio Adapter — 1.6 Feet

  • 【XLR Female to Dual Male Mic Cable】 This 3-pin XLR female to dual XLR male Y cable is designed to connect an XLR output to two XLR inputs. Ideal for splitting a microphone signal into two channels on a mixing console.
  • 【Wide Compatibility】 Compatible with a wide range of equipment with 3-pin XLR connectors such as shotgun microphones, vocal harmonizers, mixing boards, patch bays, preamplifiers, speaker systems, audio mixers, amplifiers, equalizers, limiters, audio crossovers, digital decoders, and stage lighting instruments.
  • 【Durable & Flexible】 Nickel-plated connectors come with metal locking latches for secure locking. This cable uses oxygen-free copper (OFC) and cable shielding to reduce electromagnetic interference (EMI) and radio-frequency interference (RFI).
  • 【Balanced Connection】 The pin 1 / pin 2 / pin 3 of the male connector is connected to the pin 1 / pin 2 / pin 3 of the female connector respectively. The balanced connection helps reduce interference and provides a pristine signal.
  • 【Splitter Cable】 This cable just splits a stereo signal into two mono signals.
  • It doesn’t combine two signals into a stereo signal.
Check Stock

Dumble L5-30R Connector with RV Power Cord Cover & Ring – 30 Amp Twist Lock Inlet Locking Plug Protector 30A 125V

  • KEEP CORDS SAFE: The Dumble RV Supplies | 30 Amp Locking Connector with Cover Boot and Ring is designed to secure and protect your cord connector and....
  • USE YOUR CONNECTOR: Quickly locks the cord set in the inlet.
  • Side grips for an easy and secure connection.
  • Designed for use with round jacketed, hard....
  • PERFECT SIZE: 7.5-inch (19.1cm) assembly overall length.
  • Cover and ring – 1.75-inch (4.4cm) inner diameter (ID).
  • BUILT TO LAST: Cover constructed with a bright yellow rubber body and black heavy-duty plastic ring for extra longevity with no leaks.
  • Remove housing by loosening face screws, slide weather-resistant boot over cable, and slide housing over cable.
Check Stock

ABN L5-30R Connector with RV Power Cord Cover & Ring – 30 Amp Twist Lock Inlet Locking Plug Protector 30A 125V

  • KEEP CORDS SAFE: The ABN 30 Amp Locking Connector with Cover Boot and Ring is designed to secure and protect your cord connector and keep a....
  • USE YOUR CONNECTOR: Quickly locks the cord set in the inlet.
  • Side grips for an easy and secure connection.
  • Designed for use with round jacketed, hard....
  • PERFECT SIZE: 7.5-inch (19.1cm) assembly overall length.
  • Cover and ring – 1.75-inch (4.4cm) inner diameter (ID).
  • BUILT TO LAST: Cover constructed with a bright yellow rubber body and black heavy-duty plastic ring for extra longevity with no leaks.
  • Remove housing by loosening face screws, slide weather-resistant boot over cable, and slide housing over cable.
Check Stock

Rode RODELink LAV Omni-Directional Miniature Microphone, Black

  • A professional-grade wearable microphone designed for use in a wide range of applications.
  • The locking TRS connector pairs perfectly with the RODELink range of wireless microphones and most recorders with a 3. 5mm locking microphone input.
  • Features a discreet 4. 5mm omnidirectional microphone, which picks up sound from all directions, making it very forgiving when it comes to placement on talent.
  • A foam pop shield is supplied to minimise wind noise and vocal plosives, as well as a durable mounting clip with in-built cable management for quick and easy rigging.
  • It also features a hard-wearing Kevlar reinforced cable, designed to withstand the rigours of any shoot.
Check Stock

Hubbell-Raco 4714 THE INSIDER 1/2-Inch Trade Size Nonmetallic Sheathed Cable Connector 100-Pack

  • Use The Insider in dry locations to connect one or two runs of Nonmetallic Sheathed Cable (NMSC) to a box.
  • The Insider and NMSC can be used with steel boxes, panel boxes or plastic boxes with knockouts.
  • The only NMSC Connector that is UL tested for use with an eccentric knockout.
  • Snap-in locking tab design secures THE INSIDER into the removed 1/2-Inch knockout securely.
  • Can be easily removed by pushing one of the locking wing tabs with a screwdriver.
Check Stock

1 Foot – Directional High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2549 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2549 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, im....
Check Stock

CURT 58170 Vehicle-Side 7-Pin Round Trailer Wiring Harness Socket

  • SPRING-LOADED COVER. To promote long-lasting use and weather resistance, this round 7-pin trailer wiring socket comes with a spring-loaded dust cover. It protects the 7-way connector when not in use, shielding it from the outdoor elements.
  • VERSATILE DESIGN. This connector makes a great replacement 7-way wiring socket. It connectors and connects the taillights, brake lights, turn signals, reverse lights, electric trailer brakes and an auxiliary power wire.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this 4-pin trailer wiring connector is made from strong, durable die-cast metal.
  • RELIABLE CONNECTION. This 7-way round trailer wiring socket is equipped with a locking tab on the inside of the dust cover that secures the plug in place when inserted. This helps maintain a reliable wiring connection.
  • WEATHER-RESISTANT. To help protect the splice-in wiring connections, this 7-wire vehicle socket features concealed terminals, keeping the wires from direct exposure to rain, dirt, road salt and other corrosive threats (wires not included).
Check Stock