Best Makita Battery Powered Router

WDINLY Mobile Hotspot Router Unlocked Portable Hotspot Wireless WiFi Router with SIM Card Slot for Travel Camping and Business Support B2/B4/B5/B12/B17 Network AT&T/T-Mobile Including 1G SIM Card

  • 1.WDINLY portable wifi is mobile hotspot device with card slot & Lithium battery 1800mAh, Internet access to internet via HSPA/LTE Data SIM Card. with battery powered ,use for indoor or outdoor without broadband place,put it into your pocket, enjoy WiFi anytime and anywhere,Stable signal: 150Mbps transmission rate, stable signal, easy to enjoy 4G life..
  • 2.WDINLY portable router wifi travel with 4G to WiFi, Support 4G FDD B2/B4/B5/B12/B17. WCDMA:B1(2100Mhz).Network Frequency Mainly applicable to USA/Canada/Mexico, wireless internet for tablet& mobile Phone &PC support 10users at the same time and use more than 8 hours of the battery life Stay connected all day..
  • 3.WDINLY unlock hotspot devices with sim card  Easy to connect and easy to carry in hand,Portable WiFi thatGoes Where You Go,With the WDINLY Wifi router, you can connect your favorite devices to Wifi and experience the ease of having your own secure network connection in your pocket,suitable for travel, business trips, office, camping, mountain climbing, wild survival, multiplayer games and other places..
  • 4.Your personal wifi connection everywhere ,insert SIM card then Install the battery (tear off the insulating film). Even if your SIM card is compatible with the hotspot wif....
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

KOWOOD Plus Round-Over Router Bit Set 1/4 Inch Shank Radius in 1/8” 5/32” 3/16” 1/4” with Updated Kowood C3 Carbide Great for Round Edges Ideal for Table Drawer or Cabinet Edges

  • KOWOOD Plus round over router bit set is an upgrade router kit designed for create flush decorative round edges..
  • KOWOOD Plus designed for Woodworking Lovers or Carpenter, provide a next-level experience..
  • KOWOOD Plus series router bits are all upgraded KOWOOD C3 carbide. This series of bits are in a heat-treated process, providing maximum durability of....
  • Wide range of applications, suitable for dense wood, laminate, particleboard, and plywood..
  • Universal 1/4" tool holder is suitable for all major desktop router workbenches, such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter....
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Exmate 10.8V 2.5Ah Li-ion Replacement Battery for Makita BL1014 BL1013 194550-6 194551-4 195332-9 Battery Pack

  • Battery Type: Li-ion | Capacity: 2500mAh | Voltage:10.8V.
  • Compatible with Makita 10.8V Li-ion battery BL1014 BL1013 194550-6 194551-4 195332-9,completely meets makita OEM battery standards..
  • Perfectly compatible with all makita 10.8v cordless power tools DT01W DF030D TD090D FD01W RJ01W LC01Z LM01W DF330D FD01ZW TD090DW..
  • CE, FCC, RoHS Certified, each battery had passed the test of over charge, over discharge, short circuit, high temperature, high humidity, internal overheating..
  • 30 days money back and 12 months limited Warranty and 24 hours' friendly customer service! If you have any issues, please feel free to contact us!.
Check Stock

Kowood Pro Adjustable Tongue and Groove Bit Set, 1/2 Inch Shank, Cutting Height Adjustable Tongue & Groove Router bits Kit

  • KOWOOD PRO Tongue and Groove router bit set is an upgraded new product. Which is specifically designed for the high quality demanded by woodworking industrial application..
  • KOWOOD PRO C3 carbide with a new process of heat treatment shank support this set of bit in heavy-duty and maximum durability..
  • Precisely machined carbide for clean and accurate trimming, grooving for all types of wood material. With adjustable washer to adjust the spacer quantities as necessary to achieve the desired fit..
  • Wide use application and suitable for woods, laminate, particle board, plywood compact panel..
  • Universal 1/2” Shank is suitable for all major benchtop router tables such as KOWOOD, Bosch, DeWalt, Makita, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker. (benchtop router table use only)..
Check Stock

Lasica 2 Pack 3.0Ah 10.8V BL1013 / 12V BL1014 Max Lithium-Ion Rechargeable Batteries Compatible with All Makita 10.8-Volt and 12-Volt Max Li-ion Cordless Tool Battery Packs 194550-6 194551-4 195332-9

  • 【Great Replacement for Makita Battery 10.8V/12V】Perfect Replacement for Makita BL1014 12V Max Lithium-Ion Battery / Replacement for Makita BL1013....
  • 【Widely Compatible with Makita 10.8V/12V Max Lithium Tools】Lasica 12V Max Lithium-ion batteries BL1014 are 100% compatible with all previous....
  • 【10.8/12Volt High Output Batteries】High capacity 10.8/12V 3.0Ah battery pack, 2X more runtime than the original 1.5 Ah battery. Use international....
  • 【Safe & Reliable】Install Easily and it fits perfectly: Compact and Lightweight - Smaller and Lighter than NiCd batteries.
  • 【What You Get】2-Pack 10.8V BL1013/12V BL1014 Max Lithium Batteries. 90-Days Money Back and 12 Months Warranty! Please REACH OUT to us on your....
Check Stock