Best Low Elongation

Toolly 8 Pack Magnetic Stirrer - Stir Bars Mixer, PTFE Stiring Rod : 7 Shapes + Magnetic Retriever

  • ➤It is used to stir a liquid or solution in biological, chemical, medical and research laboratory applications..
  • ➤More turbulence and a stronger vortex by stir bars in various shapes: 7Pcs stir bars of different sizes and shapes.
  • 1pc Recycling rod for stir bar retrieval..
  • ➤Suitable for mixing various liquids: Used in most chemicals and solvents, showing inert, strong acid and alkali resistance, water and a variety of organic solvents.Corrosion resistance, no adhesion and non-toxic..
  • ➤Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning. Built-in pivot ring helps reduce vibration and wear during stirring..
  • ➤High & low temperature resistance: Maintain a good mechanical toughness between 196℃ ~250℃. Even if the temperature dropped to -196℃, it can also maintain a 5% elongation..
Check Stock

CrackWeld PRO Concrete Floor Repair Kit – Seal Cracks in Basement Slabs Driveways Garages Pool Decks and More Indoor/Outdoor Fast-Curing No Grinding Needed Complete Repair Kit.

  • No Routing or Grinding Needed. Low-Viscosity Urethane Can Even Repair Hairline Cracks. Reduces Crack Prep..
  • Fast-Curing. Ready For Overlays or Heavy Traffic in an Hour. Reduces Down-Time..
  • Welds the Crack Together. High-Strength Bond (stronger than concrete) Prevents Elongation and Yawning of Cracks.
  • 2-Component Urethane. No recycled Polymers. Made in the USA..
  • Complete Kit - Includes Everything You Need to Repair 100-Linear Feet of Crack @ 1/16".
Check Stock

Phoenix goods V Belt Adjustable Link V-Belt - 1/2-inches x 5-feet A/4L Type A Link Belt

  • Adjustable v belt 1/2-inches x 5-feet, Adjustable length, Material: Polyester/Polyurethane Composite, The long-lasting upgrade to rubber belts in any power transmission applications..
  • Perfect for lathes, drill press, table saws, bandsaws and other woodworking machinery, Commercial Marine, Bowling Centers, HVAC, Greenhouses, Poultry House Ventilation, Roller Drive Conveyors, Agricultural Equipment, snow blower, Air Handlers, sewing machine.
  • Longer belt life – extremely high strength and low elongation under load results in increased belt longevity and durability.
  • Fast, easy installation – belts are made to the required length by hand and roll on to the drive without dismantling drive system components.
  • Reduce vibration - Smooth running with less vibration than solid belts. Reduce inventory – eliminate the need to purchase and inventory numerous belt lengths.
Check Stock

Campingandkayaking Made in The USA. Paddle/Rod/Gear Leash Now with Cinch Lock, 3 Black Leashes and 1 Carabiner. Built to Last.

  • American Owned, USA Made! Now with Cinch Lock! NO HOOK & LOOP TO FAIL! 3 black gear leashes included and 1 carabiner. Hardware imported.1 leash for the paddle, 2 additional leashes for rods or other light gear. If a super long leash is needed, they simply loop together..
  • Fixed elongation, Will not over stretch and loose elasticity. Woven construction and long bar-tack sewn, Built to last..
  • 20 inches of elongation keeps it out of the way but gives you the reach you need when paddling or reeling in the big one..
  • Leashes, good for the water or the woods to keep your light gear safe..
  • A great wading leash. The 20" bungee section takes just the right amount of force to make this a great wading leash. The bungee reduces the jerking of the kayak when attached to you while wading the shallows..
Check Stock

RESIONE 3D Printer Resin F69 Flexible Resin Rubber-Like 405nm UV-Curing Resin TPU-Like Photopolymer Resin for DLP LCD MSLA Printing Black 500g

  • 【High elongation】Elongation at Break: 255%. This can fully ensure that the prints are not easily broken during repeated bending and stretching..
  • 【Tear resistance】Tear Strength: 47.2KN/m. It has better tear strength than other flexible resins, which means that the prints will not be easily....
  • 【Soft like rubber】Shore Hardness:60~75A. The prints is very soft at a temperature above 20°C, but the lower the temperature, the harder it will....
  • 【Wide adaptability】Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market..
  • 【Professional after-sales service】Our customer service team is composed of engineers who have years of experience in resin 3D printing to ensure....
Check Stock

