18 Gauge Electrical Wire 3 Conductor, 32.8ft Black PVC Case Stranded Low Voltage LED Cable, 18 AWG 3pin Tinned Copper Hookup Wire, Flexible Extension Power Cord for LED Lamp Lighting Strips Automotive
【Specification】18 Gauge 3 conductor wire(Red & Black & yellow). 32.8ft/10M. Maximum input voltage: 300V. Maximum current: 7.5A. Rated working temperature up to 80℃/176℉. Material:PVC+Tinned Copper..
【High Conductivity】18 gauge electrical wire has 34 strands of tinned copper wire inside each cable. The high-precision oxygen-free copper contained in tinned copper has lower resistance and higher conductivity..
【Durable Material】The extension cord has an even thickness PVC bush to protect the cord from fraying. It has the characteristics of flame retardant, safety and stability, anti-aging, acid and alkali resistance, moisture resistance and so on. The copper core have a high melting point and is not easy to melt..
【Easy to Use】 Our 18AWG wire has the characteristics of high conductivity, low resistance, soft, and can be twisted and extended at will. Easy to peel and cut. Tinned copper wire is easy to solder and suitable for low voltage (5V-12V-24V) installations..
【Wide range of uses】18/3 low-voltage cable extension cords are very suitable for LED monochrome light strips, electronic and electrical equipment, transformers, LED lights, LED splitter connections,automotive,speaker wire etc..
4 Gauge Audio Amplifier Installation Wiring Systems KIT,Make Connections and Brings Power to Your Radio,Subwoofers and Speakers
17FT High Performance RCA Interconnect Cable.
Low noise and distortion, this amplifier runs quietly and efficiently..
With a Gold Plated AGU In-line Fuse( maximum current:60A) Holder to protect the audio system from damage by the overload current..
Great product for the money, All wires are plenty long for your installation needs and Rubber couplings included..
Very easy to install this Audio System Speaker Kit,Top quality and construction of material,Clean package neatly packed, good strong rubberized sleeves for the wires..
The main bar is made of brass with a gilded surface,durable, corrosion resistant, low resistance, gives the good electric flow..
Low resistance, and gives the best electric flow. It is mainly used for car model, aero-model, medical wire, high-end lithium battery plug and other high-end products..
These bullet connector replacements can connect ESC or battery with electronic equipment such as RC helicopter ,car,truck and so on,it can connect motor with electronic speed control(ESC)..
Lantern type public plug structure, good elasticity, good conduction and reliable performance, with strong over load current capacity, can meet the needs of large current charge and discharge ..
LemonBest 2pcs Waterproof Outdoor External 2 Way 2 Pin Electrical Junction Box Underground Cable Line Wires Power Cord Connector Protection
IP67 Waterproof, rubber ring and clamping nut to provide the perfect waterproof performance. It can be installed horizontal and vertical as external junction box to hide electrical connections around your home and any property..
Cable Size: Ø 5-10mm. The connectors include “live wire” “neutral wire” “earth wire”, gold – live wire, silver – neutral wire, black – earth wire, just need to connect the corresponding line correctly..
2 Pin type: Suitable for fast connection to the Lemonbest low voltage outdoor landscape spotlights, and extend wire length. 3 Pin type: suitable for wide range voltage outdoor lighting and external wiring..
Made of high quality plastic, it will not crack or fade in sunlight, durable for years use..
Available in 2 pin and 3 pin. Terminal Block Current: 20A.
Aideepen 5pcs Dual H-Bridge DC Stepper 1.5A 2 Way DC Motor Driver Module Replace Stepper L298N for Smart Car Power
Use of imported original chip, built-in low on-resistance MOS switch.
Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
Minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
Small size, light weight, low standby current, is the ideal choice for your car model.
【Material】: The main bar is made of brass with a gilded surface,durable, corrosion resistant, low resistance, gives the good electric flow..
【Application】: Low resistance, and gives the best electric flow. It is mainly used for car model, aero-model, medical wire, high-end lithium battery plug and other high-end products..
【Function】: These bullet connector replacements can connect ESC or battery with electronic equipment such as RC helicopter ,car,truck and so on,it can connect motor with electronic speed control(ESC)..
【Feature】: Lantern type public plug structure, good elasticity, good conduction and reliable performance, with strong over load current capacity, can meet the needs of large current charge and discharge..
NorthPada 24 AWG 0.2 mm² Electronic Electrical Wire Kit Solid PVC Tinned Copper Single Strand Cable 2 Color 12V Spool Low Voltage 2 x 32 Feet for Current Board Lamp LED Light Car Automotive
Tinned copper PVC Single Strand wire kit.
Rated voltage: max. 300 volts (0 ~ 300 V, 3V 4.5V 9V 12V 24V 110V and other voltage less then 300V).
Cable length: 32 Feet/10 meters per Spool.
For Indoor and Outdoor, used as assorted wire, automotive wire, boat wire, car electrical wire, door bell wire, guitar wire, hobby wire,hook up wire, insulated wire, lamp/LED Light wire, low voltage wire, PCB wire and other devices.
【ADVANCED IGBT INVERTER TECHNOLOGY】This model uses an advanced IGBT inverter design. It has the following advantages: stable wire speed, high no-load voltage, with good compensation of arc force, easy arc starting, less spatter, stable current, and no electromagnetic noise. This machine has both voltage adjustment and current adjustment, which can provide better welding performance to the workpiece..
【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and ....
HYDDNice Wire Connectors Kit Quick Connect 18-22 Gauge 12V DC Low Voltage 2 Wire Splice Connector Kit - 12x T Tap Wire Connectors, 12x 2 Pin Wire Connector, 65.6 feet extension cable
◆【QUICK WIRE CONNECTOR】No wire-stripping required, the electrical connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, you just need to d snap the feeds into these connectors, very easy to use..
◆【WIRE SPECIFICATIONS】 Fit for 18/20/22/24 AWG cable. Please NOTE: As for 18 gauge wire, not all 18 AWG wires are with the exact same diameter in the market..
◆【HIGH PERFORMANCE】Slightly waterproof, heat resistant, fireproof, anti dust and electric shock, can use repeatedly.
◆【WIDE APPLICATION】The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments. It is widely used for various low voltage DC electrical hookups, low-loss in-home..
◆【WORKING VOLTAGE】12V, 24V DC, 300V AC .Working current:0-10A,working temperature:- 30 °C ~ + 85 °C..
