Overall length: 95mm / 3.74". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement..
If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
RIDGID 29983 Model 223S 1/4\ to 1-1/4\ Inner/Outer Copper and Stainless Steel Tubing and Pipe Reamer
COPPER AND STAINLESS STEEL TUBING REAMER: Provides quick and easy reaming on stainless steel and copper tubing and pipes with an outside diameter capacity of 1/4 in. to 1-1/4 in..
INNER/OUTER MECHANISM: Features 45 cutting edges on the interior cone allowing for fast and clean inner reaming and outer deburring and beveling of tubes.
ERGONOMICALLY DESIGNED: Features convenient knurled edges for a superior grip during the reaming process.
CONVENIENT MEASUREMENT BAR: Dual imperial inch and metric measurement bar for extremely easy adjusting and usage.
DURABLE CONSTRUCTION: High-quality hardened steel build provides maximum durability for a long service life that can withstand heavy-duty and daily use.
3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
5/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
7/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
9/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
3/4 " shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
3/4 " shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
