Best Ls Manifold Clamps

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

SAMSUNG 15m One Invisible Connect Cable for QLED 4K & The Frame TVs (2019) - White - VG-SOCR15/ZA

  • The Samsung One Invisible Connection Cable Minimizes Clutter And Uses A Single, Near-Invisible Cable To Connect Your Qled To External Devices, Including The Power Source. The Result Is A Seamless Surface That Hides Cables And Integrates Beautifully In Your Home..
  • Extended Cable Length For A Clean Look: With 15M, The One Connect Box Can Be Positioned Out Of View. Reimagine Your Tv Where You Want It, Not Where It Plugs In..
  • Blends With Your Home: One Cord. No Clutter. Say Goodbye To Messy Tangled Wires. Hide All Your Device Connections With The One Invisible Connection Cable, And Your Space Will Never Be The Same..
  • Compatibility-2019 TVs:QN75Q90RAFXZA, QN65Q90RAFXZA, QN65LS03RAFXZA, QN55LS03RAFXZA, QN49LS03RAFXZA, QN43LS03RAFXZA. 2020 TVs:QN75LS03TAFXZA, QN65LS03TAFXZA, QN55LS03TAFXZA, QN50LS03TAFXZA, QN43LS03TAFXZA. 2021 TVs:QN43LS03AAFXZA, QN50LS03AAFXZA, QN55LS03AAFXZA, QN65LS03AAFXZA, QN75LS03AAFXZA.
Check Stock

Michigan Motorsports Front Crankshaft Damper Seal Gen 3 Gen 4 LS LS1 4.8 5.3 5.7 6.0 6.2 7.0

  • Michigan Motorsports LS1 Front Crankshaft Damper Seal.
  • Fits all 1997-2013 Gen 3&4 LS Based V8 Engines.
  • LS1 LS2 LS3 LS6 LS7 LS9 L99 LSA LS9 L92 L9H L94 LS2 L76 L77 LY6 L96 LFA LZ1 LY5 LMG LMF LH6 LC9 LY2 L20 L33 LQ4 LQ9 LR4 LM7 L59 LS4 LH8 LH9.
Check Stock

Kenwood 10 Speaker Foam Surround Repair Kit - 10 Inch

  • Fits Kenwood JL-767, JL-830, KFC-W210, KFC-HQW250, KFC-WF252, KSC-9901, KL-44, LS-1800, LS-1900, LS-405, LS-405A, LS-405B, LS-407, LS-44, LS-9000X,....
  • Same surrounds that professional reconers use.
  • Complete 2 speaker foam surround installation kit - 10 inch.
  • Easy to follow step-by-step installation instructions and videos.
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

Serial Cable DS2208-SR DS3608 DS6878 DS9208-SR CS3070 LS2208 DB9pin Female Cable for Symbol Cable Zebra Barcode Scanner Cable 3M / 9FT Coiled RS232 Port

  • RS232 to JR45, 3 meters / 9.84ft, coiled serial cable for Symbol barcode scanner Zebra barcode scanner Motorola barcode scanner..
  • Fit for Symbol barcode scanner model: LS1203, LS2208/AP, LS4008I, LS4208, LS3008, LS3408, LS3408-FZ, LS4278, LS3478, LS3578,LS9208i, LS9203i,....
  • If you're not sure, or any other questions, just contact us before or after purchasing, support custom..
  • Our barcode scanner cable has safety certification, and 30 days return policy We strictly supervise production to ensure product quality and safety..
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's(1999 & Newer )With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock