Best Long Threaded Rod

Chromex Chimney Cleaning Set - 8 Piece - 24 Foot Fiberglass Chimney Rod and 6 Inch Chimney Brush

  • Chromex 8 Piece - 24 Foot Fiberglass Chimney Rod Kit with interlocking threaded ends. Polypropylene 6 Inch chimney cleaning brush with steel center....
  • Heavy duty steel 1/4 Inch threaded fittings - Compatible with our Chromex chimney brush and all standard chimney brushes that use this size connector.
  • 8 - 3 Foot - 55 mm - strong fiberglass rods designed to absorb pressure but also flexible enough not to break..
  • Galvanized steel stem - Heavy duty twisted spiral stem for long-lasting use. 1/4 steel NPT fittings which work with our chimney rods as well as any....
  • ChromeX manufactures thoughtful tools and accessories for both the do-it-yourselfer and the professional. Customer satisfaction is our main priority,....
Check Stock

DPS6 Clutch Tool Double Dual Clutch Dry DPS6 Transmission Reinstall Reset Tool for Ford Volvo Focus Fiesta #307675

  • 【Fit on】 Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 Equivalent to OEM 205-1017..
  • 【Instruction】Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.Spare Top Plate Part No 1681, Spare Force Screw Assembly Part No 1682. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing..
  • 【Satisfaction Guarantee】 We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. We also support a 12-month warranty..
Check Stock

MMC77 Copper Base Anti-Seize Lubricant Compound 2100°F (8oz)

  • BustApart Copper Aerosol Spray is an Anti-Seize Lubricant Formulated To Withstand High Temperatures And Extreme Pressures.
  • Contains Rust And Corrosion Inhibitors To Assure Long Life Of Connectors.
  • Use: All Threaded Fittings, Bolts, Axle Shafts, Valves, Gaskets, Flanges, “O” Rings, Bushings, Bearings, Rollers And Conveyors, Gears, Transmission Boxes, Chains And Drives, Electric Motors, Compressors, Hoists, Turbines And Winches, Furnaces, Burner Assemblies, Regulators, Pumps, Valve Stems, Manifold And Stud Assemblies, Fuel Injectors, Pre-Combustion Chambers, Turbo-Charger Fittings, Guides And Thread Tubing, Keyways And Spark Plugs, Torque Rod Pins And Tubes,.
  • Copper Prevents Seizing, Galling And Premature Wear by Sealing Out Moisture, Gases And Corrosive Fluids From Threaded Connections.
  • Spray Aerosol is designed to make application quicker and storage longer lasting than conventional anti-seize applicators.
Check Stock

CCC, French Press 5 Part Stainless Steel 3.75 Inch Wide Plunger Assembly For Flat Top 34 oz 8-Cup 1 Liter Coffee Press Replacement Part

  • ...r Chef, Utopia Kitchen & other flat lidded "8-Espresso Cup" 32|34oz French Press coffee makers.
  • Not OEM Bodum, Compatibly Manufactured by CCC for flat lidded 1 Liter French Press Coffee Makers.
  • [DIRECTIONS FOR USE] Take apart your old plunger & thread the rod into the hole on you flat lid.
  • Carefully start the finely threaded nut with rounded opening on top – if it gets “cross threaded” it will get stripped.
  • spiral plate first, mesh filter sandwiched with cross plate below & thread the stem of the cross plate over the rods end, screw the closed nut snugly down (it will rest on your spiral plate)..
  • [GOOD QUALITY MATERIALS] 304 GRADE Stainless Steel (SS) PLUNGER ROD with closed nut, cross plate with threaded stem, spiral plate, one 18/8 SS wire mesh filter with a SS plunging knob.
  • Try CCC's 34oz Replacement Glass - it's FIRE TOUGHENED with measures.
  • Also Filter Parts, Cross, Filter and Spiral plate assemblies.
  • and Pour Over options to use on your press carafe coming soon..
Check Stock

CEE 10Pack M8 x 250mm Fully Threaded Rod Stud 304 Stainless Steel 5/16\ x 10\ Long Threaded Screw, Right Hand Threads, M8-1.25 Thread Pitch

  • Material: 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • Package including 10 pcs Threaded Rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Applications : Anchor bolts, clamps, hangers and U-bolts and many more projects.
Check Stock

Dumble RV Stabilizer Jacks Camper Leveling Blocks 2-Pack – Heavy Duty Leveling Blocks for Trailer, Camper, Motorhome

  • For stabilizing only recreational vehicles – Do not use to raise.
  • FITS YOUR RV & TRAILER: Adjustable from 11.5 inches to 17.5 inches (29.2cm to 44.5cm).
  • Make sure the height is correct for your use.
  • Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod.
  • Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application.
  • BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT).
  • All components constructed from aluminum for maximum strength and longevity that resists corrosion.
  • RV levelers nest into each other (stack) for storage.
  • EASY TO USE: The long bolt in the center of the jack stand is threaded.
  • At the top of the jack stand is a large nut that fits into a pocket to keep it from turning.
  • The center bolt raises and lowers by turning the long bolt with the T-handle, either clockwise or counter-clockwise.
  • Place under a section of sub frame close to the corners.
  • We recommend using wood or concrete blocks under jacks.
  • PACKAGE CONTENTS: Package includes (2) RV leveling jacks to support a total of 12,000 pounds (5,443kg).
Check Stock

2.75-lbs Rectangular Retort Base & Rod Set - Base: 8\x5\ - Rod: 23.6\L (60cm) x 12mm Dia. - Heavy Duty, Corrosion Resistant Steel - Eisco Labs

  • HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a rod made of steel.
  • STABILITY || Total weight of 2.75 lbs. The 8" long by 5" wide base weighs 1.6 lbs and is fitted with rubber feet, providing superb stability for experiments & setups - The included rod measures 23.6" (60cm) tall, is 12mm in diameter, and weighs 1.15 lbs.
  • TAPPED HOLE AND THREADED ROD || Base features a tapped hole, which fits the included rod, and can accommodate other rods with a 10mm x 1.5mm metric thread.
  • GREAT FOR CLASSROOM & HOME LABORATORIES || The durable and sturdy construction of this set makes it an excellent choice for science classrooms, household laboratories & basic professional laboratory setups.
  • MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind.
Check Stock

Feelers 304 Stainless Steel M6-1.0 Fully All Threaded Rod, Long Threaded Screw, Right Hand Threads, 250mm Length【Pack of 2】

  • Material: Made of 304 stainless steel, ductility at high temperatures, and low magnetic permeability..
  • Package including 2 pcs rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Different Length of the rod can be widely used in many occasions. Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

Marinetech 55-5100 Balljoint, (Pack of 2)

  • Ball stud is 3/8-24 thread by 1-7/8" long.
Check Stock

Clamping Handle Nut, Knob Clamping Handle Durable Through‑Hole Knob Clamping Handle Wear‑Resistant Nuts Knob Grip for Clamping Knobs(CM832 (Through Hole))

  • Knob handles are made of high quality plastic and Nickel plated threaded rod for durability and long service life..
  • Thread rod Surface Finishing:Zinc Plating.
  • Package Content:2 x Knob Handle Grips,2 x Screws,2 x Sheets.
Check Stock