Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
...uspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 10 PCS: Male 90° Elbow connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs....
Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs
【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)
MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Set of Brass Garden Expanding Hose Joint Male Pipe Adaptor Repair with Quick Connector Fitting
Heavy-duty brass construction with rust proof. Follow the instructions when repairing water pipes, and they do not fit for thicker outer hose cloth expandable hoses..
Pipe joint diameter is 10mm/0.39″. Note: The outer diameter of the hose should not exceed 0.47”(11.8mm). And these pipe fittings are quick connector system, not 3/4″ thread..
Make quick, effective repairs to an expandable hoses. Suitable for most quick male end connectors (outer diameter 16mm), secure Fit, no-Leak connection. Not 3/4″ thread..
They can be use garden hose mender, end hoses male mender, end hoses female mender..
Include: 2 x brass female quick connectors, 1 double male quick connector.
ALAMSCN 30 Pairs JST-XH Connector Kit, XH 2.54mm 2/3 / 4/5 Pin Header Male and Female Connectors Plug Adapter with Flat Wire Cable 150mm 24AWG Compatible with JST XH
Quantity: 10 x 2pin male plug with cable + 10 x 2pin female plug.
10 x 3pin male plug with cable + 10 x 3pin female plug.
5 x 4pin male plug with cable + 5 x 4pin female plug.
5 x 5pin male plug with cable + 5 x 5pin female plug. 30pairs in total..
24 AWG JST XH 2.54mm 2/3/4/5 pin micro male connector match well with female connector, easy to install and usem, meet your different installation needs..
Material: Tinned copper wire, plastic head at each end..
Widely used in mini RC helicopter，LED strips，electrical appliances, automobiles, robots, lighting, toys,batteries etc..
Prevent Freezing of Water Line – This winterize blowout adapter kit helps to winterize garden hose, sprinkler systems, faucets, by blowing out water from the water lines/plumbing. It is an environmental friendly winterization way, which greatly reduce the chance of using antifreeze.
Trusted Quality – The fittings made of lead-free brass which contain less than 0.25% lead, care for your health and safety. It is not easy to break or deform, ensure long-lasting service time.
Wide Range of Uses – A quick and easy way to blow out the water lines of your RV, motorhome, camper, boat, and travel trailer, sprinkler systems, outdoor plumbing, garden hoses and more.
Easy Operation – Comes with a 3/4 Inch Female Garden Hose Threading for you to connect the gardening pipe. Besides, two black washers included to prevent leakage between the water tube and water tap.
Standard Threaded Connection – With a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread, easy attach air line to water lines or hose system. You can rotate around the Air Flow Regulation Ball Vale to open or close and adjust the air flow rate.
