...g: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
5 Core uses highly adhesive in the assembly of the Speaker for strong bonding between all parts of it....
CT Sounds MESO8-4 8” Pro Audio Midrange Loudspeaker, 275 Watts RMS, Each
CT Sounds meso 8 inch single 4 ohm midrange loudspeaker.
Power handling: 275 Watts RMS | 550 Watts MAX, Sensitivity: 96 dB, Frequency response: 120 Hz – 7,000 Hz, Impedance: Single 4-Ohm.
Utilizing a Y35 ferrite magnet and 8mm T-Yoke, this 8 inch loudspeaker gets the most out of its motor design and can handle more power than the competition.
The custom tooled basket (no other brand in the world utilizes this basket) effectively allows the spider to be positioned higher inside the basket preventing the spider and lead wire from hitting the front plate at high power levels.
Built using a CCAW voice coil, this 8” midrange car speaker boasts a sensitivity rating of 96 dB and plays louder than speakers that use copper voice coils at middle to high frequencies.
CT Sounds MESO65-4 6.5 Pro Audio Midrange Loudspeaker, 250 Watts RMS, Each
CT Sounds 6.5 inch single 4 ohm midrange loudspeaker.
Power handling: 250 Watts RMS | 500 Watts MAX, Sensitivity: 96 dB, Frequency response: 140 Hz - 6,000 Hz, Impedance: Single 4-Ohm.
Utilizing a Y35 ferrite magnet and 8mm T-Yoke, this 6.5 inch loudspeaker gets the most out of its motor design and can handle more power than the competition.
The custom tooled basket (no other brand in the world utilizes this basket) effectively allows the spider to be positioned higher inside the basket preventing the spider and lead wire from hitting the front plate at high power levels.
Built using a CCAW voice coil, this 6.5 midrange car speaker boasts a sensitivity rating of 96 dB and plays louder than speakers that use copper voice coils at middle to high frequencies.
Pyle 4'' x 6'' Three Way Sound Speaker System - Pro Mid Range Triaxial Loud Audio 240 Watt per Pair w/ 4 Ohm Impedance and 3/4'' Piezo Tweeter for Car Component Stereo PL463BL
TRIAXIAL SPEAKER SYSTEMS: The woofer feature an eye-catching blue poly injection cone for plenty of stiffness without added weight The 1-inch ASV voice coil is ready for high-temperature, high-wattage situations.
LOW IMPEDANCE: Pyle 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars It also make the most of every 240 watt your car stereo can deliver.
MIDRANGE TWEETER: Pyle Pro three way sound speaker system has one-inch neodymium film dome midrange and 3/4-inch piezo tweeter that complete the package It helps to provide smooth, loud and detailed sound in each pair.
DEFINITE STRUCTURE: The 20 oz magnet structure, 1” neodymium film dome midrange, and ¾” piezo tweeter are what power these speakers and allow for a 95Hz - 20Khz frequency response Also, it features standard 4'' X 6'' size fits OEM locations.
POWERFUL FEATURES: The non-fatiguing butyl rubber surround keeps your speakers secure and extending the life of the product A 1” high-temperature ASV voice coil provides the richest sound, ensuring low distortion and providing an open sound stage.
(4) Rockville RMC80LB 8\ 800w Black Marine Speakers w Multi Color LED + Remote
Price is for (2) Pairs of Rockville RMC80LB 8" 2-Way Black Marine Speakers Totaling 1600 Watts!.
Includes: Pair of 8˝ marine speakers. 16.4 feet of Speaker Wire. Mounting Screws. LED Remote Controller.
Features: Rockville RMC80LB 8” 2-Way 400 Watt Marine Boat Speakers in Black. CEA Compliant Power Ratings. Power Rating: 400 Watts Peak /100 Watts RMS Per Speaker..
System Power: 800 Watts Combined. 19 Dynamic LED Modes. 20 Switchable static LED Colors. 256-Grade PWM. Adjustable LED Strobe Speed. 5 Adjustable LED Brightness Settings. Slim Card Type LED Remote. Demo LED Mode. Included Remote can be paired with one or more speakers. 8“ 2-Way Speaker System. Fully Marinized Against Salt & Fresh Water Conditions. Completely Waterproof and rustproof. Stainless Steel Terminals..
Molded ABS plastic basket. Polypropylene Mica Injected Cone. Rubber Surround. High quality ferrite magnet. 13mm (0.5” inch) Polymer Tweeter. Oversized 1” CCAW Kapton Voice Coil. Pre-installed mounting screws included. Perfect for both marine, outdoor, and car use. Impedance: 4 Ohms. Frequency Response: 40Hz - 20KHz. Sound Pressure Level: 91dB @ 1w/1m. Total Diameter: 9.65”. Cutout Diameter: 7.36”. Total Height: 4.8”. Mounting Depth: 3.54”. Cutting Template.
