ORICO Tool-Free USB 3.1 Type-C to M.2 SATA SSD External Enclosure Adapter Support NGFF SATA Based M.2 2280 2260 2242 2230 SSD Hard Drive Enclosure Adapter- TCM2F Black
TOOL-FREE DESIGN: Tool-free design allows quick and easy installation of your M.2 NGFF SSD, less than 3 minutes to install SSD and plug in..
Type-C INTERFACE: Adopting type-c interface, both sides can be inserted. USB 3.1 Gen 1 supports up to 5 Gbps data transfer speed..
CLEAR DESIGN: ORICO M.2 SATA adapter made of high-quality transparent crystal PC material, The clear NGFF SSD case make it easy to identify the hard....
COOLING EFFECT: The copper bars with holes on the PCBA board, Aluminum alloy plate on one side and the thermal pads can ensure a perfect cooling....
WIDE COMPATIBILITY: ORICO M.2 to USB 3.1 Type-C enclosure adapter supports Windows / Linux /Mac OS. Fit all size of M.2 NGFF SSD(2280 / 2260 / 2242 /....
SSK Tool-Free M.2 SATA SSD Enclosure Reader USB 3.1 Gen 2 6Gbps Type-C External SSD Adapter Support UASP Trim for M2 SATA NGFF 2242/2260/2280 SSD with B Key/B+M Key for M.2 SATA SSD only
【Applicable SSD】– This USB-C Gen 2 6Gbps M.2 SSD Enclosure supports SATA-based M.2/NGFF(B Key&B+M Key) SSD 2242 2260 2280mm solid state drivers,....
【Tool-Free】- Tool-Free design allows quick and easy installation of your M.2 SATA SSD.Both side can be inserted.
【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.
【Blue Indicator】- Blue Indicator shows the data transfer status, easy and clear.
SSD file system must be supported on host operating system to be....
【High Quality Master Chip】- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and extend the....
SSK Aluminum M.2 NVME SSD Enclosure Adapter, USB 3.1/3.2 Gen 2 (10 Gbps) to NVME PCI-E M-Key Solid State Drive External Enclosure Support UASP Trim (Fits only NVMe PCIe 2242/2260/2280)
【Applicable SSD 】- This M.2 SSD Enclosure only for NVMe M-Key M.2 SSD (PCIE-based). Applicable to sizes 2242 / 2260 / 2280 solid state drivers. Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs..
【Type C interface】- Both side can be inserted.
USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds.
Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps..
【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.
【Blue Indicator】- Blue Indicator shows the data transfer status, easy and clear.
【High Quality Master Chip】- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and exteend the lifetime of SSD. Compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC..
SSK Aluminum USB C to M.2 NVMe SSD Tool-Free Enclosure Reader, USB 3.1/3.2 Gen 2(10Gbps) to NVMe PCI-E M-Key Solid State Drive External Adapter Support UASP Trim (Fits only NVMe SSDs 2242/2260/2280)
【Compatibility & Hight Speed 】- This USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds.
Backward compatible with USB 3.1 Gen2 and USB 3.0 up to 5Gbps. M.2 M-key SSD Enclosure only Suitable for NVMe M-Key M.2 SSD (PCIE-based). Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs..
【Tool-Free 】- Tool-Free design allows quick and easy installation of your M.2 NVMe SSD, surpassed the tradition and completely saving the trouble of screwing, easy to use and portable.Capable of performance over 800MB/s read/write when using high performance NVMe media.
【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.
Note: NVMe SSD is not included. Includes 2 x Thermal Pad，both USB Type-C and USB 3.0 (Type-A) cables..
【Blue Indicator 】- Blue Indicator shows the data transfer status, easy and clear.
SSD file system must be supported on host operating system to be accessible. As with all SSDs, new media must be formatted before use..
SupaGear M.2 Duplicator NVME/SATA M.2 SSD/SD Express Card Docking Station for M2 SSD M Key&M+B Key,Supports Hard Drives up to 8TB with Offline Clone Duplicator and Auto Sleep Function Up to 10Gbps
【Easy Operation】docking stations are very easy to use, no need any tools. , no drivers required. Except the SSDs, you do not need to....
【Multiple data conversion】Achieving USB data transition from M.2 SSD to M.2 SSD/PC/SD Card/MacBook Transfer between data, Supports DATA....
【Efficient Heat Dissipation】Stereo solid-state hard disk box offline clone base, fast heat dissipation, better protection of hard disk..
【ONE-KEY OFFLINE CLONE】This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity,....
【Plese Note That】This Docking Station only Support M key or B+M key SSD. Does not Supports plug & play and hot swap.The capacity of the....
