Best Marine Engine Oil Pressure Sender Switch

Motorcraft FL-910S Oil Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

Motorcraft FL1AB12 Oil Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

Motorcraft FL1HP Oil Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

Mercruiser Engine Oil Change and Sterndrive Gear Lube Maintenance Kit

  • Fits all Mercruiser sterndrive GM engines (except 4.3L V6 without remote oil filter).
  • Includes Water Separating Fuel Filter 35-802893T & Oil Filter 35-866340K01.
  • Includes 2-4-C Marine Grease 92-802859A1.
  • Includes SAE 25W-40 Marine Engine Oil 92-8M0078628 and 92-8M0078627.
  • Includes 3 Quarts High Performance Gear Lube 92-858064K01 with Washers and Gear Lube Fill Pump.
Check Stock

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock

Sunpro CP7001 Sport ST 2" Electrical Oil Pressure Gauge Kit

  • Reads 0-100 psi with a 90 degree dial sweep.
  • 2 inch black face to be mounted in a 1-1/6 inch hole.
Check Stock

Genew Oil Change Pump Extractor 12V 80W Diesel Fluid Oil Quick Extract Transfer Pump Scavenge Suction Kit for Car Boat Motorbike Truck RV ATV and Other Vehicles

  • NEW SMALL PUMPS - portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used....
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you....
  • SAFE & SIMPLE OPERATION - Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use,....
  • HIGH-Current ALLIGATOR: Fully surrounded handle, effectively preventing leakage or short circuit. This clip is made of pure copper with good....
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP- The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift,....
Check Stock

DRIVESTAR M340 Engine Oil Pump 2004-2008 for Ford F-150/Expedition/Explorer/Mustang,for Lincoln Navigator/Mark LT 5.4L 4.6L

  • Fitment:Oil Pump for Ford 2005-2014 Expedition,2006-2010 Explorer,2007-2010 Explorer Sport Trac,2004-2010 F-150,2005-2010 F-250 F-350 Super Duty,2005-2010 Mustang,for Lincoln 2006-2008 Mark LT,2005-2014 Navigator,for Mercury 2006-2010 Mountaineer.
  • Replace Oil Pump Number:M340,2244-3663,9L3Z-6600-A,3L3Z6600AA oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock