RocRide Single Chainring Bolt Set Comes With 5 Bolts And Can Be Used On Chainrings That Require 4 or 5 Bolts. 7mm Thread Depth. 10mm External Width. Use for Hole Depths of 5-9mm..
Bolts Are Available in Durable Steel for a Classic Look or Lightweight Anodized Aluminum to Match Your Chainring Color. Colors Include Black, Blue and Red..
Aircraft Grade 7075-T6 Aluminum Is Strong And Lightweight with Each Bolt Weighing Around 1.5 Grams Each..
Classic Look Steel Bolts Provide Rugged Durability and Weigh Around 4 Grams Each. BOLTS WILL NOT BE LONG ENOUGH to add accessories like bash guards to chainring. For that purpose you should use a double or triple width bolt..
Bolts are 2 Piece Design and Require a Standard Chainring Bolt Wrench to Install or Tighten. We Recommend Steel Bolts Be Tightened to 12Nm..
OEMTOOLS 26691 Nut Bolt Thread Gauge, Green Thread Checker and Bolt Size Gauge, Bolt Sizer with Thread Gauge, SAE and Metric Thread Gauge Reference
Five-Trick Pony: Measure hex nuts, washers, regular and countersunk bolts, and gauge fastener thread counts in one fell swoop with this bolt and nut sizer.
Find It Fast: Identify the size of a hex nut or washer in a snap using gauge holes cut into the thread guide for nuts and bolts.
Identify Stray Fasteners: This nut and bolt thread checker will save time and prevent stress by confirming your hardware size every time with its multiple measuring systems.
Knowledge is Power: The bolt gauge anticipates any measurement needed for both SAE and metric units.
The reverse side is embossed with thread gauges to identify bit thread counts.
Product Details: Bolt sizing gauge measures 8-3/4” x 3-3/8”.
Resistant to water, alcohol, oil, and grease-related damage.
Printed measurements are easy to read and fade-resistant.
Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the Rotary Thread Starter Kit..
Unlike traditional thread repair tools that come in standard sizes, the RT1 and RT2 that comes in this kit is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RTK1 Starter Kit has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
CDHPOWER 29'/700C Black Aluminum Mag Wheels - 66cc/80CC Gas Motorized Bicycle
Please note£ºexcluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles.
do not need adapter, sprocket only needed.
put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding£»inner diameter of rim:17.5mm/0.689inch.
Aluminum Wheels Excluding chain drive Sprocket£»Thread size: 1.375 inch X24T.
the hole spacing for front and rear wheel both 44mm, please see the last picture£»NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
Size for Wheel Axle: LxT(front axle): 160mm x 10mm.
light and very durable. 29"/700c Size Wheel.
the hole spacing for front disc brakes of mag wheel to be added is 44mm.
PLEASE NOTE 1: the best safe speed if racing: 35km/h£»Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDH alum wheel.
Precision forged, acid and alkali resistant, corrosion resistant and resistant to oxidation.The thread is smooth and flat, the squat is evenly stressed, and the screw teeth are stronger..
Carriage bolts are designed to fasten a wooden face to either wood or metal.Flat, smooth head eliminates the need for a washer..
Due to the head there is no groove type that can be used with a power assisting tool. It can also be hidden during actual use to prevent disassembly..
✩U-Bolts Specification: U-Bolts Diameter (M6) x Overall Width x Overall Height: (5.2 x58 x 50 mm) / (1/4" x 2-1/4" x 1.96"). Groove Width: 38mm / 1-1/2". Perfectly Suitable for Round Tube Size 38mm(1-1/2"). M6 Self-locking Hex Nuts Thread Length: 28mm. With Corresponding Flat Gaskets. Surface Color: Silver..
✩Application: Round U-Bolts Designed for Securing Various Products to Round Wood and Metal Objects. It Is Widely Used In Cars, Boats, Plumbing, Other Home and Industrial Applications..
✩Steps for Usage: 1. Choose the Corresponding U-Bolts Specifications According to the Size of Pipe 2. Drill Holes in the Connection 3. Lock Nut and Flat Washer..
✩Material: High-strength SUS304, Acid and Wear Resistance, Anti-rust, Moisture-proof and Corrosion-proof. No Burr, Smooth Thread. It still performs well in the seaside, rainy and humid environments..
✩Package Content: 4 U-shaped bolts, 8 Self-locking Nuts, 8 Flat Washers, Easy to install, Uniform Force, Strong and Durable..
POWERTEC QTB1008 T-Slot Bolts 1/4”-20 Thread Size T-Bolt 1.5 Inch Long – 20 Pack
Includes: (20) tee bolts 1/4”-20 thread bolt and 1-1/2 Long.
Function: essential Jig and fixture hardware designed with precision machined t-heads that fit inside routed grooves and T-slots, allowing the tightening and customization of your own jigs an easy task.
QUALITY: T-Bolts are made from high quality zinc-plated carbon steel for corrosion resistance, rust protection and long lasting durability.
Design: able to withstand strong torque with heavy usage, and won’t easily strip, nor over-tighten.
Bolt size and thread: length 1. 5” | T-shaped heads 13/16” by 17/32” by 7/64” thick | 1/4”-20 all thread.
Screw length (including the neck): 2-1/2 inch or 63mm.
Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners..
Carriage bolts have a dome shaped head and a square neck generally requiring a hex nut and flat washer. The square neck makes them self-locking when used within a square hole..
