28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)
This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
0.3-3.2 Clamping Grinder Chuck Key M8 for Car Garages(Short tail M8x0.75 chuck + rod set)
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Grinder Chuck Key Drill Chuck Carbon Steel M8 for Car Garages(Short tail M8x0.75 chuck + rod set)
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
HEYMOUS Ring Mandrel Metal Ring Sizer Set with Jewelry Rubber Mallet Hammer Rings Size Measuring Tools Finger Gauge Wood Ring Shaper Tool Jeweler's Repair Kit
Metal Ring Mandrel - Made of aluminium material, marked with US Size standard, grooved size marked ring mandrel, fine workmanship With round outside and flat inside, smooth edges do not hurt your hands..
Metal ring sizer set - Made of steel, US size 0-13, come in half sizes.The ring sizes are clearly marked, easy to use and accurate to the size. Great for someone get into jewelry-making as hobby and on-line shopper for ring size determining..
Wood Mandrel - Used for ring repair, shaper, polishing and sanding, high quality jewelry making tools. (Note: There are no sizes marked on the wood mandrel).
Jewelry Rubber Mallet - Working with rubber hammer to fix or regulate rings,rubber head would not leave traces on the jewelry or damage your jewelry.Provide perfect strike without scratching or damaging the surface of materials..
Ring shaper repair tools kit essential for professional and beginners, designed for ring size measurement, work great for the ring forming, shaper perfectly. Good for fix bent rings, making the bent ring round again. Designed for wire working,craft wire, wire wrapping and wire jewelry, easy to use..
Dremel 709-02 110-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray
Hole Saw Quick Change Mandrel 7/16\ Shank New Hole Saw Arbor Fit 9/16\ to 10\ Hole Saw , Extra Pilot Drill Bit & Bi Metal Hole Saw, Big Value
This New kit includes: 1pcs 7/16” Hexagonal groove Large Quick Change Mandrel with 5/8” thread. It fits 1.21” to 10” hole saw, 1 Adapter with1/2” thread fits 0.55” to 1.2” hole saw..
Extra: 1set 1” ,1-1/4” Bi-metal hole saw(Max cutting depth 1.50”), 1x 4.35”, 2x3.5” silver HSS Drill bits with ¼” shank for arbor(only drilling for wood & soft metal),3x3.5” black HSS Drill bits with ¼” shank for arbor( for hard metal). 8×1” CrV Screwdriver BITS, 1 magnetic bit holder. It’s a Big Value..
The Large Arbor's plastic block is easy to grasp and force, and the material is light, strong, and clean. This plastic body is passed drop test and torque test..
This New quick change arbor kit is for quick connecter connection, convenient installation and unloading, large torque.
Time-saving to use is more than the traditional arbor 2 times..
This large arbor & adapter fits full size hole saw from 0.55” to 10” (14mm to 250mm) hole saw with 1/2.
