Best Low Insertion Loss Product

High Performance Low-Loss 6 Way Coaxial Splitter for HDTV TV Antenna and Satellite 18K Gold-Plated Chassis 2GHz - 5-2050MHz All Port DC Power Passing

  • 【Low insertion loss】: high Return loss and isolation for better performance on TV and satellite signal.
  • 【Fast and easy installation】: Reference pictures to connect. Note that the amplifier is properly connected..
  • 【5-2050Mhz (2Ghz) frequency range】: compatibility with all digital ready RF signals.
  • 【18K gold-plated chassis】: precision Zinc die-cast for maximum signal transfer and corrosion resistance.
  • 【High shielding structure】: lower digital noise and higher signal quality.
Check Stock

TV Antenna - Amplified HD Indoor Digital TV Antenna Long 330+ Miles Range Antenna Support 4K 1080p Fire Stick and All Television Indoor Smart HDTV Antenna for Local Channels VHF UHF-17ft Coax Cable

  • ...omponent inside the device receives the internal pressure of 15 psi. Suitable for indoor, outdoor, wet / dry environments..
  • 【LOW SIGNAL LOSS】The frequency range of this coax splitter supports up to 5-2400MHz (2.4GHz), and internal circuit board for better reliability/durability. High shielding structure with low insertion loss, high return loss and isolation for better performance on TV, satellite and all other devices’ signal. Between 1750 and 2400MHz there is low signal loss of only 4.5db on each output port improving performance and speeds..
  • 【INSTALLATION STEPS】①Prepare the coaxial cable and F-type male connector②Strip the coaxial cable③Connect the coaxial cable to F-type male connector④Connect the coaxial cable to the coaxial splitter. In order to make your satellite connection balance and easier, all coaxial ports of the dispenser are power passing. (NOTE: ONLY One Highest Voltage is Allowed to Pass At A Time).
  • 【WHAT YOU GET】1x Coaxial Splitter, 1x Screws. We offer 1 year 100% Money-Back Guarantee, pls contact us via Amazon, we will reply within 24 hours..
Check Stock

10-Pack LC to LC Duplex Single Mode Coupler, Fiber Optic Adapter for Singlemode Fiber Patch Cable

  • 10-Pack LC to LC duplex fiber coupler/fiber optic adapter.
  • Connect two singlemode/multimode duplex LC/LC patch cords together.
  • All products are polish cleaned and are dust cap covered.
  • The fiber couplers with low insertion loss and high stability.
  • The fiber adapters have more than 1000 insertions and removals.
Check Stock

Honeywell Home Howard Leight by Laser Lite High Visibility Disposable Foam Earplug Refill for Leight Source 500 Dispenser 500 Pairs LL-1-D Magenta/Yellow

  • LASER LITE HI-VIS COLORS: Vibrant yellow & magenta color is highly visible from a distance to help ensure employee compliance and hearing safety.
  • it also helps prevent loss or misplacement.
  • EXCELLENT NOISE REDUCTION (NRR 32): Self-Adjusting foam earplugs expand in the ear upon insertion to create a secure seal for excellent hearing protection in loud workplaces and jobsites.
  • IDEAL FOR SMALLER & LARGER EARS: Small size of earplug delivers optimal fit and ear protection for smaller ears, but low pressure foam expands to fit virtually any size ear and ear canal.
  • COMFORT & HYGIENE: Contoured T-shape allows for easy insertion and removal.
  • Smooth, soil-resistant, closed-cell foam skin helps prevent dirt build-up.
  • LEIGHT SOURCE 500 DISPENSER REFILL: 500-pair refill box for use with the Leight Source 500 Earplug Dispenser (LS-500).
Check Stock

Pasow F81 Barrel Connectors High Frequency 3GHz Female to Female F-Type Adapter Couplers (10 pcs, Silver)

