Prevent Freezing of Water Line – This winterize blowout adapter kit helps to winterize garden hose, sprinkler systems, faucets, by blowing out water from the water lines/plumbing. It is an environmental friendly winterization way, which greatly reduce the chance of using antifreeze.
Trusted Quality – The fittings made of lead-free brass which contain less than 0.25% lead, care for your health and safety. It is not easy to break or deform, ensure long-lasting service time.
Wide Range of Uses – A quick and easy way to blow out the water lines of your RV, motorhome, camper, boat, and travel trailer, sprinkler systems, outdoor plumbing, garden hoses and more.
Easy Operation – Comes with a 3/4 Inch Female Garden Hose Threading for you to connect the gardening pipe. Besides, two black washers included to prevent leakage between the water tube and water tap.
Standard Threaded Connection – With a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread, easy attach air line to water lines or hose system. You can rotate around the Air Flow Regulation Ball Vale to open or close and adjust the air flow rate.
Horiznext npt 1/2 stainless steel hex pipe fitting 3/4 inch male thread O.D water hose connector for valve shower tube air line outdoor drain pneumatic hydraulic system 4 pcs
Measurement: 0.5 inch thread, length:1.57 inches..
Hex nipple connection type: NPT 1/2 male X NPT 1/2 male (National Pipe Thread)..
Material: 304 Stainless Steel with great resistance to corrosion.(Brass is too flimsy and will broke in use), which can be connected to copper, brass, plastic, aluminum, and welded steel..
Available for full range of liquids and gas, water, air and some corrosive liquid..
Working Temperature: -100 to +660 degrees ℉ Maximum working pressure:290 psi.
6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse
PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe
Adapter for connecting pipes or fittings of different types.
Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
3 Packs 3/4 Inch GHT Female to NPT Male Connector, GHT to NPT Adapter Brass Garden Hose Connector Adapter Fitting to Pipe Fittings Connect with 6 Packs Extra Rubber Washer (1/2 Inch NPT Male)
Type: 3 Packs standard 3/4 inch garden hose thread female to 1/2 inch national pipe thread male with 6 packs extra rubber washer.
Material: these hose connectors are made of solid brass, durable and rustproof, more reliable than aluminum or plastic materials.
Size: garden hose thread: 3/4 inch GHT female.
Rubber washer: outer diameter is 25 mm/ 1 inch, inner diameter is 16 mm/ 5/8 inch, and its thickness is 3 mm/ 1/8 inch.
No leakage: these rubber faucet washers are designed with 4 small outer tabs to fix them in place firmly and properly, preventing washers from falling out of the hose fittings, do not interfere with the functionality of hose washer.
These garden washers fit all standard 3/4 inch garden hose fittings.
Application: our GHT female to NPT male connector has 2 sizes, including 3/4 inch GHT female to 3/4 inch NPT male, and 3/4 inch GHT female to 1/2 inch NPT male, please check your suitable hose size.