(4) Rockville RMC65LS 6.5\ 1200w Silver Marine Speakers/Multi Color LED+Remote
Includes: Pair of 6.5? marine speakers. 16.4 feet of Speaker Wire. Mounting Screws. LED Remote Controller. Features: Rockville RMC65LS 6.5 2-Way 300 Watt Marine Boat Speakers with LED Light System in Silver. CEA Compliant Power Ratings. Power Rating: 300 Watts Peak /75 Watts RMS Per Speaker.
System Power: 600 Watts Combined. 19 Dynamic LED Modes. 20 Switchable static LED Colors. 256-Grade PWM. Adjustable LED Strobe Speed. 5 Adjustable LED Brightness Settings. Slim Card Type LED Remote. Demo LED Mode. Included Remote can be paired with one or more speakers.
Fully Marinized Against Salt & Fresh Water Conditions. Completely Waterproof and rustproof. Stainless Steel Terminals. Molded ABS plastic basket. Polypropylene Mica Injected Cone. Rubber Surround. High quality ferrite magnet. 13mm (0.5 inch) Polymer Tweeter. Oversized 1 CCAW Kapton Voice Coil.
Pre-installed mounting screws included. Perfect for both marine, outdoor, and car use. Impedance: 4 Ohms. Frequency Response: 55Hz - 20KHz. Sound Pressure Level: 91dB @ 1w/1m. Total Diameter: 7.09. Cutout Diameter: 5.31. Total Height: 2.48. Mounting Depth: 2.48.
10 Inch Car Subwoofer Speaker - 500 Watt High Powered Car Audio Sound Component Speaker System w/ 2 Inch High-Temperature Kapton Voice Coil, 85.6 dB, 8 Ohm, 60 oz Magnet - Pyramid PW1048USX
500 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250 watt RMS so you can play your favorite tracks as loud as you want and with style.
NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 4.21” mounting depth for easy installation.
2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 85.6 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" black strong non-pressed paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet.
60 OZ MAGNET STRUCTURE: This subwoofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped steel basket that provides a strong foundation. It is also super easy to install to your vehicle's sound system.
12 Inch Car Midbass Woofer - 700 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 35Hz-4kHz Frequency, 90 dB, 8 Ohm, 60 oz Magnet - PylePro PPA12
700 WATT POWER: This high powered audio projection woofer system has a maximum power output of 700-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
35Hz - 4kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 35Hz - 4kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 90 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
12 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 12" woofer strong black paper cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
60 OZ MAGNET STRUCTURE: This woofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped plastic basket & cloth edge suspension provides a strong foundation. It is also super easy to install to your vehicle's sound system.
Pyle 8 Inch Car Midbass Woofer - 360 Watt High Powered Car Audio Sound Component Speaker System w/High-Temperature Kapton Voice Coil, 200Hz-5kHz Frequency, 94 dB, 8 Ohm, 35 oz Magnet - PDMR8
360 WATT POWER: This high powered audio projection midbass system has a maximum power output of 360-watt peak power / 180 watt RMS so you can play your favorite tracks as loud as you want and with style.
200Hz – 5kHz FREQUENCY RESPONSE: This high-performance car midrange woofer has a frequency response of 200Hz – 5kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
KAPTON VOICE COIL: This car speaker has 1. 5” high-temperature kapton voice coil, 94 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
8 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 8″ midbass paper coating cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.
35 OZ MAGNET STRUCTURE: This mid speaker has 35 oz magnet structure. The heavy-duty housing and structure provides a strong foundation, and it is also super easy to install to your vehicle’s sound system w/ 3. 03” mounting depth.
Lanzar Upgraded Standard 6” x 9” 3 Way Pair of Triaxial Speakers - Powerful 600 Watts and 4 Ohms 2.5” Polymer Cone Midrange 1” Tweeter 40 - 22 kHz Frequency Response and 36 Oz Magnet Structure - MX693
Lanzar Upgraded Standard 6” x 9” 3 Way Pair of Triaxial Speakers - Powerful 600 Watts and 4 Ohms 2.5” Polymer Cone Midrange 1” Tweeter 40 - 22 kHz Frequency Response and 36 Oz Magnet Structure - MX693.
40 - 22 kHz FREQUENCY RESPONSE: Lanzar, standard 3-way car speaker system has a robust 36 oz. magnet structure and frequency response that complete the package. Also, pack with 2.5'' polymer cone midrange and 1'' titanium dome tweeter for sweet highs.
4-OHM MIN IMPEDANCE: This triaxial car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. Includes custom wire-mesh grills, wires and installation hardware for easy setup.
MX693 TEMPLATE: Lanzar upgraded car speaker measures 76mm x 111mm with a mounting depth of 3.39''. The high-quality injection cones and non-fatiguing butyl rubber surround provide a strong foundation.
ALUMINUM VOICE COIL: Lanzar speakers are capable of 1.25” higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
