Sika Anchorfix-2, Super Strength anchoring Adhesive, Two Component Anchor System for Threaded Bars in uncracked Concrete, 10.1 fl. Oz & Bosch HC2083 1\\/2 in. x 8 in. SDS-Plus Bulldog Rotary Hammer Bit
Product 1: Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
Product 1: SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
Product 1: USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
Product 1: PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
Product 2: Optimized brazing and hardening process for long life.
Product 2: 15 percent faster (compared to S4L).
Product 2: Bosch-made carbide tip is tougher and more durable under heavy loads.
Product 2: Proprietary Bosch hardening process results in more holes per bit.
Putty comes in a 2 oz. Container and delivers on a tough seal that is potable water safe and even certified by NSF.
A 2-part adhesive made up of an epoxy resin putty and a hardener putty, this repair system can be mixed with a little kneading in order to form a hard, durable, permanent and waterproof bond.
It will stand up to most common solvents, will not shrink, easily bonds to Damp surfaces, and even cures under water.
great for bonding metal, masonry, brick, wood, glass, ceramic, rubber and more.
Within as little as 60 minutes, you can sand, drill and paint the putty, and it cures white for seamless repair blending.
The repair putty is formulated to bond, fill, seal and rebuild, which makes it an ideal choice for sealing pipes, fixing leaks in tanks and drains, and repairing appliances, tools, furniture and more.
3M Performance Plus 8979 Duct Tape Heavy Duty Slate Blue 48 mm x 55 m 12.1 mil 6 Month Clean Removal Resists UV and Weather for up to 12 Months Tears Cleanly Curl-Resistant 1 Roll
PROFESSIONAL GRADE SLATE BLUE DUCT TAPE – Outdoor, UV-tolerant duct tape maintains versatile performance when exposed to the elements. Ideal for tough, demanding applications in the construction, electrical, HVAC, industrial, marine and plumbing markets.
REMOVES CLEANLY FOR UP TO 6 MONTHS – Whether indoors or outdoors, removes from most opaque surfaces with no adhesive residue for up to six months even after sun and weather exposure.
STICKS IMMEDIATELY – Thick rubber adhesive attaches well to masonry and other rough surfaces, while cloth-reinforced backing resists curling and conforms to curved and irregular surfaces.
WIDE RANGE OF CONVENIENT SOLUTIONS – Commonly used for sealing and protection, with the high tensile strength needed for heavy bundling, reinforcing, tabbing, taping, capping and splicing of materials including piping, conduit and insulation.
Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile
✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
3M 8979 Performance Plus Duct Tape, Slate Blue, 48 mm x 22.8 m x 12.1 mil – High Performance Tape for Splicing/Taping Insulation, Capping Pipe, Temporary Repair and More, 1 Pack
PROFESSIONAL-GRADE DUCT TAPE – Ideal for tough, demanding applications in the construction, electrical, HVAC, industrial, marine and plumbing markets.
STICKS IMMEDIATELY – Thick rubber adhesive bonds well with masonry and other rough surfaces, while cloth-reinforced backing resists curling and conforms to curved and irregular surfaces.
RESISTS WEAR AND LIGHT ABRASION – sunlight and weather exposure, and removes cleanly for up to 6 months from most opaque surfaces with no adhesive residue, indoors or outdoors.
WIDE RANGE OF CONVENIENT SOLUTIONS – Commonly used for sealing and protection, with the high tensile strength needed for heavy bundling, reinforcing, tabbing, taping, capping, and splicing of materials including piping, conduit and insulation.
EASY TO SEE – Bright slate blue color makes for easy identification and a great choice for marking and labeling applications.
GET A TIGHT SEAL – Provides a moisture-resistant tight seal for many containment operations such as attaching heavy poly draping and closing cuffs.
EXCELLENT ADHESION to hard-to bond woods. This toughened, versatile liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
IDEAL FOR BONDING dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours..
OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass. Can also be used to wet out and bond fiberglass tapes and fabrics..
MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for r....
Waterproofs exterior below grade concrete or masonry.
Apply with a push broom or a 6” masonry Brush.
Cleans up with soap and water immediately after use. Recommended for: Concrete, masonry, basement walls, foundation and retaining walls. Coverage: Base Coat: 225 square feet at 1/16 IN dry-film thickness.
Top Coat: 450 square feet at 1/32 IN dry-film thickness. Coverage will vary depending on surface texture and porosity.