ORICO Upgraded Aluminum M.2 NVMe SSD Enclosure to USB C USB 3.2/3.1 Gen 2 (10Gbps) to NVMe PCI-E M-Key SSD External Adapter Support UASP Trim Smart (Fits NVMe SSDs 2230/2242/2260/2280) -M222-Gray
Heat Dissipation: After optimization and upgrading, the M222 M.2 ssd enclosure adopts ORICO's unique metal cooling vest, with a long silicone thermal pad, which wraps the SSD in all directions and conducts heat accurately. The heat dissipation efficiency is 20%-30% higher than that of ordinary M.2 solid state drive enclosures..
Speed: USB 3.2 Gen2 supports data transfer speeds up to 10Gbps for stable and efficient transfers. Tested by the ORICO laboratory, the continuous read and write speed can reach 1000-1200MB/s after the nvme ssd is installed..
Compatibility: M.2 form factor is compatible with M.2 PCIe NVME M key, NVMe B+M key, size: 2230/2242/2260/2280. Not compatible with M.2 SATA SSDs, original MACBOOK SSD, PCIe AHCI SSDs..
2-in-1 Cable: The USB cable that comes with the M.2 adapter has 2 output ports, USB C to A (10Gbps) and USB C to C (10Gbps). Adopt high-quality TPE two-in-one data cable, aluminum alloy interface, support PD60W fast charge..
Design: The M.2 to usb adapter adopts an ultra-thin all-aluminum shell, the striped shell increases the heat dissipation area. Stylish, durable and convenient, perfect for travel and business office. Plug and play, no additional drivers required, USB cable powered..
Installing four NVMe SSDs in this enclosure which supports Thunderbolt 3 expands the capacity to 8TB, 4 M.2 SSDs upto 32TB..
Supports RAID0, RAID1, RAID5, and JBOD. Help you accelerate, expand, and back up your data..
The all-aluminum enclosure provides better protection and maximizes cooling performance, built-in temperature control system and disk health monitoring system..
Must be paired with a PD 30w power supply to operate properly. USB C 33w adapter and 1.5m/4.5ft PD cable are included..
Support four NVMe SSDs, each SSD exclusive to PCIe X1 bandwidth, quad SSDs share the bandwidth of PCIe 3.0 X4(Thunderbolt 3 40Gbps)..
Plug&Play, four disks raid speed up to2700Mb/s (MAX 4000-4500Mb/s), single disk speed is 900-1500Mb/s..
Package: NVMe Enclosure Docking Station, Thermal compound pads X4, Thunderbolt 3 cable, PD 33W adapter, PD 1.5m/4.5ft USB C Cable.
ZTC 2-in-1 Sky 2.5” Enclosure M.2 (NGFF) or mSATA SSD to SATA III Board Adapter. Multi Size Fit with High Speed 6.0GB/s. Model ZTC-EN005
M.2 (NGFF) & mSATA to SATA III 2.5" Enclosure..
Green LED indicates power status and Red LED indicates active status.
Data transfer rate: 6Gb/s up to 520MB/Sec.
Short circuit protection NOTE: 1) Make sure your drive is compatible with this device. This device only supports M.2 NGFF or mSATA SSD's. 2) .While handling your SSD, special precautions should be taken to prevent damage caused by static electricity. Failure to do so may lead to component failure. 3) Make sure your SSD is firmly conected. 4) Ensure connecting components were not damaged while installing your SSD,.
UGREEN 2.5 Inch Hard Drive Enclosure Integrate with 1.6FT Cable, Tool-Free SATA to USB 3.0 7mm 9.5mm External SATA SSD HDD Case with UASP, Laptop Computer Hard Disk Enclosure
Integrate with 1.6FT Cable: High-quality 1.6FT USB 3.0 cable integrated with the hard drive enclosure, so no need to worry about losing the cable when you want to back up data from dead old laptops, upgrade HDD to SSD for additional storage or downloading game. Lightweight & slim size plus undetachable cable make the hard disk enclosure perfect for travel. Note: SSD or HDD is NOT included.
Tool-Free Installation: This 2.5" hard drive enclosure is very easy to assemble and disassemble, just drop the drive in, snap the case back together and plug in, the external hard drive enclosure can be immediately recognized by PC, works instantly as a backup unit or additional storage device, truly plug and play..
5Gbps Super Speed: With standard SATA III and USB 3.0 connection, this HDD SSD enclosure can support up to 5Gbps transmission speed. Accelerated by UASP protocol, making the HDD SSD case 70% faster than traditional USB 3.0. UGREEN SATA enclosure can backward compatible with USB 2.0 port..
Wide Compatibility: The solid state drive enclosure is suitable for 7mm and 9.5mm 2.5 inch SATA III/ II/ I HDD SSD, compatible with Samsung Seagate WD Toshiba, etc. UGREEN laptop computer hard drive enclosures can be quickly recognized by Windows 11/ 10/ 8.1/ 8/ 7/ V....