D.N. High Grade White Plumbers Teflon Tape, Plumbing Stop Leaks, Water Sealant Tape Perfect for Shower Heads, Pipe Thread Sealing and Toilet Connectors (1/2 Inch x 480')

  • Size and Quality: D.N. 1/2 inch white plumbers Teflon tape Thickness is : 0.004” (0.075mm), Density:1.3g/cm3, Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%..
  • Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets PolyTetraFluoroEthylene Certifications: CSA 20755, UL MH25811 approved.
  • Water pressure resistance: Each roll of Sealant Tape has a width of 1/2 inch and a length of 480 inches which its Water pressure resistance is 16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%. Our water seal tape Model is Thicker and High density..
  • plumbing tape has a sealing function to prevent the leakage and stop leaks, water Sealant Tape Perfect for shower heads ,Pipe Sealing, ,and Pipe Threads.
Check Stock

Food Grade Silicone Rubber Sheet 12x12-inch by 1/16 White - Duro Shore A65 High Temperature Heavy Duty for Gaskets DIY Food Covers Lids Sealing Material Supports Microwave Oven Protection

  • ???? 3 SILICONE RUBBER SHEET – Includes 1 White Food Safe Sheet of Rubber 12×12 by 1/16 in (30.5×30.5×0.16cm).
  • ✂️ DO IT YOURSELF (DIY) MATERIAL – Great for your home and workplace. Cuts easily w knife/scissors..
  • ⚒️ APPLICATIONS – gaskets vibration reduction insulation leveling abrasion cushioning protection.
  • ????️ LOW/HIGH TEMPERATURE resistance silicone rubber broad temperature range -100ºF to 400ºF.
  • ???? MATERIAL – Silicon Rubber Gasket Material Duro Shore A60 (+/- 5) Tensile Strength 6Mpa, Elongation 400%.
Check Stock

Food Grade Silicone Rubber Sheet 6x6-inch by 1/8 White [3-pack] Duro Shore A65 High Temperature Heavy Duty for Gaskets DIY Food Covers Lids Sealing Material Supports Microwave Oven Protection

  • ???? MATERIAL – Silicon Rubber Gasket Material Duro Shore A60 (+/- 5) Tensile Strength 6Mpa, Elongation 400%.
  • ✂️ DO IT YOURSELF (DIY) MATERIAL – Great for your home and workplace. Cuts easily w knife/scissors..
  • ???? 3 SILICONE RUBBER SHEETS – Includes 3 White Food Safe Sheets of Rubber 6×6 by 1/8 in (15.2×15.2×0.0.31cm).
  • ⚒️ APPLICATIONS – gaskets vibration reduction insulation leveling abrasion cushioning protection.
  • ????️ LOW/HIGH TEMPERATURE resistance silicone rubber broad temperature range -100ºF to 400ºF.
Check Stock

SainSmart TPU 1.75mm 92A Flexible TPU 3D Printer Filament, Dimensional Accuracy +/- 0.04 mm, 1KG, Pastel Skin

  • Recommended extruder temperature:195 - 230°C.
  • Recommended platform temperature: 40 - 60°C.
  • Compared to 95A filament, this 92A TPU Filament exhibits the following properties: higher elongation and abrasion resistance, better elasticity with highly reversible deformation and rebound resilience..
  • Low warping and stringing, resistance to oils, greases. Printing 92A Filament requires more tweaking than the 95A ones, but with the profile provided by us (find the product description below), printing with it would be much easier..
  • Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers..
  • 92A TPU Filament can be used to produce elastomer parts like protective covers and vibration dampeners, widely used in the sectors of electronics, automotive, consumer goods, and sports equipment..
Check Stock

SainSmart TPU 1.75mm 92A Flexible TPU 3D Printer Filament, Dimensional Accuracy +/- 0.04 mm, 1KG Spool, Pastel Skin

  • Recommended extruder temperature:195 - 230°C.
  • Recommended platform temperature: 40 - 60°C.
  • Compared to 95A filament, this 92A TPU Filament exhibits the following properties: higher elongation and abrasion resistance, better elasticity with highly reversible deformation and rebound resilience..
  • Low warping and stringing, resistance to oils, greases. Printing 92A Filament requires more tweaking than the 95A ones, but with the profile provided by us (find the product description below), printing with it would be much easier..
  • Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers..
  • 92A TPU Filament can be used to produce elastomer parts like protective covers and vibration dampeners, widely used in the sectors of electronics, automotive, consumer goods, and sports equipment..
Check Stock