PHYNEDI 3846Pcs RC 2020 LR 11000 Crane Bricks Model with 10 Motors for Liebherr Crane DIY Engineering Construction Collection Building Toy Set MOC-39663 Licensed and Designed by OleJka
Simulation Rc Model: Designed and licensed by OleJka. The reference prototype is 2020 LR 11000 Crane. he height of the crane is about 2 meters and the....
The crane can be assembled and disassembled from the horizontal state back to working state without any manual assistance. It has 4 pneumatic....
426cm Pneumatic Hose: Driving and steering, one XL motor per track. Torque increased by 1:25 rotation 2 M motor, SA frame winch L motor, main boom....
Compatible with All Major Brands: Designed in accordance with universal standards, Our building bricks are compatible with your existing name brand....
1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
.WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
.2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
.Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
.This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
.1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces
Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
Note: when installing the check valve, pay special attention to the flow direction of the medium.
The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Watts Brass & Tubular 2T-M2 Washing Machine Water Shut Off Valve
WASHING MACHINE SHUT OFF VALVE: This manual washing machine shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine..
WATER SHUT OFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2″ threaded or 1/2″ solder copper x 3/4″ washing machine hose threads on hot & cold-water outlets..
SINGLE LEVER CONTROL SHUT OFF VALVE: It is manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses.
INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places..
BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves..
【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
INTBUYING Pneumatic Air Tapping & Drilling Threading Machine Air Drill Tapper Flexible Arm (M3-M12 Tap Collets Vertical)
Tapping Ability of Pneumatic Tapping Machine: steel/aluminum: M3-M12, stainless steel: M3-M8, Range of Rotation: 400rpm(stepless speed regulation), Working radius:39.37"(1.0m),Working pressure:0.6-0.8Mpa.
Pneumatic Tapping Machine: Avoid the limitations of manual tapping, time-saving and labor-saving, no damage to thread, and the tap is not easy to break. Wide range of activities, heavy workpiece do not need to be moved.Smaller gas pressure and gas (5-8Kg / cm2), large torque output..
Premium Quality: M3-M12 Pneumatic Air Tapper adopts high strength aluminum alloy, smooth running, low noise, stable performance, simplified operation. Clamping cylinder with overload protection device can avoid tap damage.
Applicable Materials: M3-M12 Air Tapper can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
Heavier work matter does not need positioning device or mobile, installed plus universal head can easily get.Rapid fast positioning and high cutting speed, increased production capacity..
Bottle Jack 20 Ton Air Hydraulic Bottle Jack Blue Air Car Jack Heavy Duty Repairing Lift
Air/Hydraulic Bottle Jack: VEVOR 20 tons/44092 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
6-5/8" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 20 tons/44092 lbs and has a lifting range of up to 10-1/4 in/26 cm to 20 in/51 cm..
Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
Considerable Details: A compact structure with dual fast retractable springs to ensure the product can be successfully reset after use. The height of the rod can be adjusted flexibly. Rod adjustable height: 3-1/8 in/8 cm..
Heavy-Duty Steel Structure: This pneumatic bottle jack is made of Q235 steel material, providing maximum durability and security. The highly rugged construction provides both power and security. With our bottle, there is nothing to worry about..