  • Ideal for connecting 2 F-Pin cables, and extending the connection of a cable box, TV, satellite receiver, VCR, cable modem, off-air antenna or other digital audio/video component. Each connector comes individually packaged to guard from scratches..
  • Flat port ends on each side of the connector ensures moisture ingress protection and maximum rejection of the hum/static from RF and EM interference..
  • 3GHz connectors are built with nickel-plated brass for lasting performance, while its low-profile size adds a mere 1.02″ to your high-frequency cable run..
  • Accommodates most Male F-Type connectors and wall plates for indoor and outdoor settings alike..
  • Achieves high-quality return loss and insertion loss specifications, when compared to conventional F81 connectors..
Check Stock

HMC472 Digital RF Attenuator Module DC-3.8GHz Parallel 0.5dB Step 31.5dB Attenuation Value

  • Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
  • Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
  • Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
  • Objects Used :Suitable for a variety of RF and IF applications..
  • Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..
Check Stock

Gam3Gear Surecom SW-102S SO239 Connector Digital VHF UHF 125-525Mhz Power & SWR Meter

  • VSWR. Forward and reflected power direct digital readout, without any calibration. NOTE: DOES NOT compatible with Digital Radio..
  • Maximum measurable power range up to 120W.
  • Low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
  • Build in Frequency country. Interface (in and out ): SO239.
Check Stock

YUCHENGTECH Electric Chisel Carving Tool 50000 rpm Electric Wood Chisel Carving Machine Woodworking Chisel Carving Tool (220V)

  • ❤【No carbon brush handle】: 50000 RPM high speed, 6.0ncm strong torque, internal spring single card spindle design, high concentricity, handle is still stable at high speed. At the same time, it conforms to the ergonomic design, streamline modeling, and feels as smooth and comfortable as a pen..
  • 2.❤【Low noise】: No carbon brush, not easy to wear, low noise, low friction, low loss and longer service life..
  • 3.❤【Upgraded motor】: The maximum speed is 50,000 rpm, the load is not easy to heat, and the high-speed rotating motor works stably..
  • 4.❤【Foot switch】: Four-hole insertion, stable and firm. Through the foot pedal control speed, easy to operate. Hand foot combination greatly improves work efficiency, convenient to start or stop at any time..
  • 5.❤【One machine with multi-purpose】: more complete functions, you can choose different function accessories, can carve various materials, such as: jade carving, wood carving, stone carving, metal, nail, denture..
Check Stock

6 Duplex LC Adapters LGX Footprint Fiber Patch Panel Loaded 12 Fiber Ports Couplers Enclosure - LC UPC Blue Compatible with SingleMode Multimode|1.25G/10GB OS1-2/OM1-3)

  • ...ional Compatibility】6 Duplex LC LGX Footprint Fiber Patch Panel Compatible with Various types of optical fiber(SingleMode Multimode|1.25G/10GB OS1/OS2/OM1/OM3 LC Port Universal).
  • ★ These LC-LC Fiber Adapter comply with IEC 61754-4, IEC 60784-14 and TIA 604-3 and conform to RoHS standards..
  • 【High Return Loss,Low Insertion Loss,Low Attenuation】This LC to LC Fiber Coupler are lightweight due to their plastic bodies. Mating sleeves are made of ceramic, which provides low loss and high signal integrity. As well as connectors, you can identify them by their Blue color..
  • 【Widely Used】12 LC Fiber Ports Couplers is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds,Local Area Networks, Data Center, Premise installation, Wide Area Networks,Commercial and so on.
  • Audio, video, sfp data services supported and Connects to SFP Transceivers Ethernet Switches and Media Converters. Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial..
Check Stock

MX72 Duplexer 1.6-30MHz / 140-150MHz / 400-460MHz HPF HAM Antenna Combiner VHF UHF Transit Station

  • Suitable for two dual-band V/U devices. Can be used as a transit station..
  • Supports wide signal response of 1.6-225MHz LPF and 340-1000MHz HPF..
  • Low insertion loss that lower than 0.1dB of LPF and lower than 0.2dB of HPF..
  • Applicable to 2 devices connecting with 1 antenna..
  • Made of high quality ABS, which enables this ham antenna combiner to work for a long time..
Check Stock