Best Masonry Supplies

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

Hubbard Barrel Jointer Assembled With 7/8-3/4 And 2 Extra Blades

  • The Original Hubbard Jointer Often Copied, Never Duplicated.
  • Masonry Hand Tools Fabricated Of 100% American Made Material.
  • Includes one Jointer assembled with one 3/4 And One 7/8 Blade.
  • Designed With Interchangeable, Replaceable, Hardened Tubular Steel Blades.
  • A High Quality Masonry Hand Tools For The Professional Bricklayer And Mason..
Check Stock

BEST CONCRETE AND MASONRY FORM STAMP KIT - BEST USE FOR COUNTERTOP EDGES, INCLUDES 10 SMALL HAND STAMPS 7\

  • Best Concrete and Masonry Form Stamps - 10 Small Concrete and Masonry Form Stamps included in this set, Sizes approximately 6.
Check Stock

Freemason Logo - Illuminati Square & Compass Unisex Hoodie Sweatshirt (Red, XX-Large)

  • Lapel Pin, Masonic Logo Mason, Freemason Freemasons Free Mason Masons Masonic Masonry Freemasonry Past Masters' Emblem Shriner,york Scottish Rite, ,Grotto,movper, Craft Lodge Entered Apprentice Fellowcraft Master Rose Croix Lodge Perfection, Commandery Kinghts Templar.
Check Stock

GIRtech FIRECAST Refractory castable, Cement 3110 F 30 LB

  • Concrete mix GIRtech FIRECAST is designed for molding refractory products by vibro casting, pouring the brickwork lining layer into the forms, and repairing masonry/joints of heating units..
  • Concrete mix GIRtech FIRECAST is a multifunctional refractory product..
  • Designed for molding refractory products by vibro casting (fireplaces or stoves elements), pouring the brickwork lining layer into the forms.
  • Repairing masonry/joints of all kinds of heating units.
Check Stock

Kett KSV-434 120-Volt Vacuum Saw

  • Cuts straight or angle up to 45 degree by adjusting the cutting fence.
  • Multi Purpose Cut off machine for cutting angle, pipe, tubing, steel rod and with abrasive masonry blades for cutting brick, concrete blocks and various masonry materials.
  • Can quickly adjust the vise with quick-release knob.
  • Cuts up to 5-1/8" material at 90 degree angle.
  • Cuts up to 4-1/8" round material at 45 degree angle.
Check Stock

NP1 POLYSEAL WHITE 10OZ

  • MasterSeal NP1 10.1 Oz. Polyurethane Sealant, White NP1WHT12.
  • A versatile moisture-curing high-performance polyurethane sealant with permanent elasticity (Formerly: Sonolastic NP 1)..
  • or use on active, vertical and horizontal interior, exterior joints including expansion wall joints, floor and pavement joints, curtain walls, panel walls, precast walls, window frames, structural components, dams, spillways, and storm water drains..
  • Substrates include concrete, masonry, aluminum, and wood. Bonds to concrete, masonry, and other materials without a primer..
Check Stock

1/4 Slotted Hex Washer Head Tapcon Style Masonry Concrete Screws Qty 1000 1/4 x 2-3/4

  • 1/4" Diameter Slotted Hex Washer Head Masonry Screws.
  • Blue Ceramic Coating for Extended Corrosion Resistance.
  • Masonry Drill Bit Size: 3/16", Hex Driver Size: 5/16".
Check Stock

ROK 4-1/2 inch Diamond Saw Blade Set, Pack of 3

  • 1 continuous rim For Smooth cutting of marble, granite, tile & ceramics.
  • 1 segmented rim For Fast general purpose cutting for masonry, concrete, pavers, Terrazzo, Roof tile..
  • 1 turbo rim For smooth & fast cutting of masonry, concrete, pavers, Terrazzo, Roof tile..
  • Can be used wet or dry, fits angle grinders with a 7/8" or 5/8" Arbor (adapter included for 5/8").
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock