Best Machine Air Plasma Cutter

Plasma Cutter 50Amp Non-Touch Pilot Arc 110V/220V ±15% Dual Voltage 1/2'' Clean Cut,IGBT Inverter High Frequency Portable Plasma Cutting Machine

  • Powerful Cutting Ability:10-50A dc output,1/2” ideal clean cut and 3/5'' maximum severance cut on 220V. 10-35A DC output,1/3" ideal clean cut and 2/5" maximum severance cut on 110V[Breaker Recommendation:50A on 110V,30A on 220V].
  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal..
  • Application Widely:Work with the non-hazardous compressed air to cut stainless steel,alloy steel,mild steel,copper,cast iron and chrome.Suitable for businesses and DIY users but also fully accommodating the demands of professional operators..
  • Safe Design:Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control.When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch extend consumable life.The lightweight model makes the machine very convenient to carry anywhere..
  • Warranty Service:The plasma cutters offer 30-Day 100% satisfaction or money back guarantee and 1 year limited warranty,you will get a local supports for you need.Buy with confidence.Work with standard parts, you can easy to find the consumables from our shop..
Check Stock

Plasma Cutter Machine,MYYWELD Dual Voltage 110/220V 50A，Portable Air Plasma Cutting Equipment Max Cutting Thickness 15mm,IGBT Inverter 1/2\ Clean Cut, High Frequency Cutting

  • Dual Voltage-Automatic Dual Voltage / Dual Frequency (110 V/220 V 50/60Hz). Voltage compensation function to deal with fluctuation of the power network..
  • Safe & Protection- Beautiful plastic panel design. With over-heat, over-pressure, over-current and IP21 level protection, the cutting machine works in a more safer and professional way. Should the plasma cutter be used to an excessive level, or in high temperature environment, poorly ventilated area or if the fan malfunctions the Thermal Overload switched on to cool down inside temperature. The machine will be able to run again when the internal temperature reaches safe level..
  • High Efficient & Widely Application- Latest IGBT invert technology, equipped with high quality PT31 cutting torch. Fast cutting speed, low noise, and smooth cut just like a hot knife cutting on the butter. Available for cutting most metals: stainless steel, alloy, aluminum, mild steel, carbon steel.
  • widely used for automotive, ducting work, repair/maintenance, metal processing, manufacture..
  • Accessories-User guide, 1pcs PT31 cutting gun(5M), 1pcs ground clamp(2M), 1pcs transparent hose(3M), 1pcs conversion line, 4pcs hose clamp, 2pcs electrode, 2pcs copper nozzle, 1pcs pressure value, 1pcs pressure ....
Check Stock

Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel).
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze.
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts.
  • LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible.
  • RUGGED- All metal case. Built to take the day to day.
  • MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 15.125" (384.18 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Plasma Cutter, HeroCut 45i, 110 Voltage IGBT Inverter Air Plasma Cutter 6mm Clean Cut, 10mm Severance Cut In 70PSI (CUT45i 110v)40A or 63A Power Breaker is suggested

  • Plasma Cutter Input Voltage 110V, 60Amps Power breaker is suggested. 40Amps cutting current,High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40Amps.
  • Very compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. 1 year warranty for machine..
  • Input voltage is 110V 50/60Hz, 60Amps Power breaker is suggested. Machine maybe explode if plug it to 220V, Make sure you fix machine to correct voltage, Better use 60Amps power breaker for this machine..
  • 40Amps output, Duty cycle 60% in 40Amps, 100% in 35Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range..
  • We supply high quality machine, very lightweight but powerful, Very easy to carry, Machine come with quality accessories and torch parts, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum. ( search torch consumables at amazon ASIN: B08BCLNL5B ).
Check Stock

Thermal Dynamics Cutmaster 42 40 Amp Tip 9-0094, 5 pack

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch (Torch Ref. Code 7-0040).
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0094, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

hynade Plasma Cutter, Dual Voltage 115/230V 40A Plasma Cutting Machine, Inverter Metal Plasma Cutter Max Cutting Thickness 12mm (HYC45D 115/230V)

  • ✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness 10mm@65PSI 40A 230V.
  • ✌ Very good to cut car steel (frame), Very light weight and compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, 2mm thin Copper, 4mm Aluminum, It is High frequency touch metal arc starting..
  • ✌ Input voltage is 115/230v, Max current is 35Amps under 115V clean cutting thickness 4mm @65PSI 35A 115V. Max 40Amps under 230V, Clean cutting thickness 8mm@65PSI 40A 230V 45A up Power breaker is suggested..
  • ✌ Function, Machine with current LED display, 115/230V power lamp, Current knob, Time for post air can be adjust. Duty cycle 60% in 40A, 100% in 30Amps, Maybe the cutting arc not stable if the air less or over the range. We suggest air pressure 65PSI (0.6Mpa), You can get reading from air gauge which come with machine..
  • ✌ hynade is high level brand at welding field. We focus on welding business more than 20 years. Also we have a service team in American..
Check Stock

Pilot Arc Plasma Cutter,120/240V Dual Voltage Non Touch Plasma Cutting Machine Max Cutting Thickness 14mm Clean Cutting Thickness 10mm in 65PSI

  • THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for....
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and....
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this....
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer....
Check Stock

ICE-60T/TM Plasma Torch Electrode Tip 212724 219676 Drag Shield 212730 for Miller Spectrum 875 Cutter 35pcs

  • 35pcs Plasma cutting consumables kit equivalent to Miller Spectrum 875 cutter ICE-60T ICE-60TM plasma cuttin torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 20pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

  • Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
  • Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
  • Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
  • 12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
  • What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock