Best Machining Milling Machine

ISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC

  • Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
  • Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
  • ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
  • Grade or Coating Type: Uncoated / Coating Layers: Uncoated.
Check Stock

Drill America - DWRRTS1INCH 1\ High Speed Steel Taper Shank Straight Flute Chucking Reamer, DWR Series

  • Durable: Made of premium high speed steel, with high hardness and good toughness, durable to use..
  • 8 Sizes: 8 pieces HSS straight flute reamer, shank Diameter- 3/4/5/6/7/8/9/10mm..
  • Cutting: With sharp cutting edge, the reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • Application: Widely used for bore machining, installed in drilling machine, milling machine,and screw machines etc..
  • 100% Satisfied Service: Enjoy a smooth & worry-free return service within a month. Any questions feel free to contact us, we will be here for you..
Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

  • APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
  • U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • MATERIAL: high speed steel, high hardness, good wear resistance and durability..
  • 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

CNC Milling Kits NT30-FMB22 Collet Chuck Holder + 50 Cutter + APMT1604 Milling Inserts Strong Rigidity for CNC Milling Machine(#1)

  • Benefits of this product family : CoroMill 390 covers many applications with a large versatile programme including cutter versions for shoulder milling and long edge milling.
  • The cutters generate a good quality 90-degree shoulder and are ideal for ramping and helical interpolation.
  • ​The light-cutting insert geometries and high-performance grades of CoroMill 390 are designed for low cutting forces and vibration-free machining for secure milling in all materials.
  • ​Experience the benefits of internal coolant available on most CoroMill 390 cutters.
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock