Best Male Threaded Elbow

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....
Check Stock

Irritrol 2600T Angle Valve with NPT Threaded Connection, 1"

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

Home TZH Pipe Fitting, 30 Pack 1\ Grey Floor Flange/Elbow/Tee Combo for Industrial vintage style, Flanges/Elbow/Tee with Threaded Hole for DIY Project/Furniture/Shelving Decoration (30, 1\)

  • ... flange are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Industrial charm. Home TZH elbow decoration combined with a little creativity can go a long way to update a lavatory without breaking the wall..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our floor flange and we promise that you will not be disappointed..
Check Stock

Ivilon Bay Window Curtain Rod Corner Connector - for Rods of 5/8 to 1-1/8 Inch - Warm Gold

  • Includes 2 elbow corner connectors for bay window curtain rods or poles..
  • Neat connection design that can be adjusted from 90 to 180 degrees..
  • Decorative and made of premium zinc metal with a durable finish for long lasting..
  • No extra tools are required. Includes threaded screws of 1/4-20 inch. Compatible with all rods with a threaded end of 1/4"..
  • Minimalist ball design of 1.5-inch diameter fits rods from 0.5 up to 1.125 inch..
Check Stock

3/8\ OD Tube 316ss Single Ferrule Elbow Fitting Parker 6-6 EBZ-S

  • Package Content : 30 PCS(Include Nut And Ferrule).
  • Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale..
Check Stock

Stanbroil 90° Elbow Connector Replacement for Olympian Low Pressure Gas Fired Heaters - 3/8 Female Flare x 3/8 Male Flare

  • Perfect for use with the Wave 3, or catalytic safety heaters..
  • For use with our Olympian low pressure gas fired heaters..
  • The elbow is able to provide easy installation..
Check Stock

STYDDI Low Pressure 3/8inch Male Flare Propane Adapter Conversion Fitting with Elbow 90 Degree for Blackstone Tabletop Grill Compatible with Blackstone 17 Inch and 22 Inch Portable Gas Griddle

  • SPECIFICALLY DESIGNED FOR BLACKSTONE 17”and 22”TABLETOP GRIDDLES. The connector is specifically designed to work with the blackstone 17" & 22"....
  • CONNECT YOUR GRILL TO RV OR TRAILER LOW PRESSURE SYSTEM WITHOUT REGULATOR. The adapter converts your 17inch and 22 inch Blackstone Grill to a 3/8 male....
  • 3/8”MALE FLARE PROPANE ADAPTER PLUG SERVES MANY PURPOSES. This adapter helps convert a Blackstone griddle to allow connection to the low pressure....
  • 90 DEGREE ELBOW DESIGN SAVES MORE SPACE. Different from the shape of other product on the market, this adapter fitting is designed as 90 degree elbow,....
  • 100% SOLID BRASS CONSTRUCTION FOR DURABILITY. Made of premium material of 100% brass, the fitting provides secure and safe connection from your grill....
Check Stock

Dixon DCP25S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting, Plug, 3/8\ Coupling x 3/8\ NPT Male

  • Air Chief industrial interchange quick connect plug for connecting directly to a hose with a male NPT end to connect with a female NPT threaded connection.
  • Air Chief industrial interchange quick connect plug with a male NPT threaded end.
  • Valveless construction allows flow when disconnected.
  • Stainless steel 303 for better machining characteristics than stainless steel 316.
  • Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).
Check Stock

Mic Stand Adapter Set,8 Pcs Mic Thread Adapters-5/8 Female to 3/8 Male and 3/8 Female to 5/8 Male, 5/8 Female to 1/4 Male and 1/4 Female to 5/8 Male-Screw Adapter for Microphone Stand Mic Boom Arm

  • 【High Quality】 Made of aluminum alloy,well-coated with frosted black paint,these microphone stand adapters are anti-corrosion,anti-rusted,durable and reliable,sturdy and firm,not easy to break or fade,offering you a long service life..
  • 【Stable Mounting】 Adopted the non-slip and knurled surface, deep threaded without burr design, each mic stand screw adapter offers you firm grips,mounting your devices more stable! No worry of falling or breaking.And the clear thread inside enables you to screw easily and smoothly..
  • 【Wide Applications】These mic threaded adapters of 4 types are widely used in most types of mic stands, mic clips, camera stands, recorder stands and other same thread accessories,enable you to gain more rig combination possibility and freedom..
  • 【Easy To Install】 A slot on the bottom of 5/8 male to 3/8 female and 5/8 male to 1/4 female screw adapter is designed for microphone stand, you can easily install and remove them. All mic stand adapters are well-packed in a small bag, very lightweight and easy to carry..
Check Stock

Lyn-Tron, Aluminum, Male-Female, 8-32 Screw Size, 0.25\ Width, 1\ Body Length (Pack of 10)

  • Hex standoff separates or connects components in a system for precise placement and can be gripped at its flats with a wrench or pliers for tightening.
  • Aluminum provides corrosion resistance, is lightweight, and has good electrical conductivity.
  • One end is threaded male, and the other end is threaded female.
Check Stock