Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (1/4 Inch OD)
You are provided: the package comes with 7 pieces 1/4 inch direct pneumatic parts (PU), 7 pieces 1/4 inch V two-way parts (PV), 7 pieces 1/4 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
Different styles can suit different pneumatic piping needs.
Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
The sealing element has good sealing performance and is not easy to leak.
The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
These push to connect fittings are easy and convenient for you to operate.
Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (3/8 Inch OD)
You are provided: the package comes with 7 pieces 3/8 inch direct pneumatic parts (PU), 7 pieces 3/8 inch V two-way parts (PV), 7 pieces 3/8 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
Different styles can suit different pneumatic piping needs.
Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
The sealing element has good sealing performance and is not easy to leak.
The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
These push to connect fittings are easy and convenient for you to operate.
Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
PureSec Quick Connect Fitting End Plug 1/4 inch + 3/8 inch Plug Combo Hose End Plug Pipe Plug RO Tube Plug KIT (20, 1/4\ + 3/8\ Tube O.D.)
★ATTENTION:This Plug Combo is designed for use with quick fittings to plug unused leg/branch, It cannot inserts into RO tubing directly..
★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system..
★SIZE AND QUICK FITTING COMPATIBLE WITH: 1/4" Tube O.D. and 3/8" Tube O.D..
Fits standard 1/4" or 3/8" RO quick Fittings..
★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense..
★FUNCTION&QUALITY: This plug fitting inserts into a quick fitting to close and terminate its end. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality..
SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter
...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps
【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK
...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Home TZH Pipe Fitting, 30 Pack 1\ Grey Floor Flange/Elbow/Tee Combo for Industrial vintage style, Flanges/Elbow/Tee with Threaded Hole for DIY Project/Furniture/Shelving Decoration (30, 1\)
Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
Wide Application: Our pipe fittings come in 30 Packs(10 Flange,10 Elbow and 10 Tee) for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow/tee/pipe flange are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will brin....
3 Packs 3/4 Inch GHT Female to NPT Male Connector, GHT to NPT Adapter Brass Garden Hose Connector Adapter Fitting to Pipe Fittings Connect with 6 Packs Extra Rubber Washer (1/2 Inch NPT Male)
Type: 3 Packs standard 3/4 inch garden hose thread female to 1/2 inch national pipe thread male with 6 packs extra rubber washer.
Material: these hose connectors are made of solid brass, durable and rustproof, more reliable than aluminum or plastic materials.
Size: garden hose thread: 3/4 inch GHT female.
Rubber washer: outer diameter is 25 mm/ 1 inch, inner diameter is 16 mm/ 5/8 inch, and its thickness is 3 mm/ 1/8 inch.
No leakage: these rubber faucet washers are designed with 4 small outer tabs to fix them in place firmly and properly, preventing washers from falling out of the hose fittings, do not interfere with the functionality of hose washer.
These garden washers fit all standard 3/4 inch garden hose fittings.
Application: our GHT female to NPT male connector has 2 sizes, including 3/4 inch GHT female to 3/4 inch NPT male, and 3/4 inch GHT female to 1/2 inch NPT male, please check your suitable hose size.
