Best Machinery Vacuum Laminated Glass

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • ...any of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision..
  • Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64” OD a....
Check Stock

Labnique Glass Vacuum Filtration Distillation Apparatus with Compact Vacuum Pump, 1000 ml

  • Glass Vacuum Filtration Distilation Apparatus, 1000ml flask with 300ml funnel.
  • The complete set Includes a graduated funnel, a glass funnel, a filter flask and an aluminum clamp..
  • Pore size on the base is 10 micron. Fit with 42-60mm membrane filter paper.
  • The low level vacuum (about 120 mmHg) produced by the included pump is perfect for lab vacuum filtration uses. It takes only a few minutes to filter 1000ml solution (time may vary depends on your solution)..
Check Stock

zdyCGTime 3.5mm AUX and USB Panel Flush Mount Cable USB & 3.5mm Audio Female to USB and 3 RCA Female Extension Mount, Dash Mount, Flush Mount Panel Mount Cable for Car Boat Motorcycle(3.5mm&USB, 1M)

  • Suitable for use in a reciprocating motion of the occasion, can be built-in cable, tubing, pipe,plumbing, . play traction and protection..
  • Each section towline can open, easy installation and maintenance. Exercise low noise, wear-resistant, high-speed movement..
  • The towline has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses..
  • The towline shape like tanks chain, composed by a large number of unit between the rotating freely link..
  • Within the same series of towline high, outside the high, the same pitch, towline in width, bend radius R may have a different choice..
Check Stock

ZKGRAND CNC Dust Shoe,80mm 3.15in ,White

  • This product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly eliminate sawdust and dirt, so as to keep the worktable clean and tidy..
  • Spindle diameter: 80mm / 3.15 inch, vacuum port: 97mm / 3.82 inch,Please confirm the diameter of your router before choosing..
  • The assembly and installation of this product is very simple, and it is easier to replace the drill bit..
  • The brush is easy to disassembly and replace when worn..
Check Stock

CNC Engraving Machine Dust Shoe For 70mm Spindle

  • Spindle diameter: 70mm / 2.75inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture,Please confirm the diameter of your router....
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock

MW Polar Salmon Fillet, 7.05 Ounce

  • Thick Wet-Resistant Cardboard with a laminated foil layer on each side.
Check Stock

DONLAB FLR-01 ASTM STD Glass 100ml SCHLENK Reaction Flask 24/40 Joint with Glass Stopcock

  • Vacuum degree: High Vacuum Valve Stopcork 003e Glass Stopcork 003e PTFE Stopcork.
  • The man-blowing Borosilicate 3.3 glass is uniform and flawfree.
Check Stock

DONLAB FLR-02 ASTM STD Glass 250ml Round Bottom Reaction Flask 24/40 Joint Glass Stopcock

  • Vacuum degree: High Vacuum Valve Stopcork 003e Glass Stopcork 003e PTFE Stopcork.
  • The man-blowing Borosilicate 3.3 glass is uniform and flawfree.
Check Stock

Windshield Repair Kit for Glass - Automotive Glass DIY Windscreen Tool for Fixing Chips, Cracks and Star-Shaped Crack - Nano Fluid Filler Repair Kit Windshield Crack Repair Kit

  • Repair Made Easy - This windshield repair kit is designed to repair small damages in laminated automotive glass windshields. With this kit, anyone to fix a damaged windshield or window. Easily repair many types of laminated windshields or minor damage to the outer layer of glass with little effort..
  • Long Maintenance Effect Duration - It can solidify quickly, Most of our customers can complete their repair in the morning and use it again in the evening. And the duration of the effect after curing is long, can withstand severe winter or hot summer..
  • Wide Application - The glass repair kit can quickly and effectively repair small damages in 20-30 minutes. Suitable for small chips, bulls-eyes, star-shaped, half-moon crescents, cracks no larger than 12 inches/30 cm, and spherical damage no more than one inch in diameter are the best candidates for this kit..
  • Save Cost - The high-quality windshield crack repair, which can help you minimize the appearance to achieve better repair effects - everything you need to achieve professional results with no experience and little effort..
Check Stock

CNC Engraving Machine Dust Shoe For 85mm Spindle

  • Spindle diameter: 85mm / 3.35inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture,Please confirm the diameter of your router before choosing..
  • The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment..
  • It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy..
  • This brush is easy to remove and replace when worn..
  • Assembly and installation of this product is very simple, and it is easier to replace the drill bit..
Check Stock