uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit
Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Hymnorq Metric 1.0-10 mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill Bits Set of 19pcs for Metals, Packed in Indexed Metal Case
COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
19PC METRIC SET - The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Well organized in a tough metal indexed storage case for easy transport to your worksite..
FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to ad....
Drill America DWD115J-CO-SET 115 Piece m35 Cobalt Drill Bit Set 1/16 -1/2 A-Z #1-#60 DWDCO Series
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel....
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
Round shanks allow use with a wide variety of toolholding systems.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron
【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Hymnorq 13PC Metric M35 Grade Cobalt Steel Twist Drill Bits – Metal Index Organizer Case and Straight Shank – 1.5mm to 6.5mm – Ideal for Drilling Cast Iron, Stainless Steel and Other Hard Materials
COBALT STEEL – Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
135°SPLIT POINT – the 135°quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from “walking and wanding”. Easy cutting without need of center punch..
FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
13PC METRIC SET – The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a metal indexed storage case for easy transport to your worksite..
DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would ge....
uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit
Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
