Silicone Seal Strip - 10M/33ft Weather Stripping Door Window Seal - Door Strip Bottom Draft Stopper (25MM, Transparent)
10M/33ft Weather Stripping Door Seal Strip: Compared with most similar products of 16.5 feet ,this silicone weather stripping have 33 feet ,which is long enough for you to use..
Silicone Window Seal Strip: This weather stripping silicone can stay away from windproof, dust-proof, weatherproof, energy-saving, soundproof. And Widely used for frameless sliding doors, glass doors, door bottom, plastic-steel windows and aluminum windows, sliding door, shower room and so on..
The Door Bottom Seal: Made Of Silicone Made of silica gel material, installed on the glass doors or windows to reduce the damage caused by the collision. And non-toxic and environmental friendly. It not easily damaged by sunshine or rain..
Easy To Install: Please wipe up the dust before using. Cut to the required length, and then remove the adhesive. When the room temperature is low, it would be better if you use electric hair drier to heat the sealing strip back adhesive..
In winter, the viscosity of the silicone seal strip will decrease. You can put the weather stripping in a warm place for a period of time before using it. In addition, it is recommended to wipe the surface before use to avoid dust causing the viscosity to decrease..
Mega Cargo Control ½ Bolt-On D-Rings Tie-Down Anchors | Lashing Rings with Mounting Brackets | Trailers Trucks RV Campers Vans ATV SUV Boats Motorcycles 200-Pack
⭐ MEGA CARGO CONTROL TIEDOWN ANCHOR HARDWARE: 1/2" BOLT-ON D-Ring. Working Load Limit: 4000 LBS. Breaking Strength 12000 LBS. These D Rings can hold up to 4000 LBS. Made by heavy-duty solid steel to ensure the quality of these D-RINGS- STRONG & DURABLE. Easy to use, simply bolt these d ring on your truck, flatbed trailer, utility trailer enclosed trailer, cargo-van, bobtails, dry-van, container, tow truck, tow dolly, etc..
⭐ BOLT-ON TIE DOWN D RING: These Bolt On D-Rings Go perfectly with ratchet tie-down straps, cam-buckle tie-down straps, tie-down assemblies with s hooks, tie straps with flat hooks, or lashing straps with wire hooks, rope, rubber bungee straps, EPDM tarp straps. A strong anchor point with the Working Load Limit of 4000 LBS. Fits with various applications. Durable, Reliable & Heavy Duty- The perfect solution for your transportation needs..
⭐LASHING ANCHOR POINT D RINGS: These D Rings are Zinc plated for superior corrosion- and rust- resistance. Once these Drings are mounted, you can USE THEM AS TIEDOWN ANCHORS for motorcycle straps, bungee cords, tarp straps, small chains, ratchet and cam straps, ropes, and other tie-downs.Ideal for securing kayaks, ATVs and other power sport equipment, bikes, refrigerators and similar a....
Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100
CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100
CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
High Temperature Resistant Automotive Wiring Harness Tape Wiring Loom Tape(32mm*15m)
Temperature & Oil Resistance: Made of Polyester cloth base with strong acrylic pressure sensitive adhesive materials, this automotive high temperature wiring harness tape has strong ability of corrosion resistance, oil resistance, high and low temperature resistance, wear resistance.
High Viscosity & Good Flexibility: High viscosity, no hazardous substances, automotive high temperature tape wiring harness tape has good flexibility, anti-tear. Size: (L) x (W) 9mm x25 m, 19mm x15m, 32mm x 11.5m (Optional).
Easy To Operate: Low temperature is not hard, easy to operate,automotive harness tape wiring harness tape has excellent stain resistance, aging resistance, also has a certain isolation minus sound effects. Hand tear, easy to operate, winding harness, specifically for the automotive industry.
Wide Application: This automotive wiring harness loom tape can be used in the engine compartment and the passenger compartment harness machine after conversion winding insulation and protection. Ideal for automotive interior parts of the harness use noise reduction, such as the dashboard wire harness and main harness wound.
What You Will Get: We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have a....
TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
